Kds Flymentor Rc Helicopter Stabilizer

Connecting device Switch on the kds flymentor (make sure the main motor is disconnected), then plug the connection cable into the usb slot of the kds flymentor. The flymentor ppc will switch on and you can see the screen shown as below. After few seconds, the flymentor ppc will finished handshake with kds flymentor, you can see the main menu on the screen like picture2. The device type of kds flymentor is shown in title bar, it is "kds flymentor 3d" in the upper picture. Main menu There are nine items in main menu , each item contains a set of settings for flymentor. You can move the cursor to the item you want by press up and down, press ok you can enter the item and modify the settings. See table 1 for details of them. You can also press the load/save button here, then the load/save menu will be shown. Modify parameters When you press ok in the main menu, you will enter the settings section for some items, for example, the sixth item, 'tail gyro' settings, like the following picture. In this stage, you can select the parameter by press up and down, when the cursor is pointed to the value you want to modify, press ok, then the value will be shown as black background like picture 5. If you want to return back to main menu, press esc. Then you can modify the value by press up or down, after modification, press ok, the new value will be saved, or you can press esc to cancel this modification and the value will be restore. When you press ok, there will be a star character for few seconds, that means the parameter is being saved. -kds flymentor program card x 1 -connection cable x 1 -instruction cd x 1

1)fuselage length:425mm 2)fuselage height:188mm 3):flying weight:227g 4):motor:180x2pcs 5):trasmitter:4 channels 6):program type:ppm 7):"4 in 1" controller: 4 channels 8):servo:8gx2pcs 9):battery: 7.4-800mah li-polymer battery 10):flying time:14-18 minutes Model features: 1) the helicopter is designed with double-blade-sharing -one -axis that with stability and enables it to easy be operated, which is fit for beginner flight. 2)two180 motors, which make the helicopter with full of power, and flying-off is stable. 3) there are servo range adjustment and gyro sensitive degree adjustment in the 4 in 1 controller . You can adjust parameter by yourself' s skill and fly more pleasing . 4) fast mini servos , which make the dynamic response of the helicopter more exact and nimble. 5) the helicopter is designed with two stabilizer weights that improve the ability to settle its axis and enable it to hang in the air more stable. 6)with power supply of li-ploymer battery enable it to use more safe and fly time longer.Packing:inner packing:gift boxout packing:six gift boxes to one cartonpacking protector: foamgift box size:494*185*228mmcarton size:510*385*710mmcarton g.W/n.W 10.5kg/5.7kg

rc helicopter Specification: 1) total length·ª.............390mm 2) total width·ª..............140mm 3) total height:..............165mm 4) total weight·ª.............250g 5) main rotor length:.........350mm Essential accessories: 1) motor·ª 130 main motor 2) battery·ªli-polymer 7.4v, 1000mah 3) charger: 12v, 350ma 4) main rotor (carbon fiber) Model features: 1) it can simulate basic acts of lama such as hanging, advancing, retracting, yawing, etc. 2·¼it applies design of co-axial double-propeller and inverted rotating. The upper propeller produces lift and at the same time balances the airframe. And the lower propeller produces different speed differential and change the angel of the propeller while producing lift so as to realize the swerving and yawing of the helicopter. The unique design of co-axial inverted rotating of two propellers eliminates produced torsion and makes flying more stable and swift. 3) high quality pa and pp materials with good stiffness that enhances its anti-break capability 4) adopts emulation airframe design to furnish it with excellent external appearance. 1111111111111