Usage: The “THE ALL FIBER CAR FURNACE” is a periodic mass-produced whole-?ber car electric furnace. It’s used for normalizing, annealing, quenching and heating for metal mechanical parts, especially for large castings, steel coils, steel strips to and large steel weldments for heat stressing. Features:
1. The structure of whole fiber liner provides good energy-saving performance: energy saving up to 30%. heating up speed twice as fast. Better heat preservation performance compares with similar furnaces. All ?ber structure provides reliable performance under extreme temperature conditions.
2. The furnace body adopts full-fiber ceramic high-purity folding pasting technology, makes it strong and durable, far longer than the normal brick furnace service life.
3. The furnace body uses a mechanical movable sealing structure device which provides reliable sealing.
4. Adopting new type all fiber lining directly hung wire (or strip) structure, that are improving the radiation coefficient of the electric heating element, strengthened the furnace heat exchange, improves the thermal ef?ciency of the stove, and prolong the service life of the component.
5. The whole fiber wall has ten major advantages: A. the proportion is light; B. low heat reservation loss; C. low heat dissipation loss; D. energy-saving effect is good; E. less pollution to the environment; F. long service life: G. the furnace structure: H. fast heating and cooling; I. stoves sealing; J. maintenance is convenient.
6. Process design temperature could be chosen as 1200 C, 1100 C, 950 C and 650 C.
7. Heat source: electric heating, 380v, 50 HZ.
8. Effective workspace: The furnace load volume specification and operation power are enabled for on demand customization.
Usage : The XL Aluminum Alloy Aging Furnace is a energy-saving, cycle type, heat treatment furnace, widely used for rapid quenching solid fusion processes in the automobile aluminum wheel hub, aluminum castings and various kinds of aluminum alloy parts. Rapid job transfers within 10 seconds after the constant temperature time are possible. Fast heat treatment time and temperature uniformity. It can also be used for temper and other materials. Features:
1. Rated Temperature: 600 degrees Celsius.
2. Speci?cation: custom-made according to the requirements of the work-pieces.
3. Power: according to the size of working set.
Usage: The “MAGNETIC HORIZONTAL VACUUM ANNEALING FURNACE” is used for crystallization annealing treatment of soft magnetic core alloy products that made of amorphous and nano crystalline, magnetic alloy materials. Features:
1. The vacuum environment or nitrogen protection environment in the condition of rated temperature does not exceed 600 C .
2. Power: 30 ~ 120 kw (size or parts) according to the requirements of customers.
3. Effective workspace. furnace load volume specifications: on-demand customization.
Rated temperature: 650 C.
Usage: The ” T6 ALUMINUM ALLOY SOLID FUSION/AGING FURNACE” is a cycle type furnace.
It is best suited for solid fusion processes and ageing/hardening treatments that are conducted in the bicycle industry and electric vehicle frame and accessories. Such as 6061, 6063, Series 7 and related materials. For further information and pricing please inquire via email or phone. Features:
1. Rated temperature: 250 degrees Celsius aging / Solid melting 600 degrees Celsius.
2. Specification: Custom made to the requirements of the work piece.
3. Power: According to the size of the working set.
Usage: The “T4 ALUMINUM ALLOY QUENCHING FURNACE” is a cycle type furnace.
It is best suited for solid fusion processes that are conducted in the car and bicycle industry and motor car chassis and accessories. Such as 6061, 6063, Series 7 and related materials. For further information and pricing please inquire via email or phone. Features:
1. Rate temperature: 600 degrees Celsius.
2. Specification: Custom made to the requirements of the work piece.
3. Power: According to the size of the working set.
Usage: The Gas Car Furnace, big trolley, industrial series is a periodic mass-produced car type furnace, made in China. It’s used for the metal mechanical parts, especially for large castings and part like alloy steel, steel coil, steel strip and steel ingot. Furthermore for normalizing, annealing, hardening, the stress relieving and heating purpose. Features:
1. Process design temperature can be chosen as: 1200 C, 1100 C, 950 C and 650 C
2. Heat source: natural gas, liqui?ed petroleum gas
3. Oven door open and close way: so? sealing gate type with all-?ber
4. Car driving way: automatic
5. Lining insulation: full ?ber or hybrid structure
6. Body thermal insulation: lightweight brick and cast-able or tempered heavy brick
7. Smoke evacuation: from top, side, bottom; preheat and recycling
8. Control mode: PC with MT software (touch screen) DCS distributed control (automatic and manual) multi-group or general control
9. Effective workspace, furnace charging quantity speci?cations: on-demand customization
Usage: The “MX CLEANING MACHINE” for continuous oil removal processing of metal parts. Features:
