MZ series isolation terminals ars applicable to non-explosion proof during the industrial automation and process control, they are used to connect between on-site meters and control rooms, in an attempt to collection, detection, isolation, transmission, distribution and convertion. The applicaion of isolators aim to improve the anti-interference capabilities of automatic control systems of industrial manufacture process, to protect device and enhance the stability and reliability of the systems.
MZ series adopt new modular design, which features super-thin shell, small volume, low power comsumption, high conversion accuracy and anti-interference. They can be combined with other units and DCS, PLC systems etc. In the fields of oil, chemical,power, steel, machinery, metallurgy and light industry.
6.2mm super-thin structure,unified shell dimension.
Modular design,small volume,low power comsumption and high conversion accuracy.
Isolation among input, output and power.
Standard DIN rail mounting.
Stable time: 3~5m.
CE certified.
TM 6000 series is a kind of electrical interface equipment developed by our company which is applicable for non-explosion-proof areas and can be used to connect site instruments and control room. Through reliable power-input-output isolation, it can resolve the site interference of auto-control system and make sure the stability and reliability of the system. TM 6000 series, including many models selectable, can satisfy the need of signal isolation, distribution, transformation, allocation and alarm driving in the auto-control system.
PROTOCONTROL offers Signal Isolators to isolate and convert field signals like resistance, current, voltage, frequency to 4-20 mA. These isolators find use in process control industries for signal isolation. Variety of models is available for specific applications. Transmitters are the field devices which receives signal from field sensors like temperature sensor (Pt 100, thermocouple) or load cell & convert these in suitable form like 4-20mA, O-20 mA, 0-10V as an input for panel instruments. In the field, many signals are generated such as motor current, armature voltage, position feedback in the form of change in resistance or signals obtained from various types of traducers in standard voltage or current form. These signals are not isolated from input and not suitable for transmission over long distance. Converters are specially developed to overcome these problems in transmission such as line drop, interference, ground looping, and non compatibility to standard processing unit. Salient features includes complete galvanic isolation between input output and control supply , Independent zero and span adjustments ,Stable current output eliminates need for special cable, shielding, The isolators are housed in din rail mounting engineering plastic enclosure. Special robust cast Al. enclosures suitable for field mounting are also available. These Isolators are extensively used in cement, fertiliser, chemical, and processing plants. Individual packing.
Model Number: UIYDX148310A151T160NF Frequency Range: TX:151.06~154.125MHz RX:158.765~160.09MHz Insertion Loss:1.0dB Ripple: 0.6dB Isolation:65dB VSWR:1.35 Power:50W Connector Type: N-F
Supplier: float switch, liquid level sensor, water level controller, coil heaters, cartridge heater, band heater, flow switch, pressure switch, foot switch,etc electric products
Blue Jay Technology offers the industry's best selection of isolators. Dozens of models are now available to meet your needs. Select from single and dual-channel models with AC, DC, or loop-powered operation. Signal splitters deliver dual outputs from a single source. And whether you need a unit that sinks or sources current, Blue Jay has the right solution for you. Optical or galvanic isolation eliminate ground loop errors, reduce noise, and block high voltage transient surges. Our multi-channel modules reduce costs and save space. Models with push-button calibration simplify installation and maintenance tasks. Units with mini USB port preset for 4-20mA input/output required. Features ·Support universal Input Signal ·Provide 26...18VDC input loop power ·TC/RTD sensor broken alarm ·Low Temp. drift. Auto zero calibrating ·Loop Power current limitation protection (30mA) ·Over-current protection for input current (50mA) ·Current output can be set inverse proportional output ·Programmed by USB or adaptor ·w/o external power supply ·Back board designed with redundant power-supply interfaces
IOMS system is a special design isolated signal remote I/O system, it linked a local area network designed to connect controllers to remote I/O chassis and replacement of discrete wirings by fieldbus or industrial Ethernet communication. MIOS supports up to 31 slots with as many as 128 I/O points in each system. If you need more, you can expand your system with Ethernet router, easily support thousands of I/O points in a single system FEATURES Support universal Input Signal Local area network designed for factory-floor applications Connects controllers to remote I/O chassis and other intelligent devices Channel to channel isolated Remote I/O Built-In Web Server Dual Channel , Power Hot Swap Supported Support Multi Communication Protocols Flexibly Configuration With Sorts of Full Isolated I/O models MWG1 main module support up to 31units I/O modules Back board designed with redundant power-supply interfaces
