Equipment summary:
The machine is applied to test the materials in heat-resistance, cold-resistance, dry-resistance, moisture-resistance. It is simple to operate and program easy to edit. It can show the set values and operative time.
Features:
1.High-texture appearance, the surface handled through the matte stripes, and use of planar non-reactive handles, easy to operate, safe and reliable.
2.Rectangular complex glass window can be viewed the testing sample, windows with anti-sweat heater device that prevents water vapor condensation, and high-brightness PL light.
3.Double-insulated airtight container, which can effectively isolate the internal temperature of leakage.
4.With an external water supply system can be easy to supply water and automatically reuse.
5.Compressor circulatory system from French "Taikang", more effective removal of oil between the condenser and the capillary and use environmentally refrigerants (R23, R404, R507).
6.Controller imported LCD display screen can be displayed measuring values and setting the value and time.
7.Controller with multi-segment program edited, temperature and humidity can be controlled quickly (OUICK) or slope (SLOP).
8.Built-in mobile pulley easy to move and has a strong positioning screw fixed position
Detailed parameters:
Inside size WxHxD (cm) 40x50x40 50x60x50 50x75x60 60x85x80 80x95x80 100x100x80 100x100x100
Outside size WxHxD (cm) 90x136x94 100x146x104 100x161x117 110x171x137 130x181x137 150x186x137 150x186x157
Temperature range -70?~+100?(150?)
(A:+25? B:0? C:-20? D:-40? E:-50? F:-60? G:-70?)
Humidity range 20%~98%R.H.(10%-98%R.H/5%~98%R.H is the specific codition)
Accuracy/ uniformly ±0.1?;±0.1%R.H./ ±1.0?;±3.0%R.H.
Accuracy / volatility ±1.0?;±2.0%R.H./ ±0.5?;±2.0%R.H.
Heating / cooling time About 4.0?/min;about 1.0?/min(5~10?/mm is the specific condition)
Inside material Stainless steel SUS 304#
Insulation material High-temperature high-density amino acid ethyl ester foam insulation materials,
Cooling system Air-cooled/ single-stage compressor(-20?) ,wind, water cooled/two-stage compressor(-40?~-70?)
protection compressor overload switch, high and low pressure protection switch, over-humidity-temperature protection switches, fuses, warning system
accessories recorder(purchase)?view window?50mm testing hole?PL lamp?clapboard?Dry and wet gauze ball
controller TEMI300 digital controller from South Korea
compressor France “Taikang”
power 1F 220VAC±10% 50/60Hz & 3F 380VAC±10% 50/60Hz
Equipment summary:
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ±1% / the value ±0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:±0.5% / tolerance: ±0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
Equipment summary:
RT-101 Moving die rheometer is a widely used tester in rubber processing industry, rubber quality control and basic research rubber, For optimize formula of rubber provide accurate data, It can accurately measure the scorch time, rheometer time, sulfide index, the maximum and minimum torque and other parameters.
Main functions:
RT-101 Moving die rheometer used monolithic rotor control, which include: host, temperature measurement, temperature control, data acquisition and processing, sensors and electrical chains and other components. These measurements, temperature control circuit consists of a temperature control device, platinum resistance, heater composition, capable of automatic tracking power and ambient temperature changes, automatically correct PID parameters to achieve fast and accurate temperature control purposes. Data acquisition system and mechanical linkage to complete the rubber vulcanization process of force torch signal automatic detection, automatic real-time display of temperature and settings. After curing, automatic processing, automatic calculation, print vulcanization curve and process parameters. Show curing time, curing power Ju, also has a variety of audible alert.
RT-101 Moving die rheometer controlled by computer, the computer setting the parameters of the direct control of test parameters rheometer. Display real-vulcanization curve and temperature curve, store test results, different adjustable comparison of test results and in a different color.
