Model
Item HBW-03
Nominal cooling capacity kcal/h 7405
Kw 8.61
Input power kw 3.05
Power supply 3pH~380V 50Hz
Refrigerant type R407C
Type of control capillary
Compressor type hermetic scroll
Power (kw) 2.68
Condenser type shell and tube
Cooling water flow(m3/h) 1.77
Inlet and outlet pipe diameter(inch) 1-1/2
Evaporator type tank with coil
Chilled fluid flow(m3/h) 1.48
Volume(L) 60
Inlet and outlet pipe diameter(inch) 1
Pump power(kw) 0.37
Lift(m) 25
Safety protection compressor over temperature, over current, high and low pressure, over temperature, flow switch, phase sequence, phase-missing, exhaust overheating
Weight kg 130
Dimension mm 890*500*840.
Parameter Refrigerating capacity: 2.77kw to 177.6kw Power supply: 3ph ~ 220v/200v/380v/415v ~ 50hz/60hz Refrigerant: r407c Compressor: hermetic scroll type Power of compressor: 0.89kw to 22*2kw Condenser: shell-and-tube type / copper-tube and the aluminum fin Evaporator: water tank with coil tube Capacity of the water tank: 20l to 620l Power of water pump:0.37kw to 3kw Refrigerated water temperature range:5 deg. C to 35 deg. C; temperature difference of inlet and outlet refrigerated water is from 3 deg. C to 8 deg. C. Cooled water temperature range: 18 deg. C to 35 deg. C; temperature difference of inlet and outlet cooled water is from 3.5 deg. C to 10 deg. C. Main parts: Compressor : daikin (japan) / sanyo (japan) / copeland (america) Evaporator: anges (hong kong) Expansion valve: alco/ emerson (america) Electric components: schneider (france) Water pump: pentax (italy) / feiyanghi-line (taiwan).
Environmental-friendly sulphur dyes All kins
Appearance: White Powder Solubility: It is soluble in ester, ketone, aromatics and alcohol ethers. It is insoluble in 200# gasoline and alcohol. Characters: 1, Good adhesion and High hardness; 2, Good compatibility with CAB or NC; 3, Non yellowing and good resistance to weather; 4, Good compatibility with other resins; 5, Good adhesion with plastic substrate; Specification: TYPE NO.: AR-001 AR-002 AR-66 AR-70 AR-800 ( ALCOHOL SOLUBLE ) Solid Content (%) 100 100 100 100 100 Softening Point (�ºC) 115----130 115----128 130----150 150----160 108 Acid Value (mgKOH/g) 18----35 18----35 3----6 5----8 4.29 Tg (�ºC) 45 40 50 61 39.69 Viscosity (25�ºC mpa.S) 250--450 250--450 2000--4000 250--0450 100--200 Application: AR--001 Exterior wall coating, fire retardant coatings AR--002 Road marking paint, floor coatings AR--66 Inks, Plastic coatings, container coatings AR--70 Plastic coatings, PVC Inks AR--800 Ink, plastic coatings, environment--friendly coatings Packing: 25kgs net per bag, 12500kgs/1x20`gp with pallet. Storage: Should be stored in dry, aeration area, avoiding the wet. The valid store period is two years.
