Description
Yitong melt-blown filter cartridges are made of avirulent and flavorless polypropylene particles, after heating, melting, spinning, drawing, forming to tubular deep filter cartridge, have outstanding chemical compatibility, strong pollutant carrying capacity, long service life, and low cost advantages. provides depth loading liquid filtration at ratings from 1 micron to 100 micron, offer uniform, consistent dirt loading throughout the life of the filter cartridge.
Application
1 Drinking water treatment
2 Pre-filtration for RO+DI
3 Acid and lye filtration in electronic industry
4 High technology coatings
5 Plating,Chemicals and Solvents
PP , Melt blown filter cartridge, 5 micron. ID:1.1(28mm) OD:2.5(63mm) L:10 (254mm)
Melt blown (spun polypropylene) filters with 50% lower pressure drop and long service life. Specification STRUCTURE Depth melt-blown filter cartridge is made of pure polypropylene, by phase-in changes on the precision from inside to outside, it maximizes the dirt holding capacity and minimizes the pressure loss. Results in very long service time. FEATURES 1 High Dirt Hoding Capacity 2 50% Lower Pressure Drop 3 Long Service Life TYPICAL APPLICATION 1 Water Treatment 2 Corrosive Liquid Filtration 3 Food Industrial
Description PP Melt Blown Filter Cartridges are high dirt holding capacity, low pressure drop, high flow rate, good chemical resistance, no fibre release, longer service life and effectively filtration for suspended particle, sediment and other kinds of impurities. PP Melt Blown Filter Cartridges are economical and classical filter media, widely used in liquid prefiltration industries. Specification Filter MediaPolypropylene Length5", 9.75", 9.8", 10", 20", 30", 40", 50", 60", 70" (According to customers requirements) Inside Diameter28mm, 30mm (Special ID is accepted) Outside Diameter2.36"(60mm), 2.4"(61mm), 2.5"(63mm), 2.55"(65mm) (Special OD is accepted) Filtration Rating1um, 5um, 10 um, 20 um, 30 um, 50 um, 75 um, 100 um Gasket/O-ringSilicone, EPDM, Viton, Buna End CapDOE, 222/Flat(SOE), 222/Fin(SOE), 226/Flat(SOE), 226/Fin(SOE) Feature 1. PP Melt Blown Filter Cartridges are mainly applied to most industry standard housings 2. 100% FDA approved safety polypropylene material have a lot of demanding applications 3. Superior PP Melt Blown Filter Cartridges are high filtration efficiency, consistent good performance 4. PP Melt Blown Filter Cartridges are multi-layered construction, high contaminant holding capacity and long service life 5. Customized special PP Melt Blown Filter Cartridges are accepted to meet specific application requirements 6.Many types of end caps are available by thermally-bonded, such as 222/fin, 222/flat, 226/fin, 226/flat etc. Applications 1.PCB industry 2.Plating solution 3.Food & Beverage 4.Electronic Industry 5.Petrochemical Process 6.Chemicals and Solvents 7.Pre RO/ID water filtration 8.Industrial waste water treatment
Introduction The ARRP series filter cartridge uses odorless and non-toxic PP as raw material. It is formed into a tubular filter cartridge through a process involving heating, melting, spinning, pulling, and molding. This product adopts a progressive process and a design of outer sparse and inner dense, which can maintain a stable flow rate and show excellent deep filtration effect. Its main features include low resistance, high dirt holding capacity, corrosion resistance and strong chemical compatibility. Specification Filter material: PP Diameter: 61 ~ 114 mm Pore size: 1 ~ 100 micron Length: 5" ~ 60" Interface type: 222, 226, 215, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Suitable for solution filtration of larger particles in various industries. Widely used in PCB, electroplating solution, pure water engineering, food and drinking water pre-filtration, etc.
Description Hongtek APP Series Absolute PP Melt Blown Filter Cartridges are constructed with high-technology design that take advantage of flow pattern progressively from surface to inner center. Absolute PP melt blown filters have significant service life, accompanied by consistent high filtration efficiency. Absolute melt blown filters are manufactured with progressively graded density and 100% FDA approved polypropylene material, therefore, the absolute rate of PP filters could get to Beta 1000(99.9%) and have super-normal dirt holding capacity and longer service life than normal PP melt blown cartridges. Advanced absolute melt blown filter cartridges are available in high performance grading from 1 to 100 microns, with fine micro porous structure for high removal efficiencies. Absolute PP melt blown cartridges can be used both in pre-filtration and final filtration in food & beverage, pharmaceutical and water treatment applications. Feature 1. 99.9% filtration efficiency (Beta 1000) and exactly precision from 1 to 100 micron 2. Depth layers strucure, high contaminant holding capacity and longer filter service life 3. High anti-pressure ability, proprietary process delivers superior efficiency and economical cost 4. High filtration efficiency of absolute PP melt blown cartridges, consistent filtration performance 5. Absolute PP filters are made of 100% FDA polypropylene materials, free of binder, surfactant and adhesive 6. Absolute PP melt blown filters have excellent chemical compatibility, so used in a wide range of applications Application Food & Beverage Microelectronics PCB industry Chemical/Industrial Water Treatment Pharmaceuticals Petrochemical Process Pre RO/ID Water Filtration Electronic Industry
Description GPP Series Grooved PP Melt Blown Filter Cartridges are manufactured with advanced thermally bonded depth filtration through technological innovation. The rigid extrusion bonded technology for grooved PP melt blown filters provide more premium features than smooth-surface PP filter cartridges. Grooved surface structure increases surface area of grooved PP melt blown cartridges for extended filter life and higher dirt holding capacity. Rigid construction of grooved PP filters are made of 100% FDA approved polypropylene material with strong pressure-resisting ability and consistent particle removal efficiencies. Grooved PP melt blown filters not only meet some crucial industrial applications, but also significantly reduce the filtration cost. Feature 1.High particle removal efficiencies at high flow rates 2. Longer service life and fewer change-out to save some costs 3.Grooved design leads to low initial pressure drop for enhanced flow rate 4.End caps of grooved PP filters are available to meet most of filter housings 5.100% FDA approved high-class polypropylene material, no binders,additives and lubricants 6. Harder structure contributes to greater ability to work under pressure than normal pp melt blown filters Appllication Food & Beverage Process Cooling Water Prefiltration In Waterflood Parmaceutical Petrochemical Process Electronic Industry Chemicals and Solvents Sea Water Desalination Industrial Water Treatment
Material Membrane: PP fibre Core: polypropylene O ring/Gasket: Silicone/Viton/TEV/EPDM Specifications: Pore size (um): 1-100 Outer Diameter(OD): 63mm (can be decided by client) Length (inch): 10, 20, 30, 40 Endcaps: DOE, SOE (code2, code3, code7, code8) Technical data: Normal working temperature: 50 íµ/ 108¿H Max. working temperature: 90 íµ/ 194¿H (Pí_1.0 bar) Max. differential pressure: 4.2 bar PH value: 1-13 Sterilization method: Nil Export Standard package ( 1pc/Poly bag/carton)
Lengths: 5”, 10", 20", 30", 40", 50” Inches Outside Diameter: 62/63 mm In Side Diameter: 25/28 mm
OD 6 152.4mm L 40 1016mm 60 1524mm Flow 110m3h 60 Rate 1,3,5,10,30,50,70 Micron. Material PP Glass fiber Replacement PALL Pentair, Aquatec, Eaton, Graver, Mahle, Aqua