Reinforce Rib Mesh

Welded Wire Reinforcement (WWR) provides the exact size of reinforcement where needed through variable bar size and spacing, thereby reducing steel waste. Plain Square Mesh sheets are a multi-purpose mesh and complies with AS/NZS 4671 : 2001 Steel reinforcing materials. Plain Square Mesh sheets are available in 6 x 2.4 m. Associated standards: AS/NZS 4671 : 2001 Steel reinforcing materials Application: Welded Wire Reinforcement can be used for: Slab on Grade reinforcement Floor and Walls Systems Topping Slabs Architectural precast wall panels Tilt-up construction wall systems Shear walls Retaining walls Mechanically Stabilized Earth (M.S.E.) reinforcement

reinforcing mesh SL82 1. Material: Low carbon steel ribbed wire 2. Standard: AS/NZS4671:2001 3. Main hole size: 200x200mm, edge 200x100mm 4. Wire diameter: main wire 7.6mm, 4 longitude edge wire 5.37mm 5. Sheet size: 2.4m x 6m 6. Application: bridge, road, building, sidewalk,etc. 7. Package: steel belt, pallet 8. Delivery: within 15 days for one container 9. Payment: T/T, 30% deposit, 70% by the copy of B/L

RL1218 concrete reinforcement welded mesh 25*11.90@100 by 30*7.60@200 Main hole size: 200x200mm, edge 200x100mm Sheet size: 2.4m x 6m

Product Name: Ribbed wire International standard: MS 144:2001 RM ribbed wire has a ribbed ontop of plain round wire, and it is come with either in coils form or cut to sizes length. This ribbed wire are widely used in the fabrication of reinforcing mesh. It enhances the performance of structural concrete slabs and increase the tensile strength. Sizes: 6.00mm 7.00mm 8.00mm Lengths: 4 meters 12 meters Tensile strength N/mm2: Min 500 - 1275 Packing: a) Cut to sizes length, either straight or folded per bundles b) Coil form in 500 1 ton per coil. Application: 1. manufacture of wire mesh fabric of reinfocement concrete 2. prestressing of concrete 3. reinforcement for concrete slabs 4. partition panels 5. building construction 6. ties and lifting 7. general engineering or construction purposes

Concrete reinforcement mesh is classified ribbed concrete reinforcement mesh and plain steel wire concrete reinforcement mesh. The wire of ribbed concrete reinforcement mesh is 3 faces indentation.Please see figuer Concrete reinforcement mesh is always used on residential slabs and footing-construction and BCA complying with AS 2870,which is always paced in all reinforced conrete members to stop the concrete cracking. And F62/F72/F82/F92/F1018 concrete reinforcement mesh is old specification,was replaced by SL62/SL72/SL82/SL92/RL1018.For example:previously called F62(now SL62) is wire diameter 6mm bars welded together in a 200mm square grid.the panel size is 2.4m X6m. The Tensile strength is 300Mpa. The concrete reinforcement mesh specification as below: Reinforcing Mesh Code wire diameter aperture edge open width length weight per sheet(kgs) F62 5mm 200*200mm 200mm 2.4m 6m 20.92 F72 6mm 200*200mm 200mm 2.4m 6m 30.12 F82 7mm 200*200mm 200mm 2.4m 6m 41 F92 8mm 200*200mm 200mm 2.4m 6m 53.55

Concrete Reinforcing Mesh Panel also called: Steel Bar Welded Wire Mesh /reinforcing welded mesh panel,cold ribbed steel bar mesh,welded wire mesh. Material: steel bar Weaving: the wires that run parallel to the width of the roll are placed on top of the wires running parallel to the length. Then, the wires are welded where they intersect. Wire diameter: welded steel bar panels ranges from 5mm to 16mm. Applications: Welded steel bar panels are widely used in construction reinforcement, the ground for the tunnels, bridges, highway, airport and wharf, also in construction of wall body. Features: Solid construction, Easy handling Packing: PVC Shrink, Moister-proof paper, Carton, pallet, Wooden Box , Special packing can be arranged upon request

