Melt-Blown Pp Filter Cartridge

Introduction The ARRP series filter cartridge uses odorless and non-toxic PP as raw material. It is formed into a tubular filter cartridge through a process involving heating, melting, spinning, pulling, and molding. This product adopts a progressive process and a design of outer sparse and inner dense, which can maintain a stable flow rate and show excellent deep filtration effect. Its main features include low resistance, high dirt holding capacity, corrosion resistance and strong chemical compatibility. Specification Filter material: PP Diameter: 61 ~ 114 mm Pore size: 1 ~ 100 micron Length: 5" ~ 60" Interface type: 222, 226, 215, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Suitable for solution filtration of larger particles in various industries. Widely used in PCB, electroplating solution, pure water engineering, food and drinking water pre-filtration, etc.

Lengths: 5”, 10", 20", 30", 40", 50” Inches Outside Diameter: 62/63 mm In Side Diameter: 25/28 mm

PP , Melt blown filter cartridge, 5 micron. ID:1.1(28mm) OD:2.5(63mm) L:10 (254mm)

Description Yitong melt-blown filter cartridges are made of avirulent and flavorless polypropylene particles, after heating, melting, spinning, drawing, forming to tubular deep filter cartridge, have outstanding chemical compatibility, strong pollutant carrying capacity, long service life, and low cost advantages. provides depth loading liquid filtration at ratings from 1 micron to 100 micron, offer uniform, consistent dirt loading throughout the life of the filter cartridge. Application 1 Drinking water treatment 2 Pre-filtration for RO+DI 3 Acid and lye filtration in electronic industry 4 High technology coatings 5 Plating,Chemicals and Solvents

PRODUCT SPECIFICATIONS Micron Rating : 1, 5, 10, 20 � Length : 10" / 20" / 30" / 40 Inner Dia for standard size : 28 mm Inner Dia for jumbo size : 28 mm Outer Dia Outer : 60-64 mm (2/ 2.5) Dia for jumbo size : 102-112 mm (4/4.5) Max operating temperature : 80 C Max Differential Pressure : 3-4 bar (50 psi) @ 21C

Melt blown (spun polypropylene) filters with 50% lower pressure drop and long service life. Specification STRUCTURE Depth melt-blown filter cartridge is made of pure polypropylene, by phase-in changes on the precision from inside to outside, it maximizes the dirt holding capacity and minimizes the pressure loss. Results in very long service time. FEATURES 1 High Dirt Hoding Capacity 2 50% Lower Pressure Drop 3 Long Service Life TYPICAL APPLICATION 1 Water Treatment 2 Corrosive Liquid Filtration 3 Food Industrial

China supplier Big Blue pp pleated filter cartridge for swimming pool , spa hot tup & water fountain High performance cartidge filters are one of the necessities for maintaining a clean and healthful swimming pool or SPA pool environment for your families,contaminatnts and debris are collected in the pleated fiber element.The filter element is easily removed from the filter tank for period cleaning,eliminating the need for backwashing of the filtration system. Features: � 14 years experience in the business � 500 different types to match different manufacturers � Made with Authentic Reemay Media Which is well accepted by customers � Quality Products � Competitive Price � Excellent Service Specification: OD: 2-16" Length: 4"--- 40" Filter Rating: 1μ---50μ. Filter meterial : polyester non-woven cloth,PET or according to your requirement Filter Area : 2sq ft---300sq ft. Work Temperature : 1°C---50°C Pressurization : 0.1---0.6MPa -

Introduction The ARLP series micropore filter cartridge is made of PP microfiber as the filtration medium, and the filtration material meets the relevant FDA requirements. The product is formed by folding the combination of multi-layer filter membranes, achieving a stable deep filtration effect. Its main features include low filtration resistance, high dirt-holding capacity, long service life, stable structure, wide chemical compatibility, etc. It is suitable for pre-filtration of various liquids. Specification Filter material: PP micropore filter membrane Diameter: 69 mm Pore size: 0.1 ~ 60 micron Length: 5" ~ 60 " Interface type: 222, 226, 215, 213, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Primary filtration of filtration systems in the pharmaceutical, chemical solvent, food and beverage, microelectronic industries, pure water systems, petrochemical and other industries.

Introduction The ARTB series filter cartridge uses high-purity titanium powder as the raw material, processed through high-temperature vacuum sintering. It features high porosity, uniform pore size distribution, and unique capabilities to withstand temperatures up to 300 degrees Celsius (in wet conditions) as well as strong acids and alkalis. This product is easy to backwash, enabling effective regeneration, and is suitable for separating and purifying various gases or liquid media. Specification Filter material: High-purity titanium Pore size: 0.22 ~ 100 micron Length: 5" ~ 40" Diameter: 60 ~ 100 mm Physical regeneration methods: a. Pure water backwashing b. Steam blowback c. Ultrasonic cleaning Chemical treatment methods: a. Alkaline washing b. Acid washing Interface type: 222, 226, 215, DOE, M20, M30, M36, M42 Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Pharmaceutical industry: Decarbonization and impurity removal filtration in the production of raw pharmaceutical materials. Chemical industry: Filtration of strong acidic and alkaline chemical solvents. Water treatment industry: Pre-filtration for reverse osmosis systems, seawater desalination, wastewater treatment systems, etc. Gas industry: Purification of compressed air and catalytic gases, filtration in ozone sterilization systems. Food industry: Clarification filtration for food and beverages, edible oils, soy sauce, vinegar, and other products.