Product Description:
Automatic handling, storage, and distribution of the products become easy with our automated warehousing system. Also, our storage facility is timely upgraded to meet the changing market scenario. We efficiently cater to the varied demands of the clients and offer them personalized packaging options as well. We ensure that the products are packed sternly using quality packaging material to evade loss. It is 50 x 50.
Supplier: Vinyl rolling floor, sports floor, rubber floor, luxury vinyl floor tile, stone plastic floor (spc plank), anti static floor and raised access flooring
Product Description: Automatic handling, storage, and distribution of the products become easy with our automated warehousing system. Also, our storage facility is timely upgraded to meet the changing market scenario. We efficiently cater to the varied demands of the clients and offer them personalized packaging options as well. We ensure that the products are packed sternly using quality packaging material to evade loss. It is 50 x 50.
Supplier: Refractory bricks, high alumina bricks, fire clay bricks, sk 34 fire bricks, sk 36 fire bricks, acid resistance bricks,insulating bricks, hfk bricks, cfi bricks, special shaped refractory burner block, refractory tiles, refractory tundish well blocks, refractory nozzle, refractory castables, medium purity high purity castables, low cements castables, refractory mortar, refractory cements, ceramics fiber blankets, ceramics fiber boards, crushed refractory bed materials, bottom pouring sets
Refractory Fire Tile are special type of brick which are form of Refractory ceramic material. It is used for surface lining of Boiler, furnace, kiln, fireplaces & fireboxes. Quality: We offer various quality bricks are IS-6, IS-8, PI - 30% to 70% Alumina offering high temperature resistance of 1100 C to 1700 C & Special brick as per require technical data considering to application of Brick. Sizes (Inch): 24 x 12 x 6 24 x 12 x 3 24 x 18 x 6 24 x 18 x 3
SK 34 Fire Tile are special type of brick which are form of Refractory ceramic material. It is used for inner surface lining of Boiler, furnace, kiln, fireplaces & fireboxes. Quality of Bricks: We offer various quality bricks are 35 to 40%Alumina offering high temperature resistance. Standard Sizes (MM): 400 x 300 x 65 MM
APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.
We are manufacturer of Rubber Tiles used for Flooring purpose in Children Play Area, Industrial Impact Zones, Gurrage, Fatigue Areas, Electrical Shock Areas, School Rubber Racetracks, Health Clubs, Playgrounds, Path & Patios, Hospitals, Gymnasiums, Airports Sport Surfaces, Swimming pool decks, Industrial Impact Zones and many more. Size - 500 x 500 MM, Thickness - 10/15/20/25/30 MM, Color - Multi Colors. We wants to appoint distributors all over the world.
Shapes and dimensions of recycled rubber tiles Hexagon rubber tile 230x230mm Square rubber tile 500x500mm Rubber brick 220x110mm Toothed rubber brick 220x110mm Toothed rubber tile 220x220mm Square interlocking tile 500x500mm |-shaped interlocking 200x160mm
GummiTiles Rubber Floors are made out of 100% recycled rubber and their main advantages are durability and versatility, in addition to being easy to install and maintain, so it is not necessary to invest in additional labor and installation costs. Due to their composition , they are ideal for use on exterior or interior surfaces since they are resistant to climate variability with high and low temperatures and are popularly used in the adaptation of exercise and children's play spaces. Shock-absorbing layer that absorbs impacts in case of falls. This compound has high resistance to wear and aging, ensuring a long useful life and minimal maintenance costs. Installation on a firm concrete or asphalt surface that is properly flattened and leveled Vulcanized rubber that does not lose color over time Measures: 50 cm x 50 cm Thickness: 1 inch (2.5 cm) thick Weight: 18 kg per m Colors: Black Blue Green Terracotta
