Structure characteristicsac30 modulus socket has good contact reliability, it is suitable for the rail installation and can be used to match other modulus terminals.
Main technical parameters1. Rated voltage/currentone phase 220v/6a10a16a (divided into with safety door and without safety door) three-phase 380v/16a252. Operation life:5000/times.
Product details
Supplier: Miniature circuit breaker, wall switch & socket, modulus terminal distribution box, intelligent household multimedia system, surge protective device, automatic switching device, universal circuit breaker, circuit breaker, cable
Supplier: Miniature circuit breaker, wall switch & socket, modulus terminal distribution box, intelligent household multimedia system, surge protective device, automatic switching device, universal circuit breaker, moulded case circuit breaker
HP Size and Tolerance Diameter (mm) Length (mm) Nominal diameter Actual diameter Nominal length Tolerance Short feet length mm inch max min mm mm max min 200 8 209 203 1600/1800/ 2000/2200/ 2400/2700 ±100 -100 -275 250 10 258 252 300 12 307 302 350 14 357 352 400 16 409 403 450 18 460 454 500 20 511 505 550 22 556 553 600 24 613 607 Physical and Chemical Index of HP Items unit Diameter: 250-600mm Standard Test data Electrode Nipple Electrode Nipple Electrical resistance μΩm 6.5-7.5 6.0 6.0-7.0 5.5 Flexure strength Mpa 9.8-10.5 14 12-15 15-18 Modulus of elasticity GPa 12 16 12 14 Ash content % 0.2 0.2 0.2 0.2 Apparent density g/cm3 1.6 1.7 1.68-1.73 1.75 Factor of expansion(100-600) x10-6/ 2.4 2.2 2.2 2.0 Operating instruction 1. Use special hoist tools to hoist graphite electrode. It is strictly forbad to prize electrode ends up with crowbar. It must be handled with great care during transport to avoid being struck. 2. Graphite electrode must be kept away from being moistened or wetted by rain, snow and water, and must be kept dry. 3. Carefully checking before making connection, make sure that socket and nipple thread is not damaged, nipple pitch plug is in. 4. Blow the nipple and socket threads with compressed air. 5. It must be dried in the furnace before use, the drying temperature in the furnace should be less than 150,the drying period should be more 30 hours 6. Graphite electrode must be connected and contacted closely and straightly.Use moment spanner for connecting electrode with suitable force. Mustnt decline. 7. The holding device must hold the electrode tightly, good contact and no arc. 8. To avoid the electrode breakage, put the large materials in lower part and small materials in the upper part. Insulating materials should not be put into the furnace. The working current of electrode must be conformity with the allowable current of electrode in the instructions.