Welcome to A.S Engineers & Fabricators, your trusted partner for quality powder coating solutions. Powder coating is a versatile and durable finishing process that provides a smooth, uniform, and high-quality surface to metal products. At A.S Engineers & Fabricators, we specialize in providing expert powder coating services to enhance the appearance and longevity of your products. Our state-of-the-art facilities and experienced team ensure precise application and superior results, whether you need powder coating for industrial equipment, automotive parts, or architectural components. With a wide range of colors and finishes available, we can customize the coating to meet your specific requirements and aesthetic preferences. Experience the benefits of powder coating with A.S Engineers & Fabricators â?? where quality meets excellence Durability Powder coating creates a durable and tough finish that is resistant to chipping, scratching, fading, and corrosion. This makes it ideal for products exposed to harsh environments or heavy use Uniform Finish Powder coating provides a smooth and consistent finish without drips, runs, or sags. This uniformity enhances the appearance of the product and ensures a professional look Wide Range of Colors and Finishes There is a vast selection of colors, textures, and finishes available in powder coating, allowing for customization to match any design or aesthetic requirement. Environmentally Friendly Powder coating is an environmentally friendly process as it produces minimal waste and contains no solvents or volatile organic compounds (VOCs). It also generates less hazardous waste compared to liquid paints. Cost-Effectiveness While the initial investment in equipment and setup may be higher, powder coating offers long-term cost savings due to its durability and reduced maintenance requirements Fast Processing Powder coating typically requires shorter processing times compared to traditional painting methods. Once the coating is applied, it can be quickly cured, resulting in faster turnaround times for finished products Key Features Durable Finish: Powder coating provides a durable and resilient finish that is resistant to chipping, scratching, and fading, ensuring long-lasting protection for the coated surface. Wide Range of Colors and Finishes: With an extensive selection of colors, textures, and finishes available, powder coating allows for customization to match any design or aesthetic requirement.
Zinc borate is primarily used as a flame retardant in plastics and cellulose fibers, paper, rubbers and textiles. It is also used in paints, adhesives, and pigments. As a flame retardant, it can replace antimony trioxide as a synergist in both halogen-based and halogen-free systems. It is an anti-dripping and char-promoting agent, and suppresses the afterglow. In electrical insulator plastics it suppresses arcing and tracking. 1.As a non - dangerous product , this product can be transported and stored as a common chemical . 2.Usually , the product is packed for 25/40 kg|bag, but if needed , we can also pack as your instruction.
Cocamidopropyl betaine (CAPB) is a mixture of closely related organic compounds derived from coconut oil and dimethylaminopropylamine. Cocamidopropyl betaine (CAPB) is a pale yellow chemical compound that is used as a secondary surfactant in most personal care and household cleaning products. The product is easily soluble in water with a pH range of 5-6 in a 10% aqueous solution. CAPB is generally considered skin-friendly and environment friendly and as it is derived from coconuts, it's considered a natural and safe surfactant. This is the reason why Cocamidopropyl betaine manufacturers supply the product in various natural origin cosmetic formulations as well.
1.Working process: Firstly , put the raw material into furnace, then seal the feed inlet system. Secondly, burned the fuel material(coal, or wood, or natural gas , oil ) in the combustion system, the reactor will slowly heat , when the temperature reaches around 250 degree celsius, it will produce oil gas, oil gas will be processed by our technology , then go to cooling system to cold liquid oil. The gas which can not be liquid under normal pressure , which will be designed to back to combustion system to instead the fuel material to burn the reactor, which can save energy very much . After finishing oil produce , the temperature of reactor will be down, At the same time , carbon black will be discharged automatically. Lastly, when the temperature falls to 100 degree celsius, worker could open the door of reactor to discharge of steel wire . Then can start another batch working. 2.The usage of final production-----fuel oil Fuel oil from waste tyre are used in below industries A.Power plant factory B.Glass factory C.Cement factory D.Ceramic factory E.Aluminum factory F.Boiler factory G.Central heating factory H.Painting factory The usage of final production-----carbon black Carbon black from waste tyre are used in below industries A.Electric cable jacketing B.Conveyor ban C.Hose and doormat D.Black nylon bag E.Rubber additive F.Automatic spare parts G.Heat isolation H.Black colorant in rubber materials I.Plastic pipes J.Industries rubber products K.Fire fighting The usage of final production----- steel wire Steel wire from waste tyre can be re-sale to steel factory. It varies according to diffrent capacity.
Our range of Organic Pigment is highly effective and is available in various grades. These are non-toxic and environment-friendly making them safe for use. We source our range from reputed vendors based across the globe, we make sure that there remains no flaw in the quality of our range. Used In Paints Inks Coatings Plastics & Polymers Concrete Characteristics Optimum dispersion in respective medium as per application area. Good colour value Excellent AR/SR resistance Passes EN test parameters. Excellent performance & cost saving
Supplier: Environment-friendly liquid sulphur dyes
