Glue Machine

Product Description Gluer Machine Applicable Paper Width: 1,400-2,300 mm Configuration: 1. The designed maximum operating speed is 220 m/min; 2. The glue roller and meter roller adopt modular and built-in design, they can be installed and removed from the operation side to facilitate repair and maintenance; 3. A pressure arm locking mechanism is provided to ensure stable and reliable operation performance of paper pressing roller (touch pressing plate) under high-speed operation state; 4. The gap between the glue roller and the meter roller can be automatically adjusted according to the speed, paper material and flute type; 5. The touch pressing mechanism for glue application is a paper pressing roller, and the gap between the paper pressing roller and the glue roller can be adjusted electrically to facilitate rapid changeover for processing cardboards with different flute types; 6. The glue pan is lifted pneumatically to facilitate cleaning. There are glue blocking plates installed at both ends of the glue pan to well prevent glue from splashing from the shaft ends during high-speed operation of the glue roller and meter roller;

Capacity: 5-2000l Material: stainless steel SUS304 or SUS316L Stirrer speed:0-120rpm Homogenizer speed: 0-2900rpm. Wooden box.

Semi-automatic high speed hot melt glue box packing machine Main parameter Lbd-110 semi-automatic high speed hot melt glue box packing machine Power220v/50h Pressure0.4mpa Total power2.4kw Range of packing size, l*w*h(80-300)*(40-200)*, 15-150, mm Speed90-110 boxes/min Working temperature180-200â°c Glue tank capacity1.5kg The machine size, l*w*h 3200*800*1500mm Weight 200kg Introduction (easy operation ) Lbd-lbd-rt1011-2 semi-automatic hot melt glue box packing machine with air cleaner is suitable for all cartons which need hot glue on both sides, such as coffee, curry, biscuits, tissues and soap.After manual loading, place the box on the conveyor belt, automatic transportation, glue and sealing box. Main features 1. Plc operate machine, which can save a lot of time.No experience will be used. 2. Processing capacity 90-110 boxes/min.With equal time and labor, productivity can be increased by 3-5 times. 3. Glue on the point, not brushed, not spillage.Compared with the manual sealing box, the amount of glue used is reduced by 2/3. 4. Conveyor belt, sealing box square, not deformation, not card paper, lower production cost. 5. The fuselage is made of aluminum alloy, not rusty and easy to maintain. 6. The bottom is equipped with pulleys, which can be moved at any time convenient for use. Applications Coffee boxes , curry boxes , biscuits boxes , tissues boxes soap boxes , etc. . All automatic transportation, automatic glue and automatic sealing box.

Vinyil asetat acrilic ester copolymer used in automatic selefan machine as lamination glue .

Sealing glue tube filling machine, type: filling machine. Condition: new. Application: apparel, beverage, chemical, commodity, food, machinery & hardware, medical, textiles. Packaging type: bags, barrel, bottles, cans, capsule, cartons, case, pouch, stand-up pouch. Packaging material: plastic. Voltage: 220v/380v, 220v 50hz 1 phase. Power: model specific, 0.75kw. Model number: c17-3t-t3. After-sales service provided: engineers available to service machinery overseas. Filling volume: 5 to 100ml. Filling capacity: 30 to 40bph. Filling precision: 0 to 1%. Oem: available. Odm: available. Response time: within 24hrs, semi-auto & automatic tube filling and sealing machine supplier, factory

