It has outstanding features such as good sealing, strong overload capacity, lightweight and easy to installation, large output contacts capacity, etc. In view of the different sensibility of material can be done by adjustable tension of the spring, contact material part of its full stainless steel material. Resistance rotary switch in the chemical, plastic, cement, medicine, feed, food and other industries widely used.
Frequency range: 31.5Hz - 8KHz Measuring range: ï¼?28ï¼?30dB - 130dB Frequency Weighting: A/C Microphone: 1/2 inch polarization capacitance microphone Digital Display: 4digit LCD Resolution: 0.1 dB Display Update: 2 times/sec Time Weighting: FAST 125ms SLOW 1 second Measuring ranges: Range 1: ï¼?28ï¼?30dB - 70dB Range 2: 60dB - 100dB Range 3: 90dB - 130dB Accuracy: ±1.5dB (reference conditions 94dB@1kHz) Dynamic range: 40dB Overflow indicator: OVER will be displayed when over range, display OL when overflow the upper range more than 5dB. UNDER will be displayed when under range, display LO when under the lower range more than 5dB or under 28dB. MAX hold: MAX Data storage: 60000 samples Interface: USB interface Power: One 9V battery Power Life: Approximately 70 hours Operation Environment: 0 - 40°Cï¼?32 to 104°Fï¼? 10 - 75%RH Storage Environment: -10 - 50°Cï¼?14 - 122°Fï¼? 10 - 80%RH Dimensions: 185ï¼?Lï¼?*65ï¼?Wï¼?*35ï¼?Hï¼?mm Weight: 155g (including battery) Accessories: 9V battery, instruction manual, USB cable and driver disk
This series of radar level meter adopted 26G high frequency radar sensor, the maximum measurement range can reach up to 70 meters. Antenna is optimized further processing, the new fast microprocessors have higher speed and efficiency can be done signal analysis, the instrumentation can be used for reactor, solid silo and very complex measurement environment. The characteristics of 26G radar level meter: Small antenna size, easy to install; Non-contact radar, no wear, no pollution. Almost no corrosion, bubble effect; almost not affected by water vapor in the atmosphere, the temperature and pressure changes. Serious dust environment on the high level meter work has little effect. A shorter wavelength, the reflection of solid surface inclination is better. Beam angle is small, the energy is concentrated, can enhance the ability of echo and to avoid interference. The measuring range is smaller, for a measurement will yield good results. High signal-to-noise ratio, the level fluctuation state can obtain better performance. High frequency, measurement of solid and low dielectric constant of the best choice.
Sincerely thank you for buying our ultrasonic l level meter. The meter includes several proprietary technologies, is safe and clean, with high precision and long service life, stable and reliable, and convenient to install and maintain, and is applicable to various fields of acid, alkali, salt, anticorrosion, and high temperature. The meter can be connected to display meters or various DCS systems through 4~20mA or RS485 (Agreement Modbus or other custom agreements), to provide real-time level data for the operation of industrial automation. The meter is with following features: For circuit design, high-quality power modules are selected to be as power supply parts and highly stable and reliably imported devices are used as components of the meter. It can fully replace imported foreign meters of the same type. Patent sonic-wave intelligent technology software can make intelligentized echo analysis. It needs neither debugging nor other special steps. This technology has functions of dynamic thinking and dynamic analysis. Our sonic-wave intelligent patent technology greatly improves the meters precision, and the precision of level is up to 0.3%, which is enough to resist various interference waves. The meter is a non-contact one and does not directly contact , so the fault rate is low. The meter can be installed in several different ways, and the user can calibrate the meter according to the Manual. The meters all input and output lines must be with such protection functions as lightning protection and short circuit prevention.
1. Power requirement: 220vac /110vac/24vac/24vdc 2. Contact capacity: 250vac/10a 3. Switch type: spdt 4. Electrical rating: 4w 5. Vane rotation speed : 1rpm 6. Torque : 1.0kg¡ácm 7. Sensibility: 0.5g/cm3 8. working temperature: -10¡æ-80¡æ maximum temperature 400¡æ 9. Nsulation resistance: 100m 10. Dielectric strength: 1500v*1min 11. Housing rating: Ip65
Supplier: Instruments like pressure transmitter, temperature transmitter, level meter, radar level transmitter, level switch, ultrasonic flow meter, magnetic flow meter, oval gear flow meter, vortex flow meter
Services: Door to door service via fedex / ups, manufacturer, supplier
Supplier: Laser distance meter, outdoor laser level, digital laser meter, laser meters
Services:
level measure Ultrasonic rangefinder measures range: 0.6-15m Bubble level for horizontal checkout Angle measurement Adjustable built-in laser available in spot & line shape. Conversion unit among feet, inches and meter Length /area / volume measurement Data computation , storage, recall Automatically power off after 30 seconds of inactivity. Double shell blister card /piece.
Supplier: Ph meter, on-line conductivity, concentration meter, transmitter acidity, acidity meter, magnetic flap liquid level gauge, liquid level transmitter, floating ball, the ball float liquid level switch, dissolved oxygen meter
Buyer: Chemical, petroleum, pharmaceutical, paper making, food, environmental protection, agriculture
Supplier: Laser measuring tools, including laser distance meters, laser levels, laser rangefinders, laser indicators, laser measuring sensors
