Automatic Pvb Production Line

1- Automatic Loading & Unloading Machine (SKL-2542P)
2- Glass Washing and Drying Machine
3- Transition Conveying Machine
4- Automatic Pre-position Table
5- Assembling Table
6- Automatic Suction Transfering Device
7- Motorized PVB Film Unwinding Machine
8- Transition Conveying Machine
9- Pre-laminating and Press Section
10- Transition Conveying Machine
11- Hydraulic Pressure Tilting Table For Glass Loading & Unloading SKL-2542T
12-Autoclave: 2800*6000mm

High speed, high-capacity bench top, Medical/ Laboratory Centrifuge Machine, Microprocessor based
 Heavy duty C.R.C. construction finished with powder coating.
Noiseless Operation.
Programmable RPM selection 500 to 6000 in intervals of 100 rpm.
Digital timer 0-120 minutes.
The machine is fitted with a well-balanced brushless motor with an electronic drive.
The Electronic lid lock does not allow the lid to be opened when the machine is running.
The motor is fitted with rpm sensor to monitor the rpm of the machine. The controller monitors the rpm of the machine and does not allow the motor to overspeed.
The Machine has safety features for the detection of Imbalance and stops automatically.
Warranty 3 years from the date of installation.
4 lines, 20 characters Jumbo LCD Display for set time, run time, set and run RPM, RCF.
 50 programs can be stored in memory.
Programmable Acceleration Time: 40-200 Sec and Deceleration Time: 40-200 Sec with advanced Coast Feature condition and opens automatically after centrifuge rotor stops.
 Dynamic brake (automatic) .
 Fast spin option.
 Delta Industrial Automation VFD and SMPS (Make in India).
The machine can run fixed angle rotors, swingout rotors, well plate rotors & microtube rotors.
Stainless Steel 304-grade rust-free centrifugal bowl for extra protection and easy cleanin User-friendly control panel. The last test parameter recalls and displays automatically on LCD after resuming of Power

High speed, high-capacity bench top, Medical/ Laboratory Centrifuge Machine, Microprocessor based

Heavy duty C.R.C. construction finished with powder coating.

Noiseless Operation.
Programmable RPM selection 500 to 6000 in intervals of 100 rpm.
Digital timer 0-120 minutes.
The machine is fitted with a well-balanced brushless motor with an electronic drive.
The Electronic lid lock does not allow the lid to be opened when the machine is running.
The motor is fitted with rpm sensor to monitor the rpm of the machine. The controller monitors the rpm of the machine and does not allow the motor to overspeed.
The Machine has safety features for the detection of Imbalance and stops automatically.
Warranty 3 years from the date of installation.
4 lines, 20 characters Jumbo LCD Display for set time, run time, set and run RPM, RCF.
50 programs can be stored in memory.
Programmable Acceleration Time: 40-200 Sec and Deceleration Time: 40-200 Sec with advanced Coast Feature condition and opens automatically after centrifuge rotor stops.
Dynamic brake (automatic) .
Fast spin option.
Delta Industrial Automation VFD and SMPS (Make in India).
The machine can run fixed angle rotors, swingout rotors, well plate rotors & microtube rotors.
Stainless Steel 304-grade rust-free centrifugal bowl for extra protection and easy cleanin
User-friendly control panel.

Automatic insulating glass produce line

Main functions:
1. This machine has the self- diagnosis function, which is easy for check the error.
2. The machine has automatic and the manual two operating modes. They are more convenient and succinct;
3. It adopts the multistage frequency conversion control and multi-speed revolution optimization function and it can realize each kind of size glass movement automatically.
4. Every transportation partial adopts stops the cushion function, which can avoid phenomenon which appears the glass and the equipment localization occurs dashes. And effectively reduces the glass to transport a turn of attrition.
5. Adopt the electricity saving pattern, when the conveyer puts in the glass which can automatic start. It doesnf+t have the glass time delay automatic shut-off, saves the power consumption.
6. Air blowers adopts graduation time delay starter, effectively avoids the initial firing current oversized phenomenon.
7. Cleaning dryer and the water tank was made by stainless steel processing manufacture, transmits the roller for to bear the acid and alkali rubber roller, according to the glass thickness transmission roller spacing may the automatic control.
8. Inspections transmissions and the aluminum frame assembly machine adopt the double fast transmission, highly effective energy conservation May realize automatic processing to the ultra long glass, three glass and the size piece glass. (This item for specially request)
9. The press panel board of panel pressure board adopts to imported osculum, the press system and panel press system are controlled by the Servo motor system·+screw convey·¼, which guarantee the two pieces glass press together safely and steadily and the processing accuracy.


