1. High-quality heat source
Under common-pressure liquid, the oil transfer heating system can output hot oil of maximum 350 celsius degree for the heat user; our heat-conducting oil heating systems applied the fuji temperature control instrument and the intelligent self-tuning temperature control technology. The control precision is about ía 1 celsius degree and accurately control in the range of the used temperature; the main power for the heating used the solid-state modules non-contact switch circuit in order to adapt to the frequent switching and have no interference to the power supply. Dry combustion can also be avoided. The hot oil cooling system can be designed according to the end user requirement, so that it can satisfy the process requirement of rapid cooling after heating up;
2. To save energy and low operating costs
Heat-conducting oil heating system is the liquid phase closed cycle. The temperature difference between the output oil temperature and the return oil temperature is 20-30 celsius degree, that is only to heat a temperature difference of 20-30 celsius degree can the working temperature be reached. Meanwhile, no water treatment equipment is required for this device. No lose of steam running, steam reeking, steam dropping and steam leakage as the steam boiler. The utilization ratio of heat is very high. It can save about 30% energy compared with the steam boiler.
3. Low equipment investment
Due to the reason that the system of the heat-conducting is simple, no water treatment equipment and more auxiliary equipment , low pressure bore by the boilers etc., the investment for the whole system is comparatively low;
4. Safety
Because the system only withstands the pump pressure and there is no explosion risk for the heat conduction oil heating system, it is more secured;
5. Environmental protection
The environmental effect of the organic heat carrier heating system is mainly reflected in the minimal fume emissions, no sewage pollution and no thermal pollution;
Vacuum hot press furnace is widely used for all kinds of composite materials, high conduct thermal material, SiC/Si3N4/B4C ceramic materials, copper base iron power materials, iron base materials, iron-copper base power materials shaping, densification. And the max sintering temperature can be 2500°C, such as the iron-copper base brake disc of the plane, bullet train brake-shoe, armor, armored car backplane, bullet against armor of the helicopter.
1. High-quality heat source Under common-pressure liquid, the oil transfer heating system can output hot oil of maximum 350 fª for the heat user; Our heat-conducting oil heating systems applied the Fuji temperature control instrument and the intelligent self-tuning temperature control technology. The control precision is about f+ 1 fª and accurately control in the range of the used temperature; the main power for the heating used the solid-state modules non-contact switch circuit in order to adapt to the frequent switching and have no interference to the power supply. Dry combustion can also be avoided. The hot oil cooling system can be designed according to the end userf+s requirement, so that it can satisfy the process requirement of rapid cooling after heating up; 2. To save energy and low operating costs Heat-conducting oil heating system is the liquid phase closed cycle. The temperature difference between the output oil temperature and the return oil temperature is 20-30 fª, that is only to heat a temperature difference of 20-30 fª can the working temperature be reached. Meanwhile, no water treatment equipment is required for this device. No lose of steam runningf= steam reekingf=steam dropping and steam leakage as the steam boiler. The utilization ratio of heat is very high. It can save about 30% energy compared with the steam boiler. 3. Low Equipment Investment Due to the reason that the system of the heat-conducting is simplef=no water treatment equipment and more auxiliary equipmentf=low pressure bore by the boilers etc., the investment for the whole system is comparatively low; 4. Safety Because the system only withstands the pump pressure and there is no explosion risk for the heat conduction oil heating system, it is more secured; 5. Environmental Protection The environmental effect of the organic heat carrier heating system is mainly reflected in the minimal fume emissions, no sewage pollution and no thermal pollution; 6. Widely Application It can be applied in the following areas: by high-temperature shapingf= plate heatingf= rubberf= dryingf= dyeing and printingf= chemical industryf= plywood productionf=rolled water-proof material productionf= asphalt heatingf=non-woven hot-rolled machine, fiber glass press machinef= reaction kettlef= mould f=drying roomf= oven and other heating required industries. In wooden cases
