Simulate Environmental Testing Chamber

Equipment summary: RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ±1% / the value ±0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:±0.5% / tolerance: ±0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.

Equipment summary: RT-101 Moving die rheometer is a widely used tester in rubber processing industry, rubber quality control and basic research rubber, For optimize formula of rubber provide accurate data, It can accurately measure the scorch time, rheometer time, sulfide index, the maximum and minimum torque and other parameters. Main functions: RT-101 Moving die rheometer used monolithic rotor control, which include: host, temperature measurement, temperature control, data acquisition and processing, sensors and electrical chains and other components. These measurements, temperature control circuit consists of a temperature control device, platinum resistance, heater composition, capable of automatic tracking power and ambient temperature changes, automatically correct PID parameters to achieve fast and accurate temperature control purposes. Data acquisition system and mechanical linkage to complete the rubber vulcanization process of force torch signal automatic detection, automatic real-time display of temperature and settings. After curing, automatic processing, automatic calculation, print vulcanization curve and process parameters. Show curing time, curing power Ju, also has a variety of audible alert. RT-101 Moving die rheometer controlled by computer, the computer setting the parameters of the direct control of test parameters rheometer. Display real-vulcanization curve and temperature curve, store test results, different adjustable comparison of test results and in a different color. Applicable industry: Widely used in rubber products industries. corresponding standard : Accord with GB/T16584 ISO6502:1991 and ASTMD5289-95  Technical parameter: Model: RT-101 Standard: GB/T16584 IS06502 Temperature: room temperature to 200 Centigrade Heating-up: 15 Centigrade/min temperature fluctuation: = ±0.3 Centigrade temperature resolution : 0.1 Centigrade torque range: 0-5N.M,0-10N.M,0-20N.M torque resolution: 0.001NM Power: 50HZ, ~220V±10% Pressure: About 0.4Mpa Air-pressure requirement: 0.5Mpa--0.65MPa (user prepare the dia 8 trachea) Environment temperature : 10 Centigrade--20 Centigrade Humidity range: 55--75%RH Compressed air: 0.35-0.40Mpa Swing frequency : 100r/min(about 1.67HZ) Swing angle: ±0.5 Centigrade ,±1 Centigrade ,±3 Centigrade Printing: Date,time,temperature,vulcanization curve,temperature curve,ML,MH,ts1,ts2,t10,t50,Vc1,Vc2.

Supplier: Universal material testing machine, simulate environmental testing chamber, test equipment

Cryogenic test chamber upto -165 degree C ~ -130 degree C allows to make Cryogenic environment to strength test of metal or use for Cryogenic metal treatment chamber without liquid nitrogen. Applied, international patent registered Operon's The Cryogenic Auto cascade system. Stable Cryogenic Temperature of maximum performance -165 degree C without liquid nitrogen.

KRD50 series transportation simulation test system is to simulate the actual road conditions such as shocks and vibrations during the transportation of various items of a specific load, and to evaluate the effect of the actual working conditions on the loading, unloading, transportation, packaging, sealing or internal structure of the goods. In order to assess or confirm the products and packaging. 1. The method of subband approach is used to simulate broadband random vibration. Each subband contains a main natural frequency and meets the power spectrum of the subband. The vibration magnitude and running time of the test bench are consistent with the actual road spectrum. 2. Adopt truck chassis suspension technology, the acceleration factor can be adjusted; 3. AC variable frequency control; 4. No special foundation is needed, no other complicated operation or installation. Technical Specifications Model Parameters KRD50-200 KRD50-300 KRD50-600 KRD50-1000 KRD50-2000 KRD50-3000 KRD50-4000 KRD50-6000 Max. Load(kg) 200 300 600 1000 2000 3000 4000 6000 Vibration Waveform Broadband Random Instantaneous Probability Density Function Approximately normal distribution GRMS of Acceleration (g) 0.32 Simulated Truck Speed (km/h) 20-80 Simulated Pavement intermediate pavement in tertiary highways & intermediate and low pavement in fourth highways Acceleration Level 1:1 Height of Specimen COG(mm) 500 600 700 800 900 1000 1200 1500 Working Table Size(mm) 1500-700 2000-1200 2200-1200 2700-1650 2700-1800 3600-2600 4000-2800 5000-3500 Consumption Power(kVA) 6 10 12 25 30 40 70 90 Overall Dimension(mm) 1700-850-950 2000-1500-950 2200-1500-950 2900-2200-1250 2950-2250-1250 3600-2600-1450 4000-2800-1550 5000-3500-1750 Weight (kg) 1600 2500 3000 5000 6000 8000 10000 15000 Power Supply three-phase 380V-50/60Hz Working Environment Temperature Range 0-40-humidity 80% (no condense) Standards GB/T4857.15-89 QJ/T815.1-94 QJ/T815.2-94 GJB150.16-86

