6-S Gold Concentrate Shaker Table For Gold Separ

Mitsubishi MG400 Motor Grader Specifications
Main Specifications
Blade Width: 3710mm (standard blade width)
Steering System: ATC
Weight & Loads
Operating Weight: 13,100kg
Front Axle Load: 3,700kg
Rear Axle Load: 9,400kg
Dimensions
Overall Length: 8490mm
Overall Width: 2400mm
Overall Height: 3360mm
Wheelbase: 5910mm
Tandem Wheelbase: 1520mm
Ground Clearance: 355mm
Engine
Manufacturer: MTB
Model: 6D22C
Rated Output: 110.3kW (150 PS) @ 2000rpm
Cylinders: 6
Bore x Stroke: 130 x 140mm
Displacement: 11.2liters
Hydraulic System
Output Pressure: 17.2MPa
Oil Flow Rate: 128L/min
Transmission
Type: DPS
Speeds: 6 forward / 6 reverse
Max Travel Speed: 45.0km/h (forward), 45.4km/h (reverse)
Tires
Front: 13.00-24, 14-ply
Rear: 13.00-24, 14-ply
Performance & Other Features
Operation Type: Hydraulic (HYD)
Scarifying Width: 1225mm
Minimum Turning Radius: 6900mm
Articulate Angle: 25
Fuel Tank Capacity: 230L
Optional Equipment: BL(4000), S/C

1 x Used Hitachi ZX130LCN-6 Excavator.

Year of Manufacture: 2018.

Specification: 14,400kg, Hydraulic Quick Coupler, Auxiliary Line, Boom & Dipper Check Valves, A/C, Heated Seat, Good Undercarriage Approximately 70% good. EPA & CE Machine.

Working Hours: 5,900.

Price: Euro 38,500 GBP ex works United Kingdom.

Machine Location: West Yorkshire, United Kingdom



Origin: The Netherlands, European Union.

Minimum Order: 1 Unit Available.

Shipping Terms: Ex Works United Kingdom.

Price is Ex Works United Kingdom. We are happy to provide transportation & Shipping Prices should you require this.

Payment Terms: 100% TT Before Shipping

Description

The centrifugal concentrator, a kind of gravity separation equipment, is suitable for the separation of heavy medium minerals that have enough specific gravity differences.

STLB concentrator is kind centrifugal concentration equipment. It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation. It is also used to recover gold from the old tailings.

Since 1985, three models have been developed. Application shows that the recovery can be as high as 99%, especially for the case in recovering the natural gold in lode ore with 65% of the ore having a milling size of 0.074mm, the recovery for the natural gold is expected up to 98%. For those natural gold of 0.004mm in particle size, the recovery is 97%. The cleaning up cycle is 1~4 hours. And the upgrade ratio is up to 1,000 times.

Working Principle

Water jacket centrifugal concentrator is forced by centrifugal force increases mineral centrifugal acceleration, the minerals in the centrifuge spins a few times to get the equivalent in gravity state, then the proportion of mineral difference is magnified several times, Together with recoil mineral water to prevent compaction, thereby fine, mineral beneficiation achieve good results.

Main models:

D20 with 1-2t/h capacity
D30 with 2-7t/h capacity
D60 with 15-30t/h capacity
D80 with 30-70t/h capacity
D100 with 60-100t/h capacity

Floating shaker table in pioneers used primarily for sorting coarse grain size of the tungsten-containing rock and placer tin or nonferrous metal sulfide ores containing sulphides of tin concentrates or coarse scheelite - wolframite - cassiterite mixed concentrate ore particle size is usually in the range of 0.2 ~ 3mm, individual cases can reach 6mm.





These sands crude density difference or need to concentrate minerals with similar specific gravity, then the normal gravity separation method can not achieve effective separation; flotation separation by single flotation concentration, because the particle size is too large, and unable to obtain satisfactory technical indicators by only froth flotation. At this time, we introduce our TF-4500*1850 floating shaking table in pion eers with complete wooden riffle deck which can be coated with rubber.

Gold concentrator.

Stock No - 2502050903AMCAPS
Reg Year/Month - 2012
Mileage - 3,460km
Engine Size -
Transmission - MT
Drive Type -
Steering - Right Hand
Engine Model -
Model Code - V4-6
Chassis No - 61***
Fuel - Diesel
Color - Red
Seats - 1
Maximum Carry -
Status - In-Stock

Stock No - 2502120906AMCAPS
Reg Year/Month - 2006
Mileage - 8,426km
Engine Size -
Transmission - MT
Drive Type -
Steering - Right Hand
Engine Model -
Model Code - GD405A-3
Chassis No - GD405A-3-6***
Fuel - Diesel
Color - Yellow
Seats -
Maximum Carry -
Status - In-Stock

OPTIONS:
AC Front

Stock No - 2502261002APS
Reg Year/Month - 2005
Mileage - 2,314km
Engine Size -
Transmission - MT
Drive Type -
Steering - Right Hand
Engine Model -
Model Code - PC50MR-2
Chassis No - PC50MR-2-6***
Fuel - Diesel
Color - Yellow
Seats -
Maximum Carry -
Status - In-Stock

Gold centrifugal concentrator is a new type of gravity mineral processing device., it can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, but also used to recover gold from the old tailings. It is widely applied on recovering free gold in all particle size ranges, especially for recovery of fine gold which is lost during the operation of the gravitational concentrators (sluice boxes and jigs).
Test showed that the machine is very effective for separating monomer gold in vein gold deposits as replacement of mercury plate. The recovery can be as high as 99%, the cleaning up cycle is 1~4 hours, and the upgrade ratio is up to 1, 000 times. Especially for the case in recovering the natural gold in lode ore with 65% of the ore having a milling size of ¡ª0. 074mm, the recovery for the natural gold is expected up to 98%. For those natural gold of 0.004mm in particle size, the recovery is 97%
The gold centrifugal concentrator can treat particle sizes from below 10 microns up to a maximum of 6mm and is most commonly used for recovery in gold and platinum. Other recovery uses include mercury, palladium, tantalum, copper, silver and diamond indicator minerals.
Structure and working principle
The machine is operated by motor via belt driving draft to make liner rotate at a high speed. Slurries are delivered to liner through feed pipe and are subject to stronger process of separation under the action of centrifugal force. Heavy mineral remains in the lattice chute of liner and light mineral is drained via tailing chute. Concentrate is discharged through outlet after one shift operation and shutdown of the machine.
Technical parameters
Model
Power
Capacity
Slurry water
Jet water
Concentrate


Kw
T/h
L/min
L/min
Kg/shift

Stlb20
0.75
0.5~1.0
16
30
1~2

Stlb30
2.2
2~3
120
80
8~15

Stlb60
4.0
10~12
400
250
20.