l CG610S-P is a high efficient fluid loss additive with high purity and low dosage.
l CG610S-P is applicable in a wide temperature range and is resistant to high temperature.
l CG610S-P has salt resistance and is resistant to saturated brine.
l CG610S-P slurry system is stable with little free fluid.
l CG610S-P slurry system is not retarded, fast strength development.
l CG610S-P slurry system has excellent rheological behavior. It doesn¡¯t require adding additional dispersant.
l CG610S-P is suitable for both water and dry mixed. It has no special requirement on the quality of mixing water and is soluble in cold water.
l CG610S-P can be made into dry mixed type CG610S-D through mixing with materials such as slag, silica flour, fly ash; also made into dry and water mixed dual purpose type CG610S-T.The weight percentage of CG610S-P is 40-60% when made into CG610S-D and CG610S-T.
l CG610S-P can be made into liquid product CG610L through dissolving in the water. The weight percentage of CG610S-P is 20%-30% when made into CG610L.
SPECIAL ATTENTIONS
l CG610S-P¡¯s dosage should be increased if used in brine and high temperature system.
l When CG610 L prepared with CG610S-P is not used at once, specialized bactericide should be added to extend the expiration period.
25kg/bag
Supplier: Demulsifier, pour point depressant, fluid loss additive
Exxon S-150 - a liquid solvent used in many industrial applications such as fuel additives, paints and coatings, pesticide formulations, industrial cleaning, and process fluids. Size: 55 Gallons
Supplier: Sulfonated asphalt, resinated lignite, sulfonated phenol-formaldehyde resin, organic lignite, cementing HTHP filtrate loss reducer, cementing defoamers, oil well cement fluid loss additive, organic lignite
Light Cycle Oil (LCO) is a secondary liquid product derived from the fluid catalytic cracking (FCC) process in refineries. This process breaks down larger hydrocarbon molecules from heavy gas oils into smaller, more valuable products like gasoline and diesel. LCO typically sits between diesel and heavy gas oil in terms of boiling range and weight. Primary Characteristics: Appearance: Typically amber to dark brown liquid. Odor: Characteristic petroleum smell. Density: Intermediate, falling between lighter distillates and heavier oils. Sulfur Content: Can vary based on the feedstock and refining process, but often higher than diesel and gasoline. Applications: Blending Component: Frequently blended into diesel fuel to enhance volume, though this requires treating to meet emissions standards. Feedstock: Used in hydrocracking and other refining processes to produce more valuable products, such as gasoline or diesel. Industrial Burning: Some industries utilize LCO as a combustion fuel, though this is less common due to its higher sulfur content and potential emissions. Advantages: Versatility: Can be further processed or blended to meet various fuel product needs. Economic Value: Provides an additional stream of revenue from the FCC process, maximizing the yield of a refinery. Feedstock Potential: Offers refineries another option for producing lighter, more desirable products.
Base oils are used to manufacture products including lubricating greases, motor oil and metal processing fluids. Different products require different compositions and properties in the oil. Chemical substances additives are added to the base oil to meet the quality requirements for the end products in terms of, for example, friction and cleaning properties.
Supplier: Oil field drilling chemicals, lignite and its derivatives, sulphonated asphalts and its derivatives, calcium carbonate, drilling detergent, rig wash, spotting fluid, mud loss additives, lost circulation materials and edible oil like cold press groundnut, sunflower, sesame
Hydrax 32/46/ 68/ 100/ 150/ 220 are high quality range of oils formulated using mineral base oils with antifoam, antioxidant, anti-wear mmd antiriist additives, meeting the requirements of most hydraulic systems. APPLICATION For automotive and industrial equipment, with a wide range of viscosities to suit all practical needs requiring high performance hydraulic oil. Beneftts Excellent anti-wear protection, oxidation resistance and thermal stability. Excellent demulsibility facilitates spontaneous separation of the oil from water ingress. Low pour-point enables a wide range of application at different temperatures. The high viscosity index ensures constant flow, low friction loss and good hydraulic efficiency. The antifoam properties and ready release of entrained air prevents operational difficulties with pumps.
