Flymentor 3d is a stabilization unit that not only stabilizes the rc helicopter against external inputs such as wind turbulence, but will also hold the helicopter in position. The flymentor uses both gyros and and a ccd imaging device to help stabilize the helicopter. The gyros stabilize orientation and the ccd holds position with respect to the ground. Let go of the controls and the flymentor will upright your helicopter (of course within reasonable limits!). This system has multiple applications from stabilizing your aerial photography platform to acting as an electronic insurance policy when you¡¯re learning to fly better. - kds flymentor 3d x 1 set
RC helicopter
2ch.3ch.3.5 ch .All helicopter we can sale to you. Weight 12
This helicopter is designed for indoor and outdoor flight. Emitter adopt newest 2.4g make band pair technology, could auto make band pair, separate and exact make band pair. After making pair, you can fly helicopters at same time. Features: charging time: 40-60 min. Flying time: 8-10 min. Channels: 4 ch Length: 15 inches Width: 3 inches Height: 5 inches Weight: 0.5 lb. Battery: 7.4v polymer battery / 850mah For ages: +14 Comes 8 in a box
H48 drone rc quadcopter Main Features: 2.4GHz control system: Ensures the stronger anti-interference performance and powerful signal 360-degree flip: The quadcopter will flip forward / backward / leftward / rightward according to your instructions 6 axis gyro: Provides the best stability during indoor and outdoor flight Colorful LED light: The drone will shine in the darkness, shows you the right flying direction and gives you a special look Super mini design: Easy to carry, takes it into your pocket and enjoys flight anywhere anytime Tumbling skill: It can realize 3D tumbling in four directions with colorful LED lights Speed switch: High-low speed modes can be changed by the transmitter
Connecting device Switch on the kds flymentor (make sure the main motor is disconnected), then plug the connection cable into the usb slot of the kds flymentor. The flymentor ppc will switch on and you can see the screen shown as below. After few seconds, the flymentor ppc will finished handshake with kds flymentor, you can see the main menu on the screen like picture2. The device type of kds flymentor is shown in title bar, it is "kds flymentor 3d" in the upper picture. Main menu There are nine items in main menu , each item contains a set of settings for flymentor. You can move the cursor to the item you want by press up and down, press ok you can enter the item and modify the settings. See table 1 for details of them. You can also press the load/save button here, then the load/save menu will be shown. Modify parameters When you press ok in the main menu, you will enter the settings section for some items, for example, the sixth item, 'tail gyro' settings, like the following picture. In this stage, you can select the parameter by press up and down, when the cursor is pointed to the value you want to modify, press ok, then the value will be shown as black background like picture 5. If you want to return back to main menu, press esc. Then you can modify the value by press up or down, after modification, press ok, the new value will be saved, or you can press esc to cancel this modification and the value will be restore. When you press ok, there will be a star character for few seconds, that means the parameter is being saved. -kds flymentor program card x 1 -connection cable x 1 -instruction cd x 1
Rc airplane, RC helicopter, spare parts.
