Flexographic solvent based inks
Rupa colour ink's flexographic solvent based inks has got a wide range of products for various applications
1.Flexipoly
2.Flexisack bond
3.Flexipulp
4.Flexiglassine
5.Flexiopaque
6.Flexianchorplast
7.Flexialkylfix
8.Woven sacks inks
And 9. Two pack inks for hard to bind substrates as per customer's specicification
Product Introduction
1. It is an acrylic polymer mixtures paste which is easy to get thickness with good fastness.
2. It is good operability without screen blocking and has strong 3D effect.
3. Soft with good elastic. Suggest applying for cotton fabrics or cotton blends.
Application
1. Suggest using 43T-47T mesh.
2. It is better to get quick thickness with using thick screen. Normally pls using HD Clear for base printing with 6-8 times then prints color for 2-3 times.
3.Pls remember to do curing at temperature at temperature 160 for 2 minutes and put for natural drying 24 hours before doing the wash testing.
Product Storage
1. In original containers Well-closed. 5 (41 )~40 (104 )
2. Storage time 12 months
Specifications
Binder for pigment printing
Ingredient:acrylic acid polymer
Physicochemical properties:
Appearance:white slightly blue light emulsion
Ion:anionic/nonionic
PH value:7-8.
Characteristics
1. Eco friendly thickener for aqueous printing
2. Strong water cohesive and thickening ability
3. High concentration, small dosage, no influence to handle, good color yield, sharp definition.
4. To enhance colour depth in loop ager for disperse prints.
5. Tested by independent testing centers (SGS) in China.
6. Available to be used in cotton cloth, T/C cloth, nylon, special fibers and pass 110-120 degrees of heat treatment after finishing printing.
Usage
self-crosslinking type of binder,good compatibility with various pigments,preparation of paste,no fouling or clogging,good stability,directly mixed with pigment and thickener to prepare paste.Low formaldehyde content,can meet the requirements for export,application to pigment printing of various fiber fabrics.
Application methods
mixed with pigment,thickener and water for paste with stirring,adding some crosslinker(10-15% ratio to binder) will obtain better results,printing,drying and curing at 150¡ãC for 3 mimutes or 170-180¡ãC for 30 seconds.If dosage of pigment is 5-8%,adding 10-20% binder,for printing special dark color,increase the binder dosage.
Package and storage:200kg plastic drum,sealed at cool,dry place,validity for 6 months.
