The most powerful commercial condensing boiler in the world, the E-Compact Twist is available in a wide range of outputs of 25kW up to 150kW, and is ideal for business owners who are looking to run a more energy-efficient business. The only condensing pellet boiler in the world with a single heat exchanger, the E-Compact Twist condensing boiler can achieve efficiencies of up to 103%.
Condenser is a heat exchanger installed in steam-electric power stations to condense turbine exhaust steam into water. There are 2 kinds of condensers: the air-cooled condenser and the water-cooled condenser.
We could manufacture and reform the condenser according to the customer requirement.
Product introduction
The plate condenser consists of plates that are welded together in pairs to form a so-called plate set. The concept of a plate set leads to two different types of channels: a weld channel for condensing steam and a gasket seal channel for cooling water. This type of plate is specially designed for optimum condensation. It has an asymmetrical arrangement with a large gap on the steam side and a small gap on the cooling water side. This makes it possible to maintain a very low pressure drop at the steam end while maintaining a certain speed and turbulence on the cooling water side. This maximizes heat transfer efficiency and minimizes fouling.
Plate condensers are specially developed for condensing steam under low pressure or vacuum conditions in evaporation and distillation systems. It can meet a variety of specific applications and capabilities requirements. The steam inlet fitting is large and the two condensate outlets are small. The cooling water fitting is a medium size and is located in the center of the plate.
Maximum heat transfer area: 500m2/set; Maximum design pressure:16bar
Maximum temperature:200 celsius degree; Nozzle diameter:DN50~DN700
Features
Plate condenser
Lower cost
Due to the high heat transfer efficiency, this means less heat exchange area and higher cost efficiency than conventional shell and tube type, especially when stainless steel or titanium is required. The compact design also saves space, thus reducing transportation and installation costs.
Plate condenser
Less fouling
Due to the high strength turbulence created by the specially designed corrugated sheets, there is less fouling on the cooling water side than the shell and tube condenser.
Plate condenser
Easy to clean
The cooling water side is easy to clean, whether in the way of mechanical or chemical.
Plate condenser
Easy to expand
Just add an extra "plate group" in the existing frame.
Plate condenser
Complete counterflow
A greater degree of subcooling of non-condensable gases can be achieved compared to shell and tube equipment. Therefore, the load of the vacuum pump will be reduced.
Range of application
Alumina, food industry, sugar industry, beverage industry, industrial wastewater, etc.
Used to collect dirt and moisture which might impair the performance of instruments.
Available in 3" & 4". Pipe schedules are available in S-40, 80, 160, XXS
With IBR certifications also.(Optional)
MOC : SS 304,SS 316, ALLOY STEEL, CARBON STEEL.
Product Description
Condenser is commonly used for the opening flow. Use blower and card pipe transmitting raw cotton or chemical fiber and the original cotton is condensed at the surface of dust cage with the suction of the blower and then stripped from it by beater, and go through the trash extraction of dust cage.
Rich specifications for selection. Different power for different position in the flow. There are bypass devices at the top of this condenser and the raw cotton can be straightly transmitted to the next platform through this path.
Technical Specifications
Production kg/h: 800
Dust cage diameter mm: 500
Beater type: 6-Wing
Blower diameter mm: 500
Blowing rate: Around 4500
General Power Kw: 4
Size (LxWxH) mm: 1721x800x1000
Machine weight kg: 600