1. Equipped with a strong spray jet ori?ce, smooth mesh belt transmission, ensuring the quality of the parts.
2. Advanced hot air cycling system provides quick-dry speed with low energy consumption.
3. Appropriate accessory for belt furnaces.
4. The before/after cleaning of cast chain combination furnace production line.
Usage: The “BOGIE HEARTH ELECTRIC RESISTANCE FURNACE” series of electric furnaces are periodical electric car furnaces with mass-produced heating function. They are used for mechanical metal parts. Especially for large castings and the following parts: alloy steel; steel coil; steel strip of normalizing, annealing, quenching and heating. Features:
1. Power-driven operation, low labor intensity required.
2. With high strength ultra lightweight refractory brick and refractory ?ber, make it fast heating and excellent heat preservation. Energy saving up to 25% compared to the old RT series furnace.
3. The unique design of oven door increases the performance of the furnace’s temperature uniformity beyond the national standards.
4. Special oven door sealing structure avoids heat loss.
5. Drip device or circulating fan unit can be added as customers’ requirements.
6. Big trolley furnace bottom can be drive by low voltage 36V, safe in operation.
7. Trolley can be customized to tilting actions according to the customers’ requirements.
8. Operation power, temperature, and speci?cations can be modi?ed according to the customers’ requirements.
Usage: The “ALUMINUM COIL ANNEALING FURNACE” is a periodic heat treatment furnace; it’s widely used in the intermediate process of the annealing treatment of aluminum foil, aluminum sheet and aluminum coil and other ?nished semi-?nished products. Features:
1. Stove type: forced hot air circulation annealing furnace.
2. Operation temperature: 100 ~ 520 C (maximum 580 C).
3. Furnace operation volume: 10 ~ 100 t.
4. Furnace temperature uniformity: 5:3 C.
5. Temperature control mode: automatic control.
6. Power source types: electricity, gas, oil.
7. Negative pressure oil removal and nitrogen protection technology are applicable.
8. Fan variable frequency speed regulation; Bypass cooling chamber possible
9. Industrial Operation PC/PLC centralized control: One car for multi furnaces
Usage: “The ANNULAR FURNACE” is a cycle type, heat treatment furnace, it is widely used for quenching heat treatment, conditioning, heating of various kinds of alloy steel parts and long axial workpieces.
Rated temperature: 950 C . 1100 C and 1200 C. Features:
1. Power: 200 ~ 3900 kw.
2. Size: Diameter: (Z500 ~ (Z2200 mm,Depth: 6000 ~ 22000 mm diameter.
3. Depth and power are unique according to the workpiece speci?cations and technical requirements including furnace load volume and heat-up speed.
Usage: The “CLD VERTICAL TYPE ALUMINUM QUENCHING FURNACE” is a energy-saving cycle type heat treatment furnace, is widely used for aluminum wheels, aluminum tubes, aluminum-rod and various aluminum aging (hardening) processes. Features:
1. Rated temperature: 250 ‘C.
2. Speci?cation: custom-made according to the requirements of work-piece.
3. Power: according to the size of working set.
Usage: The “MESH BELT ISOTHERMAL NORMALIZING PRODUCTION LINE – GAS TYPE” is for isothermal normalizing processes of forging the gears of automobiles, motorcycles and other precision billet forging, such as 20Cr‘ 20CrMo, 20CrMnTi, 2OCrMoH‘ 2OMnCr5, 20CrMnT, 17CrNi2) and other mechanical parts. Features:
1. Empty furnace heating-up time: 2 hours or less (room temperature).
2. Work-piece heating time: adjustable in 30-90 minutes.
3. Processing Part: weight: $8.0Kg; thickness: mm; diameter: s200mm.
Production output: 300-1000 kg/h (according to users requirements and component size set).
4. Hardness range: 160-190 hb.
5. Hardness spread: t8HB for the same-batch parts,t5HB for the same-shape parts.
6. Grain size: 5-8; Microstructure: level 1 ~ 3, Bainite: None; Westergren: slevel 1.
Highest temperature: 960 heating coef�cient; 700 isothermal furnace.
7. Heat source: gas.