Model Number: L-BATH series Function: For testing small, middle, large sized battery Volume: 30L 1500L Temperature range:-70 180 C Humidity range: 20%RH~98%RH Hazard Level: Designed to meet the safety functions of EUCAR hazard level up to 6. Standards: Battery Test Chambers meet IEC, UL and a variety of other battery test specifications. Equipped with safety functions that protect again fire and bursting of the battery, including a Magnetic lock, pressure relief vent, forced exhaust and fire extinguisher.

Salt spray test chamber is applicable for the salt spray corrosive test for the protected layer of components, parts, electronic and electrical parts and metal materials and industrial products. Salt spray test chamber can be supplied in two versions the basic salt spray chamber and the cyclic corrosion test chamber cct as applicable for the customers testing and will meet all of the most stringent test requirements.

UV Aging Test Chamber / UV Simulation Environment Test Machine Price $2,070.00/set UV ageing test chamber is suitable for the fluorescent ultraviolet lamp method in the light source exposure method of various materials in the laboratory, mainly for the changes of materials placed outdoors, the improved formula of new materials and the durability test of products. APPLICATIONS 1.Simulate the sun, rain spray and condensation resulting damage to test the materials by exposure to sunlight with moisture and temperature. 2.To get the results of damage after several days or weeks which is equal to expose to outside for a few months. The damages include fading, discoloration, brightness down, powder, crack, blur, brittle, strength decreases and oxidation. 3.Provide reference with testing data for improvement of existing materials, or to assess the impact of changes in product durability and other aspects. Our company Introduction: QINSUN INSTRUMENTS is a professional manufacturer of various kinds of testing equipments over 15 years. HAIDA products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields. Why choose QINSUNï¼? 1.Excellent After sale Serviceï¼? 12 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller. 2. Commitment: We will sign a letter of commitment while we sign the contract, which will improve your confidence to us. 3. Good Packaging: Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.

enviClone Photovoltaic PV Module Solar Panel Wind Resistance Dynamic Mechanical Load Test Machine The PV modules Dynamic Mechanical Load (DML) Test Machine simulates the dynamic load with the pneumatic cylinders and suction cups. Each pneumatic cylinder drives one suction cup, and each cylinder rod is equipped with one tension pressure sensor. Each pneumatic cylinder is a separate control module. Periodic load stress test is performed on the Photovoltaic (PV) Modulesâ?? surface, and PV Modules can be installed according to different requirements. The system also has the ability to monitor the curvature of the PV Moduleâ??s center points in real time. SPECIFICATION Model No.: EVCL-DML-2200, EVCL-DML-2600 Max Dimensions of Tested PV Module Panel 2200 mm x 1200 mm, 2600mm x 1300mm, etc. Quantity for each test 1 Piece of PV Module Pressure Method Pneumatic Cylinders Quantity of Pneumatic Cylinders: 50 pcs, 98pcs, etc (varies as per your Max dimensions of solar panel) Quantity of Pressure Sensors: Each pcs for each pneumatic cylinder The Max Pressure can be tested: 12,000 Pa The Max Pulling Force can be tested: 7,500 Pa Accuracy Deviation: â?¤3% Deformation Sensor: 1 (or customized as per requirement) Controlling Method: Siemens PLC + HM1 Drive Method: Air Compressed Load Amplitude Test Range (Static) Pressure:� +500~12,000 Pa (Continuous, adjustable) Suction:� -500 ~ -7,200 Pa (Continuous, adjustable)�  Note: The test time and pressures can be adjusted during the test every time. Load Amplitude Test Range (Dynamic) Pressure:� -2,500 Pa ~ +2,500 Pa Suction:� -500 Pa ~ -7,200 Pa Frequency:� 3~7 times / min Accuracy Deviation:� â?¤� �±50 Pa. Test Standards IEC TS 62782 Photovoltaic (PV) modules â?? Cyclic (dynamic) mechanical load testing IEC 61215 Ed.3 Static: Forward Direction 2400 Pa�·1 IEC 61730 MST 34 Equivalent: IEC TS 60904-12, IEC TS 61836, ISO/IEC 17025, etc. Wuxi EnviClone Test Equipment Company specializes in environmental simulation test chambers for various industries such as automotives, photovoltaic (PV) modules, solar power, new energy batteries, rubber manufacturing, electronics, military, etc.