Model psx-400 Technical parameter 1.Capacity, 24000bph.(500ml). 2.Bottle material, pet, glass, metal, pe, hdpe. 3.Label roll inner diameter, 6 inches (152 mm). 4.Bottle diameter, 30-200 mm. 5.Bottle height, 100-500 mm. 6.Label height, 10-250 mm. 7.Power, ac 3, 380v/50hz. 8.Air consumption, 3-6 kg/cm 9.Power consumption, 16 kw. 10.Main machine size: 2200l*2500w*2000h(mm). Features: 1.Auto cutting and sticking circle or half circle of bottle. Auto melting and attaching glue on top and rear of the label , glue auto recycling . 2.Variable speed control system, synchronous automatic detection system, automatic adjust production speed, always make the labeling machine at best production speed 3.Star wheel separation and feeding , correlation design transmission mode high-speed labeling, stable precision. 4.Servo motor synchronous tracking, with special designed vacuum drum adsorption, labeling precise and stable 5.Abnormal situation, this machine has safety device, automatic stop immediately. 6.Following conditions the machine will automatically stop and alarm: (1) label is not labeled on bottles (2)label sticker failure (3)label is about to run out (4)abnormal bottle feeding (5)abnormal bottle out (6)abnormal bottle jam 7.The whole machine centralized lubrication system, easy to clean, lubrication and maintenance. 8.Techmach electronic automatic rectify guide system, digital electronic eye for ultrasound method.Non-contact electric eye, automatically adjust the label location. (optional). 9. Label top and end difference within 2mm ( without techmach), 1mmwith techmach

Model XH-PUR-2-2000 Standard width 1800mm(customized) Production speed 0-40m/min Rated power 4500W Cross weight 4600KG Machine size L*W*H:4200mm*5000mm*2300mm Pressure 8MPa/cm2 Supply voltage Three-phase four-wire 380V/220V Standard equipment laminating machine,oil heater,collosol machine Sol mode Automatic Operation system Intelligent control by Man-machine Interface Operation 2 people Cross weight 4600KG Machine size L*W*H:4200mm*5000mm*2300mm

1:this device adopted import PLC,the complete machine realizes machine electric integration autocontrol.From the manipulator divide labels advance,enter the pot,taking label,spread glue,paste the label,divide cutting to enter pot,enhance the production efficiency greatly.enter paper take label adopted the most advanced feida facilities,make the label high-accuracy location;solve the double pieces problem fundamentally. 2:rise and down the large capacity label storeroom automatically,adopted import shift sensor that control material level accurately,label store volume maximum can reached 2500 pieces 3:the module model quick replacement mold head,make the device replace mold only need 10 minutes. 4:automatic circulate type rubber supply pump,glue store volume can reached 20KG,the device can working 30 hours continuous no need add rubber liquid,when the end of operation the CIP clean system automatically and make the device filled with water and finish cleaning automatically under the circumstance of no need to dismantle the rubber box. 5:principal axis transducer speed mix,can adjust speed watonly itself according to potí»s diameter. 6:operating board equipped with function choice key,the operator can switchover the function among of paste label and pipe cutting,also can paste label and cut pipe at the same time. Main technical parameter: Applicable pot type: 80mm-200mm Applicable label height: 50mm-400mm(after divide cutting) Label precision: +/-0.5mm Production efficiency:2000pot/hours(caculate by divide cut 4 pots one time) Total power:1.5 KW Presure:0.5 Mpa Machine weight:850KG.

Main characteristic: 1. An ac converter control is used for both speed and quantity of glue feeding for which both automatic synchronous tracking and manual control are available. 2. Jyt-b hot melt coating machine adopts intelligent pid temperature control system, it can control the temperature exactly and the error is with in 1 3. The glue melting oven is coated with the antisticking layer, efficacious prevent the hot melt adhesive against carbonization. 4. Collocate the precision metric gear, make it more steady to produce the adhesive. 5. The high precision of alloy steel spray head has guaranteed high-quality coating result. 6. High-efficiency cooling device insure the applicable range of the basic materials. Range of application: This hot melt coating machine is suitable for producing double-side tapes, duct tapes , double-side sponge adhesive tape, clean adhesive tape, masking adhesive tape, alu. Foil tapes, fabric tapes, shoes materials and medicine dressing tapes. Etc. Techinical parametersú¦ Model jyt-b Coating width 400-2500mm Coating weigh 10-200g/¬o Coating speed 50m/min Unwind diameter 1000mm Rewind diameter 700mm Correction device 1sets Length 4800mm Height 1350mm Wooden case