Dimension: 15900*2100*2960mm
Weight·ª4000kg

Our CE- EUROPE QUALITY Glass Cutting Line- SKCL-3725A is including 3 parts,
1- Glass Loading Machine - SKLM-3725A
2- CNC Cutting Table with Belt-transfer - SKC-3725A
3- Breaking Machine - SKB-4030C


1)-Specification of Automatic Glass Loading Machine:
Type:SKLM-3725A
Working mode: the loading is driven by the gear-motor, and run on the rail
Machine size: 4700 x 3800 x 900mm
Max glass weight: 500kg
Max glass size: 3660mm�2440mm
Working circle time 1ST : station>35sec
Working station:1working stations in one side
Required power:10KW/380V
Required pressure:0.6MPa,dry and instant

SANKEN sincerely wishes to offer you the best quality glass cutting line with the best economical price. And you are most welcome to China for visiting our factory!

Laminated glass is made of two or more pieces of glass panes, which are laminated with PVB interlayer under high temperature and high pressure. Laminated glass production line is necessary equipment for construction glass, decoration glass, wind-screening glass and bulletproof glass.

The whole full automatic laminated glass production line, we often call it lamination line, laminated glass line. It consists of automatic loading machine, washing and drying machine, Transition conveyor (¢ñ.¢ò.¢ó) Automatic positioning station£¬ Automatic sucker transferring unit, Assembling table, PVB film unwinding machine, Heating and pre-pressing machine, Unloading tilting table and Autoclave. There are two kinds of heaters: Ordinary quartz heater and IR heater. The whole line is PLC controlled with high efficiency, safety, reliability, and easy operation. It has serious technical features as following:

1. The solid and efficient intelligent control system: the whole line is centralized control by industrial computer assisted in PLC and monitor display/operation, Conveyors of the whole line are centrally controlled.

2. Designing and producing focus on safety regulations and energy saving programs. We can satisfy any kinds of requirement of consumer to produce the machine what the want.

3. Software programs by ourselves can satisfy any range of glass types and sizes for processing. The glass sheets are guaranteed to have a smooth and coherence without any crash and scratch in fast or slow speeding delivery.

4. Automatic loading Machine has different demand such as single/double side(s) and single/double/multi working station(s) to load the glass sheets into the working line.

5. Glass Washing & Drying Machine focuses on appropriate design and convenient operation. Top section including top brushes, pressing rollers and air knives can be adjusted automatically or manually, the maximum of distance can reach 400mm.

6. Automatic Positioning Station in cleaning room realizes the glass accurate positioning. The conveying roller works the crosswise positioning and the synchronous belt works the lengthwise one. After the accurate positioning the glass sheet will be taken by Overhead Transferring Unit to assembling station.

7. Overhead Transferring Unit in cleaning room can be set travel distance is based the glass size. It ensures the assembling accuracy within ¡À0.5mm.

8. Extension Assembling Table can extend the working station according to glass size. PVB Film Unwinding Machine can wind /unwind the film automatically. The maximum capacity is to load 5 rolls.

9. The pre-press rolling machine has high value design and factions for pre-press rolling glass bond. The heating zones in it are fitted with IR emitters which can be adjusted by controlled silicon to realize no contact rapid alternation. Combined with PWM system to regulate the IR emitter the rays will be perfectly absorbed by the film. The main heating zones are designed to have air cycle system to realize uniform temperature distribution so that to be adapted perfectly to the different types of glass. The pressing roller I and II can automatically (option) adjust the gap to meet the glass thickness. The top structure with cylinder supplies upper press. Well balanced heating and regular air evacuation are guaranteed for good pressing consideration. The structure is reasonable for min movement after pressing.

10. Tilting Table for Unloading makes the glass sheet from conveyor to approx. vertical situation that is easy for clamp lifting.

11. Autoclave is controlled by industrial computer assisted with digital control card and digital display to realize real-time control. It ensures safety, convenient operation and faster cooling per circle that outside wire connecting and know-how circulation, water cooling system.

