Usage: The “THE ALL FIBER CAR FURNACE” is a periodic mass-produced whole-?ber car electric furnace. It’s used for normalizing, annealing, quenching and heating for metal mechanical parts, especially for large castings, steel coils, steel strips to and large steel weldments for heat stressing. Features:
1. The structure of whole fiber liner provides good energy-saving performance: energy saving up to 30%. heating up speed twice as fast. Better heat preservation performance compares with similar furnaces. All ?ber structure provides reliable performance under extreme temperature conditions.
2. The furnace body adopts full-fiber ceramic high-purity folding pasting technology, makes it strong and durable, far longer than the normal brick furnace service life.
3. The furnace body uses a mechanical movable sealing structure device which provides reliable sealing.
4. Adopting new type all fiber lining directly hung wire (or strip) structure, that are improving the radiation coefficient of the electric heating element, strengthened the furnace heat exchange, improves the thermal ef?ciency of the stove, and prolong the service life of the component.
5. The whole fiber wall has ten major advantages: A. the proportion is light; B. low heat reservation loss; C. low heat dissipation loss; D. energy-saving effect is good; E. less pollution to the environment; F. long service life: G. the furnace structure: H. fast heating and cooling; I. stoves sealing; J. maintenance is convenient.
6. Process design temperature could be chosen as 1200 C, 1100 C, 950 C and 650 C.
7. Heat source: electric heating, 380v, 50 HZ.
8. Effective workspace: The furnace load volume specification and operation power are enabled for on demand customization.
Our hail protection convinces with strong improvement thanks to years of experience in the field of hail protection and offers the ideal protection against hail and other weather influences for all motorists without a covered parking space or fixed garage. Specifications: Size-S: 406*165*120 cm Size-M: 431*165*120 cm Size-L: 483*178*120 cm Size-XL: 533*178*120 cm Size-XXL:571*203*120 cm Size-LC: 520*178*150 cm Size-GMC: 586*185*160 cm SUV(S): 406*178*145 cm SUV(M): 432*185*145 cm SUV(L): 483*196*145 cm SUV(XL): 533*196*150 cm Pack: Polyester bag
Product of SC Johnson Indonesia All Kit Car Care products: Kit Black Magic Tire Gel, Kit Black Magic Tire Foam, Kit Wash & Wax, Kit Wash & Glow, Kit Detailer, Kit Paste Wax Original, Kit Paste Wax Restorative, Kit Rubbing Compound, Kit Paste Wax New Car, Kit Metalic Car Wax, Kit Gold Series, Kit Protectant, Kit Leather Care, Kit Multi Purpose Cleaner, Kit Wiper Fluid, Kit Auto Glass Cleaner, Kit GP-9, Kit Glass Polish, Kit Metal Polish, Kit Motor Paste Wax.
- Water hyacinth is known for it's soft feel and distinctive smell. When dried it is an excellent fiber to weave furniture and handicraft. Water hyacinth can be transformed into a source of income for communities. All products woven from water hyacinth are strong, attractive and friendly with the environment, bring your sweet home a new breath. - Specification: Use: Material for handicraft Material: Water Hyacinth Color: Natural light brown Size: 0.6-0.8m for raw material Or 10 - 20m for twisted rope Moisture:
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Supplier: All type plastic material recycle (pet bottle, flakes, hdpe, ldpe, pp granular) polyester fiber (hcs, lmf, hollow conjugated fiber for filling, wadding and nonwoven, solid fiber for yarn and nonwoven, low melt fiber for nonwoven )
all type staple fiber production line (polyester staple fiber line, pp staple fiber line, nylon pa6 staple fiber, low melt fiber bi component fiber production line )
all type machinery for plastic recycling.
Buyer: Polyester bottle flakes, fiber machine, bottle flakes
virgin polyester staple fiber 1.2-1.4d 38mm psf fiber Application: 1. yarn spinning, open end spinning and ring spinning, sock yarn, mop yarn 2. needle punch nonwoven, for geotextile, automotive interior, exhibition carpet, trunk nonwoven, insulation panels.