1)fuselage length:425mm 2)fuselage height:188mm 3):flying weight:227g 4):motor:180x2pcs 5):trasmitter:4 channels 6):program type:ppm 7):"4 in 1" controller: 4 channels 8):servo:8gx2pcs 9):battery: 7.4-800mah li-polymer battery 10):flying time:14-18 minutes Model features: 1) the helicopter is designed with double-blade-sharing -one -axis that with stability and enables it to easy be operated, which is fit for beginner flight. 2)two180 motors, which make the helicopter with full of power, and flying-off is stable. 3) there are servo range adjustment and gyro sensitive degree adjustment in the 4 in 1 controller . You can adjust parameter by yourself' s skill and fly more pleasing . 4) fast mini servos , which make the dynamic response of the helicopter more exact and nimble. 5) the helicopter is designed with two stabilizer weights that improve the ability to settle its axis and enable it to hang in the air more stable. 6)with power supply of li-ploymer battery enable it to use more safe and fly time longer.Packing:inner packing:gift boxout packing:six gift boxes to one cartonpacking protector: foamgift box size:494*185*228mmcarton size:510*385*710mmcarton g.W/n.W 10.5kg/5.7kg
rc helicopter Specification: 1) total length·ª.............390mm 2) total width·ª..............140mm 3) total height:..............165mm 4) total weight·ª.............250g 5) main rotor length:.........350mm Essential accessories: 1) motor·ª 130 main motor 2) battery·ªli-polymer 7.4v, 1000mah 3) charger: 12v, 350ma 4) main rotor (carbon fiber) Model features: 1) it can simulate basic acts of lama such as hanging, advancing, retracting, yawing, etc. 2·¼it applies design of co-axial double-propeller and inverted rotating. The upper propeller produces lift and at the same time balances the airframe. And the lower propeller produces different speed differential and change the angel of the propeller while producing lift so as to realize the swerving and yawing of the helicopter. The unique design of co-axial inverted rotating of two propellers eliminates produced torsion and makes flying more stable and swift. 3) high quality pa and pp materials with good stiffness that enhances its anti-break capability 4) adopts emulation airframe design to furnish it with excellent external appearance. 1111111111111
Rc radio, rc, helicopter, remote control, transmitter, logger, digital pitch gauge, 6 channel, mini rc, rc hobby, rc model, hobby, rc toys, rc logger, dx6i, 2.4g radio, 2.4g receiver, radio control, rc logger pitch, rc logger 2, rc parts, rc helicopters.
Carbon fiber sheet is the mainstream environmental friendly new product of the century, it features high strength, abrasion resistant, weather-proof, waterproof, air-pervious. Features: 1. Very light and very strong. 2. High strength and high modulus. 3. Excellent fatigue resistance. 4. Corrosion resistance. 5. Electrical conductivity. 6. Excellent Structural Properties. 7. UV Resistant Inhibited. 8. Non-Conductive Thermally. 9. Excellent planeness. 10. Very flexible. 11. Nice appearance. Application: 1. UAV, RC Toy model , Aeromodelling, Helicopter Model. 2. Electrical products. 3. Shipbuilding. 4. Space aviation defense. 5. Sports equipments. 6. Automobile parts. 7. Wind power blades. 8. Spinning Reels Brake Rotor friction plate, Rocker. 9.Medical device(X-ray, DR). 10. Etc.
RC helicopter, RC airplane.
Material: alloy Description:the hottest 3ch r/c helicopter with gyro Place of origin: shantou, chenghai, china Technical data: * flying time: 6-10mins * charging time: 30mins * control distance: 10m * battery: 3.7v180mah Packing details * 1pcs in a window box * product size:24*19*10.8cm * pcs/ctn: 36pcs * ctn meas.:77*43*66cm
Control Area: 10m, Height Of Flying: 10m, Fly Time: 8min, Charging Time: 30 mins, Battery: 3.7V Lithium 150MAH. Standard Features: Transmitter,Battery,USB charger,Tail blade,Instruction Manual. Specification: 22.50 * 4.50 * 11.50 CM Measurement: 63.00 * 50.00 * 30.00 CM Q'ty, Ctn: 32PCS, CTN Measurement: 0.095 CBM.
3channels with gyro: up, down, turning, forward, backward, alloy main frame, hover.Accelerator. Medium helicopter, 3 channels, Alloy main frame, With gyro and accelerator, With missile-shape lights at both sides, Packed with a usb cable, Infrared control, Flying time 7-8 min.
Big helicopter, 3 channels, Alloy main frame, With gyro, Missile-shaped led lights Radio control, Flying time 7 min. At least, Recharging time 90-120 min. Helicopter length : 38 cm long Windowbox size : 56*11*22.5.
Item specifics Condition: New: A brand-new, unused, unopened, undamaged item Brand: X-team UPC: Does Not Apply Color: Orange Type: Quadcopter Kit Model: 2200kv Brushless Motor 2212-6 Compatible Fuel Type: Electric Features: 100% Brand New and High Quality Model: 2212-6 RC 2200KV Brushless Motor 2212-6 Introductions: Constant Current: 30A Low-voltage Cutoff: Auto detect Input: 2-3 LiPo or 5/10 NiMH Material:plastic What is included: 1 x 2200kv Brushless Motor 2212-6
RC helicopter.
RC helicopter & compound rubber.Logistics
Rc toys, model toys, rc helicopter.