Semi-automatic laminated glass production line, we often call it lamination line, laminated glass line. This line includes different equipment such as washing machine, PVB unwinding machine, laminating positioning and transmission machine, movable scissor sucking hanger, pre-laminating and pressing section and autoclave. There are two kinds of heaters: Ordinary quartz heater and IR heater. The whole line is PLC controlled with high efficiency, safety, reliability, and easy operation.
£¨1£©The whole line is centralized control by PLC .
£¨2£©Washing and drying machine is the core equipment of the whole line.
The upper Rubber rollers, brush rollers and air-knives etc. can be adjusted on the panel and digital displayed according to the thickness of glass to be processed. The upper section of the machines can be elevated by 400mm for convenience of cleaning and repairing. The Brush Rollers are driven by motors with upper and lower separately.
Allocation of one soft brush and two hard brushes (can be lifted when needed) in the upper washing sector is designed for washing hard low-e glass, coated glass without damaging the coating.
Three Stainless steel air-knives, the blower equipped with muffle cotton and air feeding filter screen pack ensures plenty of air, less noise and the good drying effect.
£¨3£©In the laminating room the laminating table, brace of the up-down device, positioning cylinder, PVB film unwinding machine, movable scissor cup suction hunger, convenient for processing of large and big glasses.
Every single processing glass can be conveyed in a higher speed to enter into the Pre-laminating and pressing section and regulated automatically the speed to running at the same speed with the Pre-laminating and pressing section which can make room for the next pieces of glass which improves the running efficiency of the Line.
£¨4£©Pre-laminating and pressing section has reasonable structure.
The integrity is controlled in laminating room with its stable running function.
Speed regulation is frequency variable.
Space/distance between two great squeezing rollers is set by industrial computer assisted by PLC with monitor displayed. The great squeezing rollers are driven by reducer separately.
The heating elements adopt Quartz -Heaters. Temperature is zone control.
£¨5£©Autoclave is a specialized machine for production of laminated, anti-bullet and anti-bombing glass. This machine will melt the PVB film and combined two layers or more than two layers glass by high temperature and high pressure.
Technical parameters
1. Max. Processing glass size:6000mm2500mm
2. Min. Processing glass size:400mm 400mm
3. Processing laminated glass thickness: 6-80mm
4. Total length: 26800mm
5. Power source: AC380V 50 HZ
6. Total power:138.63 KW(without autoclave power)

1641B BURETTE with rubber tubing connection, glass bead and glass tip , B grade

1641A BURETTE with rubber tubing connection, glass bead and glass tip, A grade

1642B BURETTE with straight stopcock, B grade

1642A BURETTE with straight stopcock, A grade
8642A BURETTE with PTFE stopcock, A grade
8642AB BURETTE with PTFE stopcock, A grade, amber glass
1644B BURETTE with blue line on milk white back, rubber tubing connection, glass bead and glass tip, B grade

1644A BURETTE with blue line on milk white back, rubber tubing connection, glass bead and glass tip, A grade

1645B BURETTE with blue line on milk white back, straight stopcock,Schellbach,B grade

1645A BURETTE with blue line on milk white back, straight stopcock,Schellbach, A grade

1647B BURETTE , with rubber tubing connection, glass bead and glass tip,B grade

1647A BURETTE , with rubber tubing connection, glass bead and glass tip, A grade

1648B BURETTE amber glass,with straight stopcock, B grade

1648A BURETTE amber glass,with straight stopcock, A grade

1651 AUTOMATIC BURETTE Pellet with reservoir, rubber stopper and pressure bulb

1652 AUTOMATIC BURETTE Squuibb with ground - in glass stopper and pressure bulb

1653 AUTOMATIC BURETTE Squuibb with reservoir, ground - in glass stopper and pressure bulb

1654 AUTOMATIC BURETTE amber glass with ground - in glass stopper and pressure bulb

1655 AUTOMATIC BURETTE with ground - in glass reservoir and pressure bulb

1657 AUTOMATIC BURETTE blue line on milk white back with ground - in glass stopper and pressure bulb

1658 AUTOMATIC BURETTE amber glass with ground - in glass stopper and pressure bulb

1661B MICRO BURETTE with wooden base

1661A MICRO BURETTE with wooden base

1663B MICRO BURETTE with side filling tube

1663A MICRO BURETTE with side filling tube, Fisher

High quality with very competitive prices, welcome for the inquiry.

Max glass size:1800*2500mm
Min glass size:300*500mm
Glass thickness:3-12mm
Brushes: 3pairs
Low-e glass: yes
Can make three pcs insulating glass
Voltage: 3p380v 50hz


Dimension: 15000*2500*2900mm
Weight: 2500kg