Product: HDPE Granules
Specification:
Melt Mass-Flow Rate(MFR) g/10min---------0.06-0.08
Density g/cm3-------------------------------------------------------0.948-0.925
Tensile Stress at Yield kg/cm2--------------------------240Min
Tensile Stress at Break kg/cm2-------------------------370Min
Elongation at Break % --------------------------480Min
Hardness-------------------------------------------60Min
Melting point-----------------------------------125-135
Packing: 25kgs pp bag, 16 MT/20FCL.
Item Test Condition Test Method Value Unit Density ISO 1183 0.950~0.955 g/cm MFR 190 C/2.16kg ISO 1133 1.7~2.5 g/10min Tensile strength at yield ISO 527-2 24 MPa Elongation at break ISO 527-2 >600 %
Specification: Virgin. Type: Film grade, Injection molding grade, Blowing molding grade, extrusion grade,
Item Test Condition Test Method Value Unit MFR 190C/2.16kg ASTM D-1238 20 g/10min Density --- ASTM D-792 0.954 g/cm3 Tensile strength at yiled --- ASTM D-638 28 MPa Elongation at break --- ASTM D-638 250 % Impact tensile strength --- ASTM D-1822 42 kJ/m2 ESCR ASTM D-1693 3 --- VACIT --- ASTM D-1525 127 C
Item Test Condition Test Method Value Unit Density ISO 1183 0.950~0.955 g/cm MFR 190 C/2.16kg ISO 1133 1.7~2.5 g/10min Tensile strength at yield ISO 527-2 24 MPa Elongation at break ISO 527-2 >600 %
Specifications: 1. HDPE 2. Transparent granule 3. We have all grades - Injection, Film and Moulding, all Density and Melt Flow Rate.
HDPE is a white powder or granular product. Non-toxic, tasteless, crystallinity was 80% ~ 90%, softening point is 125 l ~ 35 â??, using temperature is 100 â??; Hardness, tensile strength and creep are better than low density polyethylene. Good wear resistance, electrical insulation, toughness and cold resistance; Good chemical stability, at room temperature, insoluble in any organic solvents, acid, alkali and various kinds of salt corrosion resistance; The film has little permeability to water vapor and air and low water absorption. Aging resistance, environmental stress cracking resistance is better than low density polyethylene, especially hot oxidation will make its performance degradation, so must be added in the resin antioxidant and uv absorber, etc to improve the deficiency of. The heat deformation temperature of high density polyethylene film is low under stress. HDPE Character : HDPE has the very good performance, especially the insulation dielectric strength is high, so that it is very suitable for wire and cable. Medium to high molecular weight grades has excellent impact resistance, even at room temperature under 40 flow temperature.
We can readily supply a wide range of products to your company. We are specialized in the supply of water treatment chemicals, inorganic chemicals, food and beverage chemicals, rubber and plastic chemicals, food additives, PU foam materials, ore and metals, mining chemicals, fertilizers We can readily supply retail quantities and also in bulk Malic Acid, Fumaric Acid, Tartaric Acid, Lactic Acid, Sodium Lactate, Citric Acid, TriSodium Citrate Succinic Acid, Aluminum Powder, Urea 46% Fertilizer, Xanthan Gum, Sodium Nitrate, Trichloroisocyanuric Acid, Chlorine Tablets, Ammonium Chloride, Caustic Soda, Sodium Lauryl Sulfate, Sorbic Acid, Soda Ash, Phosphoric Acid, Calcium Hydroxide, Propylene Glycol, Potassium Sorbate, Potassium Nitrate, Magnesium Oxide, Isopropyl Alcohol, Glycolic Acid, Glycerin, Acetone, Zinc Chloride, , Sodium Tripolyphosphate, Sodium Thiosulfate, Sodium Silicate, Potassium Chloride, Potassium Carbonate, Magnesium Chloride, Isocyanuric Acid, Hydrogen Peroxide, Copper Sulfate, Copper Oxide, Calcium Chloride, Calcium Carbonate, Boric Acid, Borax, Acetic Acid, Lithium Carbonate,Sodium Acid Pyrophosphate (sapp),sodium Tripolyphosphate (stpp),tripotassium Phosphate (tkp),trisodium Phosphate (tsp),Tetrasodium Pyrophosphate (tspp), Sodium Hexametaphosphate (shmp) Dipotassium Phosphate (dkp)Chemicals, Aluminum Powder, Carbon Black, Urea 46% Fertilizer, Xanthan Gum, Sodium Nitrate, Trichloroisocyanuric Acid, 3" Pool Chlorinating Tablets, Ammonium Chloride, Caustic Soda, Sodium Lauryl Sulfate, Sorbic Acid, Sodium Chloride, Sodium Carbonate (soda Ash), Phosphoric Acid, Calcium Hydroxide, Ascorbic Acid, Propylene Glyco, Potassium Sorbate, Potassium Nitrate, Magnesium Oxide, Lactic Acid, Isopropyl Alcohol, Glycolic Acid, Glycerin, Acetone, Zinc Chloride, Sodium Tripolyphosphate, Sodium Thiosulfate , Sodium Thiosulfate Anhydrous, Sodium Silicate, Sodium Permanganate, Potassium Chloride, Potassium Carbonate, Magnesium Chloride, Isocyanuric Acid, Hydrogen Peroxide, Copper Sulfate, Copper Oxide, Citric Acid, Calcium Chloride, Calcium Carbonate, Boric Acid, Borax, Acetic Acid, Lithium Carbonate, Lithopone, Construction Chemicals, Specialty Chemicals, Industrial Chemicals, Lithium Hydroxide, Lithium Carbonate, Ethanol, Base Oil, Gamma Butyrolactone (gbl) Trichloroisocyanuric acid, sodium dichloroisocyanurate, cyanuric acid, disinfectant tablet, effervescent chlorine tablet, bcdmh tablet, algaecide, aluminium sulfate, degtergent powder, washing powder, fibre glass, caustic soda, benzyl chloride, chlorinated hdpe granules, pp granules, ldge granules
Material: High Density Polyethylene. Origin: Saudi Arabia. Source: Petrochemical Industry. Grade: Injection Molding. Color: Natural. Packing: 750-850 KG Jumo Bags. Loading Port: Jeddah Saudi Arabia. Payment Terms: TT basis for less than 100 TONS order. LC basis for minimum 100 Tons order. Please contact for price and more details.
HDPE (High Density Poly Ethylene) Origin: Petrochemical Plant Grade: Blown Film Grade Shape: Granules Loading Port: Jeddah, Saudi Arabia
Item Test Condition Test Method Value Unit MFR 190 C/2.16kg ASTM D-1238 20 g/10min Density --- ASTM D-792 0.954 g/cm3 Tensile strength at yiled --- ASTM D-638 28 MPa Elongation at break --- ASTM D-638 250 % Impact tensile strength --- ASTM D-1822 42 kJ/m2 ESCR ASTM D-1693 3 --- VACIT --- ASTM D-1525 127 C