Rasha Motor oil 5W 40 API SN full synthetic engine oil is the ultimate in protection and performance. This premium quality engine oil is formulated a complex blend of synthetic base oils and chemical additives designed to protect the engine and enhance its performance under extreme operating conditions such as high temperature motorway driving or low temperature stop and go driving. Rasha Motor oil� 5W 40 API SN full synthetic engine oil is the ultimate in protection and performance. This premium quality engine oil is formulated a complex blend of� synthetic� base oils and chemical additives designed to protect the engine and enhance its performance under extreme operating conditions such as high temperature motorway driving or low temperature stop and go driving. � This oil is designed for use in high-speed four-stroke cycle diesel engines and Tier 4 non-road exhaust emission standards as well as for previous model year diesel engines.SAE 5 W 40 API SN RASHA Motor Oil Full synthetic engine oil, low friction type that reduces fuel consumption. Recommended for 4-stroke engines, petrol or diesel, which is used in in extreme cold and in warmer climates. This motor oil is especially effective at sustaining emission control system durability where particulate filters and other advanced after treatment systems are used. RASHA Motor oil Heavy-Duty SAE 5W-40 Full Synthetic API SN provide enhanced protection against oil oxidation, viscosity loss due to shear, and oil aeration as well as protection against catalyst poisoning, particulate filter blocking, engine wear, piston deposits, degradation of low- and high-temperature properties, and soot-related viscosity increase.
Description: Aviation Turbine Fuel (Jet A1) is the premier choice for powering commercial and military aircraft around the globe. Engineered to exacting standards and rigorously tested for quality and performance, Jet A1 is a highly refined kerosene-based fuel that meets the stringent requirements of the aviation industry. Key Features: High Purity: Jet A1 is produced through a meticulous refining process to ensure exceptional purity and cleanliness, minimizing the risk of engine deposits and fuel system corrosion. Low Freezing Point: Formulated with additives to lower the freezing point, Jet A1 remains fluid even at high altitudes and low temperatures, ensuring reliable engine operation in diverse weather conditions. Consistent Combustion: Engineered for consistent combustion characteristics, Jet A1 delivers stable engine performance and efficient fuel consumption throughout the flight envelope. Low Sulfur Content: Compliant with international aviation standards, Jet A1 contains minimal sulfur content, reducing emissions and environmental impact during flight operations. High Energy Density: With its high energy density, Jet A1 provides superior power output and range capability, allowing aircraft to travel longer distances with optimal fuel efficiency. Benefits: Safety and Reliability: Jet A1 is manufactured to the highest safety standards, ensuring reliable engine operation and minimizing the risk of fuel-related incidents or failures. Global Compatibility: Widely accepted and used by airlines, military forces, and aviation authorities worldwide, Jet A1 offers seamless compatibility with a broad range of aircraft and engine types. Environmental Responsibility: By meeting stringent emissions regulations and utilizing advanced refining techniques, Jet A1 helps mitigate the environmental impact of aviation activities, supporting sustainable air travel. Performance Optimization: Designed to meet the demanding requirements of modern aviation, Jet A1 delivers superior performance, efficiency, and endurance, enabling airlines to maximize operational efficiency and passenger comfort. Target Audience: Commercial Airlines: Essential for scheduled and charter airlines operating passenger and cargo flights, Jet A1 provides the fueling solution of choice for safe, efficient, and reliable air travel. Military Forces: Trusted by military organizations worldwide, Jet A1 fuels a wide range of military aircraft, from tactical fighters to strategic bombers, ensuring mission readiness and operational capability. General Aviation: Suitable for use in private and corporate aircraft, Jet A1 offers high-performance fueling options for recreational flying, business travel, and aerial work operations. Experience Unrivaled Performance and Reliability with Aviation Turbine Fuel (Jet A1)!
