4000W Pure Sine Wave Dc To Ac Power Inverter

1. Soft start and external fuses 2. 1.5 times rated power for 10s, 2 times continue for 2s 120%

1. Pure sine wave power inverters are featured as high reliability, and low failure rate, 2.Input & output fully insolated. 3.Soft start: Smooth startup of the appliances. 4.Pure sine wave output waveform: Clean power for sensitive loads. 5.Two LED indicators on the front panel shows the working and failure state. 6.Protection, inputlowvoltage protection, input overvoltage protection 7.Small and light: With the technology of CPU centralized control and SMD inside, 8.The product is very small and light. 9.Intelligent control of cooling fan: Using CPU to control the working status of the cooling fans 10.Saves the power and improves the working efficiency. 11.Low noise but high efficiency while working. 1500W Pure sine wave power inverter Max continuous power : 1500w Peak Load Power Rate:3000w No load Current: less than 0.6A Input DC voltage Range:DC10-15.5V / DC20-30V Output Voltage Range:AC120/220V±5% Output Frequency Range:50/60+/-3Hz Max Outer Temperature:less than 65c Max Power Efficiency:> 86% High Voltage Cut Off Level:>DC15.5V / >DC30V Low Voltage Alarm Level:DC10±0.3V / DC20±0.3V Overload and Short-circuit Protection:yes Input Voltage:less than DC10V / less than DC20V THD :less than 5% cooling : Fan

4000W pure sine wave car power inverter P section What is power inverter? A power inverter, or inverter, is an electronic device or circuitry that changes direct current (DC) to alternating current (AC). The input voltage, output voltage and frequency, and overall power handling depend on the design of the specific device or circuitry. The inverter does not produce any power; the power is provided by the DC source.  Features: 1. Pure sine wave output. 2. Rated power range from 300W to 4000W. 3. 100% real power. 4. Fully electric protection: Low voltage alarm & Shutdown, over voltage, earth fault,short circuit,overload,soft start, over temperature, polarity reverse. 5. Customize DC input voltage range. 6. Can match remote controller to control power-on/off, cable length for 5meters. 7. Supply OEM brand service 8. Pure sine wave output, over 90% transfer efficiency. 9. USB function 5V 2.1A. Specification details: MODEL PQ-4000P Output AC Voltage 100-120V/220-240V AC Rated Power 4000W Surge Power 8000W Waveform Pure Sine Wave USB port 5V  2.1A 5V  2.1A 5V  2.1A 5V  2.1A Input DC Voltage 12VDC 24VDC 12VDC 24VDC Voltage Range 10.5~15VDC 21~30VDC 10.5~15VDC 21~30VDC Efficiency(Typ.) >90% Remote Control Function(optional) Protection BAT.Low Alarm 10.5±0.5VDC 21±1.0VDC 10.5±0.5VDC 21±1.0VDC BAT.LOW Shutdown 10±0.5VDC 20±1.0VDC 10±0.5VDC 20±1.0VDC Over Load Shut down output voltage, restart to recover Over Voltage 15.5±0.5VDC 31±1.0VDC 15.5±0.5VDC 31±1.0VDC Over Temperature Shut down output voltage, recover automatically after temperature goes down Output Short Shut down output voltage, restart to recover DC Input Reverse Polarity By fuse Earth Fault Shut off o/p when the load has electrical leakage Soft Start Yes,3~5 Seconds Remote control(Optional) Remot controller with 5m cable Dimension 54*25.5*10.3cm(L*W*H) N.W(KG) 8.9kG G.W(KG) 10.0kG Warranty 2years

SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 5, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.

Products Features 1. Input & output fully insolated 2. High Surge: High surge current capability starts difficult loads such as TVs, camps, motors and other inductive loads 3. Soft start: Smooth start-up of the appliances. 4. Pure sine wave output waveform: Clean power for sensitive loads. 5. AC output identical to, and in some cases better than the power supplied by your utility 6. Cooling fan in the inverter is thermally activated and comes on when the inverters becomes warm, and turns off automatically after the inverter has cooled. 7. Low total harmonic distortion: Below 3% 8. Two LED indicators on the front panel shows the working and failure state. Protection Function 1. Low voltage alarm & Shutdown 2. Over-voltage protection 3. Overload protection 4. Over-temperature protection 5. Short circuit protection 6. Soft start 7. Auto. Reset after being in protected 8. Grounding protection Packaging details 1pcs/box, unit box size 43*23*14.8cm,N.W3.3kg, G.W3.9kg 4pcs/CTN, carton size 48.5*44.5*32.5cm, N.W15.0kg, G.W17.0kg