Cas no.: 9003-04-7
Formula: (c3h3nao2)n
Density: 1.32 g/ml at 25 °c
that normally happens to cmc and sodium alginate. The viscidity is about 15~20 times higher than cmc and sodium alginate. It shows high alkali-resistant, minor change in viscosity after longtime storage, and not easily decaying.
1¡ê©packed in net 25kg polywoven bag lined with well-sealed pe inner bags. Pretected from moisture and avoid contact with acid, alkaline and metal ions.
2) store in a dry, closed container and protected from rain.
Sodium polyacrylate is a white powder. Odorless and tasteless. Very hygroscopic. Polymer compounds with hydrophilic and hydrophobic groups. Slowly dissolves in water to form a very viscous transparent liquid. The viscosity of its 0.5% solution is about Paâ?¢s. The viscosity is not caused by water absorption and swelling (such as CMC, sodium alginate), but due to the many anionic groups in the molecule. The ionic phenomenon causes the molecular chain to grow and the viscosity increases to form a highly viscous solution. Its viscosity is about 15-20 times that of CMC and sodium alginate. Heat treatment, neutral salts, and organic acids have little effect on its viscosity, but when it is alkaline, the viscosity increases. Insoluble in organic solvents such as ethanol. Strong heat to 300 degrees does not decompose. The long-term viscosity changes very little, and it is not easy to decay. Because it is an electrolyte, it is susceptible to the influence of acid and metal ions, and the viscosity is reduced.
Sodium polyacrylate is a new kind of water-soluble macromolecule compound, which is odorless, tasteless, high-purified, extremely stable and non-corruptive. It is not only with strong thickening, emulsifying, shaping, puffing, stabilizing, water-retention and other functions, but also has the high viscosity of 15 to20 times than that of the CMC or sodium alginate. To reduce the production costs, improve food grade, it is a non-dangerous goods and is harmless to human body. Application Examples of Sodium Polyacrylate 1.Food Manufacturing 1)Flour Products 2) Sheet Jelly Category 3) Meatballs, Fish Balls,Ham 4) Fish Meat Products, Canned Food 5) Artificial Meat 6) Cold Drinks 7) Sauce, Jam, Cream 8) Frozen Food, Aquatic Product's "glaze"(Surface Jellies Agent) 2. Toothpaste Manufacturing 3 Tobacco Industry 4. Pharmaceutical Industry
Product Name: Sodium Polyacrylate Product Description: "This product is one of Sebchem Key products Some of our direct/ Indirect clients are ARAMCO, ADNOC, SCHLUMBERGER, BAKER HUGHES, CLARIANT, CHAMPION, GE, SUEZ, METITO, ECOLAB, MAPEI, SIKA, ARAMCO REFINERIES, SCOTT BADER, SYNTHOMER, IFFCO. Sebchem providing its chemicals to our global clients in the Oil & Gas Upstream Oil & Gas Downstream, Petrochemicals, Industrial, Water Treatment, Construction, Detergent, Coating & Resin, Agro, Textile, Food. We supply chemicals IBCs, Drums, ISO Tanks, Bags, and up to Bulk Vessels" Price of product ( USD price or FOB price): USD Product origin: Multiple Key Specifications/Special Features: "This is one of Key products of Sebchem given to Sebchem clinets across the World. Please contact our sales team or via our website for getting TDS, SDS, COA "
Polyacrylic Acid Sodium (PAAS) CAS 9003-04-7 Properties: PAAS is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. PAAS can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. PAAS is used as scale inhibition and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Notes: Solid content 40%, 45% and 50% are also available Usage: PAAS can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 2-15mg/L is preferred. When used as dispersant, the dosage should be determined by experiment. Package and Storage: 25kg or 200kg in plastic barrel. Storage for ten months in room shady and dry place.
CAS 9003-04-7 Properties: PAAS(Polyacrylic Acid Sodium) is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. PAAS(Polyacrylic Acid Sodium) can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. PAAS(Polyacrylic Acid Sodium) is used as scale inhibition and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Specification: Appearance Colorless or light yellow transparent liquid Solid content % 30 min Free monomer (CH2=CH-COOH) % 0.5 max Density (20 centigrade)g/cm3 1.15 min pH(1% solution) 6.0~8.0 Notes: Solid content 40%, 45% and 50% are also available. Usage: PAAS(Polyacrylic Acid Sodium) can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 2-15mg/L is preferred. When used as dispersant, the dosage should be determined by experiment. Package and Storage: 25kg or 200kg in plastic barrel. Storage for ten months in room shady and dry place.
PAAS can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. PAAS is used as scale inhibition and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Specification: Appearance: colorless or light yellow transparent liquid Solid content : 30 % min Free monomer (CH2=CH-COOH): 0.5% max Density (20 centigrade): 1.15 g/cm3 min pH(1% solution): 6.0~8.0 Notes: Solid content 40%, 45% and 50% are also available Usage: PAAS can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 2-15mg/L is preferred. When used as dispersant, the dosage should be determined by experiment. 25kg or 200kg in plastic barrel. Storage for ten months in room shady and dry place.
Properties: PAAS is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. PAAS can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. PAAS is used as scale inhibition and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Specification: items& index Appearance Colorless or light yellow transparent liquid Solid content %: 30 min Free monomer (CH2=CH-COOH) %: 0.5 max Density (20íµ)g/cm3: 1.15 min pH(1% solution): 6.0~8.0 Notes: Solid content 40%, 45% and 50% are also available Usage: PAAS can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 2-15mg/L is preferred. When used as dispersant, the dosage should be determined by experiment. 25kg or 200kg in plastic barrel
Appearance: Colorless or light yellow transparent liquid Solid content % :30 min Free monomer (CH2=CH-COOH) % :0.5 max Density (20íµ)g/cm3 :1.15 min pH(1% solution) :6.0~8.0 25kg or 200kg in plastic barrel
Supplier: Sodium polyacrylate and potassium polyacrylate, potassium polyacrylate, sodium polyacrylate
