5V/12V DC Input Microwave Motion Sensor Highbay Version DC Input Motion Sensor Module Highbay DC Input Motion Sensor HNS111HB 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. Features 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. 0~10V DC output signal Super compact, flexible to be integrated into any suitable fixtures. Dual ï¹£ PD technology, real Daylight monitoring function for built-in application. IR remote commissioning, easy setting and user friendly. Detection range up to 18m in diameter. Mounting height: 10~12m. Operation temperature: -20 ~ +70 RoHS compliant. Settings(Remote control IR12) Permanent ON/OFF function Press ON/OFF button, fixture goes to permanent on or permanent off mode, sensor is disabled. *press "Auto" ,"Reset" or "Ambient learn" to quit this mode. Dim +/- Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved. *after desired brightness is locked down, if user wants to dim again reversely, just press the Dim button again and then lock down the new brightness again. Sensor mode Press "Auto" button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off. Reset function Press "Reset" button, all settings go back to factory default settings. Factory default settings Sensitivity=100% Daylight sensor=disable Hold time=90s Twilight time=5min Twilight level=10% Ambient learn Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance. Test mode "Test mode" is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button. Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly. *Test mode defaulted settings Daylight sensor=disable Hold time=3s Twilight time=N/A Twilight level=N/A In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off). -
Remote Control DC Input Motion Sensor Motion Sensor Module DC Input 5V/12V DC Input Microwave Motion Sensor ?? Remote Controllable Version HNS112 5.8GHz C-band microwave, tri-level dimming control. Input voltage 12V DC (5V & 24V DC version available on request). Features 5.8GHz C-band microwave, tri-level dimming control. Input voltage 12V DC (5V & 24V DC version available on request). 0~10V DC output signal. Super compact, flexible to be integrated into any suitable fixtures. Dual-PD technology, real Daylight monitoring function for built-in application. IR remote commissioning, easy setting and user friendly. Detection range up to 12m in diameter. Mounting height: 3~6m. RoHS compliant. Settings(Remote control IR12) Permanent ON/OFF function Press ??ON/OFF?? button, fixture goes to permanent on or permanent off mode, sensor is disabled. *press "Auto" ,"Reset" or "Ambient learn" to quit this mode. Dim +/- Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved. *after desired brightness is locked down, if user wants to dim again reversely, just press the ??Dim?? button again and then lock down the new brightness again. Sensor mode Press "Auto" button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off. Reset function Press "Reset" button, all settings go back to factory default settings. Factory default settings Sensitivity=100% Daylight sensor=disable Hold time=90s Twilight time=5min Twilight level=10% Ambient learn Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance. Test mode "Test mode" is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button. Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly. *Test mode defaulted settings?? Daylight sensor=disable Hold time=3s Twilight time=N/A Twilight level=N/A In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off). -
5V/12V DC Input Microwave Motion Sensor Highbay Version DC Input Motion Sensor Module Highbay DC Input Motion Sensor HNS111HB 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Features 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). 0~10V DC output signal Super compact, flexible to be integrated into any suitable fixtures. Dual ï¹£ PD technolo gy, real Daylight monitoring function for built-in application. IR remote commissioning, easy setting and user friendly. Detection range up to 18m in diameter. Mounting height: 10~1 2m. Operation temperatur e: -2 ~ +70 RoHS compliant. Settings(Remote control IR12) Permanent ON/OFF function Press ON/OFF button, fixture goes to permanent on or permanent off mode, sensor is disabled. *press "Auto" ,"Reset" or "Ambient learn" to quit this mode. Dim +/- Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved. *after desired brightness is locked down, if user wants to dim again reversely, just press the Dim button again and then lock down the new brightness again. Sensor mode Press "Auto" button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off. Reset function Press "Reset" button, all settings go back to factory default settings. Factory default settings Sensitivity=100% Daylight sensor=disable Hold time=90s Twilight time=5min Twilight level=10% Ambient learn Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance. Test mode "Test mode" is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button. Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly. *Test mode defaulted settings Daylight sensor=disable Hold time=3s Twilight time=N/A Twilight level=N/A In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off). -
5V/12V DC Input Microwave Motion Sensor Remote Controllable Version Remote Control DC Input Motion Sensor Motion Sensor Module DC Input HNS111 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. Features 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. 5V DC high-low voltage & PWM output signal(0~10v version available on request) Super compact, flexible to be integrated into any suitable fixtures. Dual - PD technology, real Lux -Off & Daylight monitoring function for built-in application. IR remote commissioning, easy setting and user friendly. Detection range up to 12m in diameter. Mounting height: 3~6m. Operation temperature: -20 ~ +70 RoHS compliant. Settings(Remote control IR12) Permanent ON/OFF function Press ON/OFF button, fixture goes to permanent on or permanent off mode, sensor is disabled. *press "Auto" ,"Reset" or "Ambient learn" to quit this mode. Dim +/- Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved. *after desired brightness is locked down, if user wants to dim again reversely, just press the Dim button again and then lock down the new brightness again. Sensor mode Press "Auto" button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off. Reset function Press "Reset" button, all settings go back to factory default settings. Factory default settings Sensitivity=100% Daylight sensor=disable Hold time=90s Twilight time=5min Twilight level=10% Ambient learn Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance. Test mode "Test mode" is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button. Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly. *Test mode defaulted settings Daylight sensor=disable Hold time=3s Twilight time=N/A Twilight level=N/A In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off). -