Reinforcing Trench Mesh made from CRB550(550MPa) ribbed wires. The reinforcing trench mesh products all come 6.0m longs, available in 3-Bar, 4-Bar, 5-Bar and 6-Bar, as well as 8, 11 and 12mm wires. Its long, narrow sheets of concrete reinforcing mesh, has the continuous lengths of joint reinforcement that are embedded into the horizontal mortar joints of masonry walls. Joint reinforcement has long proven to be necessary for superior performance of masonry wall construction. Used specifically for residential footing trenches, paths or other narrow spaces. Length m Width m Longitudinal Wires mm Cross Wires mm Mass Kg 6.0 0.2 7.6 @ 100 4.77 @ 300 7 6.0 0.3 7.6 @ 100 4.77 @ 300 9 6.0 0.4 7.6 @ 100 4.77 @ 300 12 6.0 0.5 7.6 @ 100 4.77 @ 300 14 6.0 0.2 10.7 @ 100 4.77 @ 300 13 6.0 0.3 10.7 @ 100 4.77 @ 300 18 6.0 0.4 10.7 @ 100 4.77 @ 300 22 6.0 0.5 10.7 @ 100 4.77 @ 300 27 6.0 0.2 11.9 @ 100 4.77 @ 300 16 6.0 0.3 11.9 @ 100 4.77 @ 300 22 6.0 0.4 11.9 @ 100 4.77 @ 300 27 6.0 0.5 11.9 @ 100 4.77 @ 300 33

SE92/SE82/SE72/SE62 concrete reinforcing mesh for structural using Heyou factory can produce concrete reinforcing mesh which is the specification of New Zealand standard AS-NZS 4761-2001. Details of concrete reinforcing mesh: Material:250N,500N,500L,300E,500E Mesh Pitch:200mm Wire:ribbed steel wire & plain steel wire Overhang length of two sides:100mm Wire diameter:6mm,7mm,8mm,9mm Size:2.4m*6m or 2.2m*5.8m Packing:1ton more or less per bundle HS code:73142000 Production Standard: AS-NZS 4671-2001 More feature of concrete reinforcing mesh as below: Signel-bar meshes Twin-bar meshes Plain concrete reinforcing mesh Ribbed concrete reinforcing mesh The ribbed is visible and deep notch. high quality steel bar as raw materials Resposibility worker for drawing,straightened and cut Electric resistance welding,the solder joint firmly and beautiful appearance Full auotamatic machine opreation,the panel size high accuracy, Neatly packing Big place and enough warehouse for stocks The specification of concrete reinforcing mesh as below concrete reinforcing mesh specification Mesh Type and reference number Longitudinal bars Cross-bars Mass for 6x2.4m sheets Cross-sectional area/m width No. x dia., mm Pitch,@mm No. x dia., mm Pitch,@mm Unit area,kg/sqm Sheet,kg Longâ??l bars,sqmm/m Cross bars,sqmm/m Structural and skatch SE92 13 X9.0 200 30 X9.0 200 5.0 75 318 318 SE82 13 X8.0 200 30 X8.0 200 3.9 59 251 251 SE72 13 X7.0 200 30 X7.0 200 3.0 45 192 192 SE62 13 X6.0 200 30 X6.0 200 2.2 33 141 141 Non-structural SL51.5 17 X5.3 150 40 X5.3 150 2.2 32 147 147 SL41.5 17 X4.0 150 40 X4.0 150 1.3 19 84 84 Are you a Manufacturer? Heyou wire mesh factory as a professional factory for reinforcement mesh,which has 10 workshops,more than 200 workers,advanced production line,perfect production process, Strict production regulations. We own ourselves laboratory for inspected chemical composition and mechnical property of raw material,drawn wire diameter measuring,cutting wire length measurement ,and full pieces of concrete reinforcing mesh which contained pitch of wire to wire,shearing resistance,tensile strength,yeild strength,elongation,bend test,weight tolerance,size tolerance,ribbed height,pitch of transverse wire ribbed,surface quality and etc. We are strictly to do everything in order to guarantee our concrete reinforcing mesh quality. Therefore,Heyou Wire Mesh has a high reputation in our field as real manufacturer.

concrete slab square mesh provides the exact size of reinforcement where needed through variable bar size and spacing, thereby reducing steel waste. Plain Square Mesh sheets are a multi-purpose mesh and complies with AS/NZS 4671 : 2001 Steel reinforcing materials. Plain Square Mesh sheets are available in 6 x 2.4 m. Associated standards: AS/NZS 4671 : 2001 Steel reinforcing materials Application: Welded Wire Reinforcement can be used for: Slab on Grade reinforcement Floor and Walls Systems Topping Slabs Architectural precast wall panels Tilt-up construction wall systems Shear walls Retaining walls Mechanically Stabilized Earth (M.S.E.) reinforcement