Inverter Grade Thyristors (Capsule Type) INSEL Rectifiers India Thyristors may also be necessary to act in the opening switch mode as well. Such applications may contain those where voltage is reapplied to the pulse power switch shortly after closing and the switch needs to have improved blocking capability or the transfer energy needs to be controlled. In these applications, the switch needs to have turn-off capability to decrease the natural turn-off time (tq) of the device. The device is operated in GTO mode with the suitable commutating gate drive. Thyristors may be used to bond a source of stored energy, such as a capacitor to a load, or to bypass and protect the load in the case of a crowbar circuit. In these pulsed power applications where the rate of rise of current is very fast, the pulse power switch is acting as a closing switch and ordinary phase control thyristors (SCRS) are probable to fail due to the high di/dt experienced? Thyristors or SCRs (silicon controlled rectifiers). The Phase Control SCR provides phase-control of ac signals with a line frequency of 50-60 Hz. The Inverter SCR is used in pulsed power applications connecting higher frequencies. The main difference between the two families is the turn-off time (tq). Inverter SCRs typically have a tq of less than 30 microseconds (�µs). Similar phase control SCRs has tq ratings of several hundred �µs. Explore Inverter Grade Thyristors at Insel Rectifiers Welcome to Insel Rectifiersâ?? your go-to source for cutting-edge power solutions. Delve into the world of innovation and explore our exceptional range of inverter-grade thyristors, highlighted by the advanced Capsule Inverter Thyristor series. Unleashing Power Precision At Insel Rectifiers, we take great pride in offering unmatched solutions tailored for modern power systems. Our inverter-grade thyristors, particularly the revolutionary Capsule Inverter Thyristor series, have been intricately engineered to redefine the dynamics of power control in the constantly evolving technological landscape. Efficiency Redefined Our Capsule Inverter Thyristors boasts advanced technology and a state-of-the-art design that ensures optimal performance in every application. The unique capsule design goes beyond enhancing efficiency; it significantly contributes to the overall reliability of these thyristors. Industries seeking reliable and efficient power control solutions find our Inverter Grade Thyristors to be the preferred choice.
Blue Jay Technology offers the industry's best selection of isolators. Dozens of models are now available to meet your needs. Select from single and dual-channel models with AC, DC, or loop-powered operation. Signal splitters deliver dual outputs from a single source. And whether you need a unit that sinks or sources current, Blue Jay has the right solution for you. Optical or galvanic isolation eliminate ground loop errors, reduce noise, and block high voltage transient surges. Our multi-channel modules reduce costs and save space. Models with push-button calibration simplify installation and maintenance tasks. Units with mini USB port preset for 4-20mA input/output required. Features ·Support universal Input Signal ·Provide 26...18VDC input loop power ·TC/RTD sensor broken alarm ·Low Temp. drift. Auto zero calibrating ·Loop Power current limitation protection (30mA) ·Over-current protection for input current (50mA) ·Current output can be set inverse proportional output ·Programmed by USB or adaptor ·w/o external power supply ·Back board designed with redundant power-supply interfaces
Features: >> One input two output >> Accuracy: 0.1%, 0.2% >> Isolation : signal input / output / auxiliary power 3000VDC >> One standard signal input: 0-5V / 0-10V/1-5V, 0-10mA / 0-20mA/4-20mA >> Two standard output signal: 0-5V / 0-10V/1-5V, 0-10mA / 0-20mA/4-20mA >> Dimensions: 106.7x79.0x25.0mm >> Auxiliary power supply: DC5V(± 10%), 12V,15V, 24V(8-32VDC) >> Insulation resistance :â?¥ 20MΩ >> Operating Temperature : -25 to +80 ° C >> Pressure : signal input / output / auxiliary power >> Operating Humidity :10 ~ 90% (no condensation) >> Storage Temperature :-45 ~ +80 â?? >> Impulse withstand voltage : 3KV, 1.2/50us (peak value) >> Storage humidity :10 ~ 95% (no condensation) WAYJUN this product uses advanced isolated technology, quarantine inspection / monitoring DC voltage signal, small size,low power,high accuracy. Input/output/auxiliary power supply three isolation.Widely used in such fields as electricity, chemicals, petroleum, industrial and automatic control. Selection Guide: Samples: 1.Input:0-5V Power Supply:24V Output:two 4-20mA Type No.: DIN12 IAP- V1-P1-A4 2.Input:0-10V Power Supply:24V Output:0-10V/4-20mA Type No.: DIN12 IAP-V2-P1-V2A4 3.Input:4-20mA Power Supply:24V Output:two 4-20mA Type No.: DIN12 IAP- A4-P1-A4 4.Input:0-10V Power Supply:24V Output:two 0-10V Type No.: DIN12 IAP V2-P1-V2