Applicable industry:
Widely used in rubber products industries.
corresponding standard :
Accord with GB/T16584 ISO6502:1991 and ASTMD5289-95
Technical parameter:
Model: RT-101
Standard: GB/T16584 IS06502
Temperature: room temperature to 200 Centigrade
Heating-up: 15 Centigrade/min
temperature fluctuation: = ±0.3 Centigrade
temperature resolution : 0.1 Centigrade
torque range: 0-5N.M,0-10N.M,0-20N.M
torque resolution: 0.001NM
Power: 50HZ, ~220V±10%
Pressure: About 0.4Mpa
Air-pressure requirement: 0.5Mpa--0.65MPa (user prepare the dia 8 trachea)
Environment temperature : 10 Centigrade--20 Centigrade
Humidity range: 55--75%RH
Compressed air: 0.35-0.40Mpa
Swing frequency : 100r/min(about 1.67HZ)
Swing angle: ±0.5 Centigrade ,±1 Centigrade ,±3 Centigrade
Printing: Date,time,temperature,vulcanization curve,temperature curve,ML,MH,ts1,ts2,t10,t50,Vc1,Vc2.
Winhealth medical is an enterprise in the life and health, is a national innovation oriented enterprises, is the national health protection products designated supply production units, is china's leading integrated medical health industry company, has set research and development of science and technology, health, engineering, logistics distribution, international management as one of the major health industry chain.
winhealth medical science and technology research and development with the biotechnology center, research center of traditional chinese medicine..
We are the authorized first vendor of ADTech!
KFDA CE approved,
FDA Pending
Price : Negotiable
Pre-Clinical Test Report
Accuracy
- In total samples 93.3% (14/15) - In positive samples 91.7% (11/12)
1. Pre-Clinical Test summary
1) Pre-clinical test is fulfilled by Domestic large clinical laboratory with ADTech COVID-19 IgM/IgG RAPID KIT
2) Tests are made by total 15 samples with 12 positive and 3 negative samples
3) Clinical Laboratory tested the sample with Immunofluorescence Analysis
2. Pre-clinical test result
1) Samples were tested by ADTech COVID-19 IgM/IgG RAPID KIT
2) Test result by ADTechs RAPID KIT
- 4 negatives and 11 positives results in 15 samples
3) Comparison between Immunofluorescence analysis and ADTechs RAPID KIT
- 14 test results are same(including negative and positive results) - 1 samples test result are different(Positive Negative by ADTech
Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry.
The level of Fe% in the slag has been estimated by water displacement test.
This material con offer competitive advantages respect other metal scraps:
Price;
Stable Chemistry;
The material can be loaded loose in 20 heavy duty container.
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires.
Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants.
We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test.
The material can be loaded loose in 40 HC container.
For further details, please feel free to contact us.
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
:
1. >85% Fe Average 600mm Max Fraction
2. >78% Fe Average 20-300mm Fraction
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills.
It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color.
Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating.
From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list
In particular the mill scale can be classified as follows:
Einecs (european commission no.): 266-007-8
Waste code: 10 02 10
Basel code: b 12 30
Hs code: 2619.00
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
- European Code: 19.12.01
- Basel Code: B1010
- HS Code: 2619.0020
- Quantity: 2000 tons currently available
- Monthly quantity: 500-1000 tons depending on production
- Size: 350 1200 mm
- Fe content: from 77 to 86%
- C content: above 2,5-3%
- Bulk density: 2,8-3,4 tons/m3
- Loading type: loose in 20 (26-27 tons on average)
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
For in vitro qualitative detect of Covid-19 antigen in nasal(NS) swab specimens directly from individuals who are suspected of COVID-19 by their healthcare provider within the first 5 days of the onset of the symptoms. This test is only provided for use by clinical laboratories or to healthcare workers for point-of-care testing, and not for at home testing.
1.Easy to collect samples simple operation without professional equipment.
2.The test results are available in 15 minutes, and the test results are clearly visible. 3.Convenient transportation and low price, higher accuracy.
4.Suitable for large-scale rapid screening.
Shelf life: 24 Months
Test Result time: 10 Mins
Packing: 25 Pieces per Box