Shctr-j-610
Refer to :yamha 6g1-44352-00
6 blands
2t=6-8hp
18-3066
By plastic bags
Shctr-J-121 Refer to :yamaha 6e5-44352-03 6 blands 2t=115-300hp 4t=115-150-200-225-250hp 18-3071 By plastic bag
Shctr-j-162 Refer to :yamaha6f5-44352-01 676-44352-00 6 blands 2t=25-40hp 4t=4hp 18-3088 By plastic bags
The basic component of a rice rubber polisher is a set of rectangular rods, which polish rice grains effectively and affordably. These polishers make grains of rice that are durable and don't break easily, as well as a brilliant and glittering appearance. Rice rubber polishers come in a variety of grades, depending on which one best suits the production and processing methods. It will give you top-notch outcomes and prevents the grain from breaking down quickly. Additionally, it aids in the optimization of the costs to production ratios. The quality of the grains can be improved and maximised with the aid of a suitable rubber polisher. It facilitates numerous procedures and polishes rice. SIZES Our group manufactures several types of rubber polishers for polishing rice, and they are typically composed of natural rubber. 16 1 18 1 1 18 1 2 18 2 2 20 2 2 22 2 2 24 2 2
Shctr-j-1611 Refer to : 63v-44352 6 blands 2t=4-5hp 4t=4hp 18-3073 By plastic bags
Description: Polybutadiene Rubber (PBR) is produced by solution polymerization process, has very high elasticity and degree of resistance to dynamic stress, and retains these properties even at extremely low temperatures. Blending natural rubber or styrene-butadiene rubber with PBR improves the abrasion resistance, crack resistance and heat build-up under dynamic load. Packing: 1 Bale, wrapped in polyethylene film = 35 kg 1 Pallet (36 Bales) = 1.26 MT ±18 kg 1 Container (19 Pallets), 40-ft FCL = 23.94 MT
Supplier: Rubber impellers suit for inboards, outboards & pumps
Intensive mixer in China 1. The mixing chamber is forged of the jacket type providing good cooling or heating effect. Its working face is built up by welding with sintered carbide to resist abrasion and corrosion. 2. The rotor shaft is bored and welded with the banbury rotor, forming the integrated construction. Water or steam can be led through the cavity to cool or heat it. The rotor wings are built up by welding with sintered carbide on the top and two side surfaces to resist abrasion and corrosion. 3. The hydraulic sealing that is pressurized externally is used for the end faces of the rotor. The pressure is adjustable and the sealing effect is good. 4. Operation of the discharge door is driven by the double-rack tilting cylinder with the crank retaining mechanism so that installation is easy, the start pressure low, the mechanical efficiency high, and the operation safe and reliable. The discharge door is of the drillhole cooled type and the working surface is built up by welding with sintered carbide. 5. The advanced plc control technology and the intelligent display terminal are used for the control system. It provides the functions of intelligent operations and information indication in chinese characters, such as setting the control parameters to the userí»s requirement, giving appropriate prompts about the operation steps, dynamically displaying the mixing process parameters and detecting faults and giving alarms, which improves the reliability of the control system.
The machine is applicable for plasticating and mixing rubber and plastics. Structural features: The internal mixers of this adopt elliptical tangential rotors. The wings and working surfaces of the rotors, the internal surfaces of the mixing chamber, and the working surfaces of the pressing ram device and the discharging device are all coated on with wearable hard alloy by built-up welding method, which are durable and corrosion proof and have a long service life. The rotors, the mixing chamber and the discharging door are all structured with circulating channels to realize the circulation of heat transmission mediums. According to different processing requirements, the mixing materials may be heated by hot steam or cooled by cold water. The mixing chamber is a combined configuration, which is convenient for assembling, disassembling and maintaining. The drop-door discharge device is driven by two reciprocating oil cylinder which directly pull the locking plate to lock the discharge door. The device provides fast discharging and reliable airproof. The rotors are supported by rolling bearings, which are easy to maitain and have a long service life. The transmission system adopts a hard facing gear reducer, which has a compacted structure with higher transmission effciency, lower noise and longer service life. The pressing ram device may be driven by pneumatic cylinder or oil cylinder to press onto the mixing materials to force them equally mixed so as to increase productive effciency. Mated with the electric controller, the pressing ram device can automatically add pressure, release pressure or just keep floating. Both manual and automatic modes are arranged to operate plc electric system. It is easy to exchange the modes and reliable to operate the controller.