1. High-quality heat source Under common-pressure liquid, the oil transfer heating system can output hot oil of maximum 350 celsius degree for the heat user; our heat-conducting oil heating systems applied the fuji temperature control instrument and the intelligent self-tuning temperature control technology. The control precision is about ía 1 celsius degree and accurately control in the range of the used temperature; the main power for the heating used the solid-state modules non-contact switch circuit in order to adapt to the frequent switching and have no interference to the power supply. Dry combustion can also be avoided. The hot oil cooling system can be designed according to the end user requirement, so that it can satisfy the process requirement of rapid cooling after heating up; 2. To save energy and low operating costs Heat-conducting oil heating system is the liquid phase closed cycle. The temperature difference between the output oil temperature and the return oil temperature is 20-30 celsius degree, that is only to heat a temperature difference of 20-30 celsius degree can the working temperature be reached. Meanwhile, no water treatment equipment is required for this device. No lose of steam running, steam reeking, steam dropping and steam leakage as the steam boiler. The utilization ratio of heat is very high. It can save about 30% energy compared with the steam boiler. 3. Low equipment investment Due to the reason that the system of the heat-conducting is simple, no water treatment equipment and more auxiliary equipment , low pressure bore by the boilers etc., the investment for the whole system is comparatively low; 4. Safety Because the system only withstands the pump pressure and there is no explosion risk for the heat conduction oil heating system, it is more secured; 5. Environmental protection The environmental effect of the organic heat carrier heating system is mainly reflected in the minimal fume emissions, no sewage pollution and no thermal pollution;
Vacuum cleaning furnace was used for cleaning the ordinary spinning plates, abnormal shaped spinneret plate, fine denier board, component housing for the terylene, polypropylene fiber, non-woven fabrics etc. Of the chemical fiber cleaning industry. It can also be used for washing the filter elements. It applied the principle that the synthetic polymer decomposed under the condition that isolating from the air in the vacuum state and the high temperature around 500 celsius degree. It owns the advantages of little environmental pollution, perfect cleaning of the spinning board, smoothed nozzle hole, extension the life of the spinneret board as well as shorter working hours, energy saving, easy to operate, good washing effect and high degree of automation etc. It is the updated products for replacing the triethylene glycol cleaning furnace and salt-bath furnace. Vacuum cleaning furnace is also applicable to the cleaning of the die-head and filter elements in the plastic industry.
It is used for HIP and rapid cooling gas quench treatment of various metal, copper base, iron base powder, friction resistant material ceramic material and etc.
Supplier: Heat transfer oil boiler, oil furnace, electric heat conducting oil furnace, vacuum cleaning furnace, vacuum calcinations furnace, oil-transfer heating circulation system, temperature control unit for conducting oil, hot press oil furnace
1.Product Introduction Furnace front manipulator is applied in the intermediate frequency induction furnace steelmaking workshop of the steel plant and is installed between the two furnace shells. It can easily compact the large volume of steel scrap or too loose light material when feeding, which makes the volume of steel scrap shrink rapidly and the compactness increases, thus improving the energy conversion and greatly improving the smelting efficiency of induction furnace. At the same time can quickly, flexible induction furnace around the scrap and packaging block sweep into the furnace. with remote control operation to keep the operator away from the furnace opening area and reduce the hidden danger of safety. 2. Main functions 1) a large volume of scrap steel or too loose and lightweight material that can be easily compressed into the material. 2) The volume of scrap is reduced rapidly and the compactness is increased; thus, the energy conversion is improved greatly Melting efficiency. 3) can quickly and flexibly sweep the scrap and packing blocks around the induction furnace into the furnace body, and solve the manual many, low efficiency, unsafe operation problems. 4) Instead of the original manual operation, it solves the high intensity labor under the high temperature environment (about 1500�°C temperature radiation), and realizes the remote control operation, which greatly reduces the casualties of the workers. 5) Rapid pressure reduction, so that the furnace phosphorus is not easy to produce high temperature, reduce the corrosion of quartz sand, greatly lift high furnace refractory life. 3. Advantages: the equipment has high quality and high reliability, stable and continuous operation. (1) The whole mechanism uses the hydraulic cylinder to drive the telescopic, lifting and rotating functions of the manipulator, the driving force is large and the operation is stable. (2) The front and end lever of the inner beam is designed as a fast-mounted structure, which can be replaced quickly. (3) The hydraulic components are concentrated in the rear of the equipment, which can keep away from the heat source and increase the reliability of the operation of the equipment. (4) Use local and remote control (remote control) two control mode, and can switch freely. Remote control operation can be free to shut down and emergency power cut off. (5) The equipment is small in size and takes up less space. 4.The equipment includes: manipulator body, hydraulic system, electric control system.
We have stock of 400 MT Furnace Oil for sale
Main technical parameter Gas utilized: natural gas, oil, water gas Material: base rack, chain rack and chain runway adopted 12# standard channel steel. Furnace frame adopted 40*60 square pipes. Base plate adopted 3mm hot plate. side plate adopted 2mm cold plate. Fireproof and heat preservation material: bottom brick is adopted with light soaking brick; surface brick and furnace hearth are adopted with aluminum fireproof brick; soaking cotton is adopted with fiber silicon cotton.