WQ-COND Rugged Water Conductivity Sensors Description WQ-COND Conductivity Sensors are suitable for measuring conductivity in a wide variety of applications including laboratories, streams, rivers, and groundwater. The conductivity sensor's small size and rugged housing make it useful for hand held measurements or permanent installation. WQ-COND Rugged Water Conductivity Sensors Features * Fully encapsulated electronics * Dual 4-20 mA outputs * Sensor armor available for harsh environments * Marine grade cable with strain relief * Measure conductivity up to 82 feet deep WQ-COND Conductivity Sensors Applications Ideal for stream and lake monitoring, aquaculture studies, baseline analyses, mitigation monitoring, and other environmental applications. WQ-COND Rugged Water Conductivity Sensors Specifications * Temperature Range: 23 to 158'F (-5 to 70'C) * Conductivity Accuracy: +0.5% of reading * Temperature Accuracy: +0.4'F (+0.2'C) * Temperature Resolution: 0.02'F (0.01'C) * Output: Dual 4-20 mA * Maximum Pressure: 35 psi (82 ft (25m)) * Warm-up Time: 3 seconds minimum * Operating Voltage: 10-36 VDC
Product Description Our wind direction sensors is mechanical rotate sensor, cup turns round once be blown. Digital circuits capable of strong RFI & EMI resistance and automatic temperature compensation are installed inside the sensor, it outputs voltage and current signals by electromagnetic induction, the value and horizontal wind speed are linear relation. Sensor external parts all are made of alloy material and finish by surface powder coating, featured with water proof, corrosion resisting. Inside and turning position have sealing rings with nice sealing function, stop water, salt fog and dust getting in. Parameter: Testing range 0~36 Start wind speed 0.8m/s Resolution 22.5 Accuracy ±3 Working Environment Temperature: -20C~+85C Humidity 95%RH Output 0-5VDC 4-20mA Resistance for current output 250 Working Voltage 12~30VDC (common 24VDC) Limit wind speed Max: 70m/s 30min Electrical connection M12 Environmental Protection IP65 Features detail Strong RFI & EMI resistance and automatic temperature compensation High sensibility, high precision, high frequency response and permanent stability Excellent resistance against impact, overload, shock and erosion
The reflection wavelength of the metal FBG temp. sensor has a linear relationship with temperature, which is suitable for temporary or permanent monitoring and easy to form a distributed sensing network. It is feasible for surface mounting, hanging, embedding, bolts and other fixing methods, and widely used in high and low temperature, high voltage and high electromagnetic environment, such as substation, power cabinet, wind power generation, hydraulic power generation, thermal power generation, underground mine and other projects for fire early warning.
ENDRESS+HAUSER PTP31-A1C13S1DD4A PRESSURE SENSOR PTP31A1C13S1DD4A BRAND : ENDRESS+HAUSER PART NO : PTP31-A1C13S1DD4A PRODUCT TYPE : PRESSURE SENSOR CONDITION : USED COUNTRY OF ORIGIN: ORDER(MOQ) : ONE AFTER SALES, SERVICE : AVAILABLE Shipping Terms: We generally ship via DHL Express in 1 Business Day after your item is purchased, product will be deliver in 3-4 Business days. Ship on Buyer Account/Local Pickup: Yes, we can ship on a customer's Shipping account. Local pickups are also accepted weekdays from 10-5 PM and by appointment. Payment Option: We prefer Bank Transfer. Contact us for other available PAYMENT OPTIONS. Returns: Unless Sold â??As-Is,â?? all of our products come with a 30 Day Warranty. If your item is received in a different condition than stated (DOA, not working properly etcâ?¦). We are more than happy to rectify any problems by replacing the item or issuing a refund. Feedback: We want our customers to be completely satisfied with their purchase. We think good communication ensures a successful transaction and efficient problem resolution in advance of posting permanent feedback and gives both parties the best chance for a positive trading experience. We Ship Internationally **Thank You**
Remote Control DC Input Motion Sensor Motion Sensor Module DC Input 5V/12V DC Input Microwave Motion Sensor Remote Controllable Version HNS112 5.8GHz C-band microwave, tri-level dimming control. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. Features 5.8GHz C-band microwave, tri-level dimming control. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. 0~10V DC output signal. Super compact, flexible to be integrated into any suitable fixtures. Dual-PD technology, real Daylight monitoring function for built-in application. IR remote commissioning, easy setting and user friendly. Detection range up to 12m in diameter. Mounting height: 3~6m. Operation temperature: -20�C~ +70�C. RoHS compliant. Settings(Remote control IR12) Permanent ON/OFF function Press ON/OFF button, fixture goes to permanent on or permanent off mode, sensor is disabled. *press "Auto" ,"Reset" or "Ambient learn" to quit this mode. Dim +/- Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved. *after desired brightness is locked down, if user wants to dim again reversely, just press the Dim?? button again and then lock down the new brightness again. Sensor mode Press "Auto" button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off. Reset function Press "Reset" button, all settings go back to factory default settings. Factory default settings Sensitivity=100% Daylight sensor=disable Hold time=90s Twilight time=5min Twilight level=10% Ambient learn Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance. Test mode "Test mode" is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button. Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly. *Test mode defaulted settings Daylight sensor=disable Hold time=3s Twilight time=N/A Twilight level=N/A In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off). -
