Product Description
Gluer Machine Applicable Paper Width: 1,400-2,300 mm
Configuration:
1. The designed maximum operating speed is 220 m/min;
2. The glue roller and meter roller adopt modular and built-in design, they can be installed and removed from the operation side to facilitate repair and maintenance;
3. A pressure arm locking mechanism is provided to ensure stable and reliable operation performance of paper pressing roller (touch pressing plate) under high-speed operation state;
4. The gap between the glue roller and the meter roller can be automatically adjusted according to the speed, paper material and flute type;
5. The touch pressing mechanism for glue application is a paper pressing roller, and the gap between the paper pressing roller and the glue roller can be adjusted electrically to facilitate rapid changeover for processing cardboards with different flute types;
6. The glue pan is lifted pneumatically to facilitate cleaning. There are glue blocking plates installed at both ends of the glue pan to well prevent glue from splashing from the shaft ends during high-speed operation of the glue roller and meter roller;
* Separate motor drive, frequency conversion control. * Glue roller surface is treated by special mesh snicked and chromeplated. Glue gelatinizing roller and pressed roller is exactitude milled and chrome plated. * Pneumatic control the dual paper pressed roller system, smart and convenient. * Auto-cyc feeding glue, prevent glue liquid from depositing. * Matched warm-up set, this will speedup glue liquid burnted.
Product Description Gluer Machine Applicable Paper Width: 1,400-2,300 mm Configuration: 1. The designed maximum operating speed is 220 m/min; 2. The glue roller and meter roller adopt modular and built-in design, they can be installed and removed from the operation side to facilitate repair and maintenance; 3. A pressure arm locking mechanism is provided to ensure stable and reliable operation performance of paper pressing roller (touch pressing plate) under high-speed operation state; 4. The gap between the glue roller and the meter roller can be automatically adjusted according to the speed, paper material and flute type; 5. The touch pressing mechanism for glue application is a paper pressing roller, and the gap between the paper pressing roller and the glue roller can be adjusted electrically to facilitate rapid changeover for processing cardboards with different flute types; 6. The glue pan is lifted pneumatically to facilitate cleaning. There are glue blocking plates installed at both ends of the glue pan to well prevent glue from splashing from the shaft ends during high-speed operation of the glue roller and meter roller; 7. Layered independent frequency conversion motor, synchronous belt transmission and relatively independent control are used in the power part to ensure the precision of transmission and to greatly reduce the vibration and noise during operation; 8. Layered independent adjustment and touch panel man-machine interface control are employed, so the adjustment and control are more flexible and directviewing; 9. The floating roller of the pre-heating cylinder is electrically adjustable (this function is optional to users) to facilitate paper passing through and adjustment of angle of contact. GLD6A glue applying machine for 2-layer corrugated cardboard. Paper Width External Dimensions Weight (T) Whole Machine Power
this machine can be used in Filter, cabinet, lighting, battery, etc. Gluer for project of vehicle water drop channel Major components of the equipment: six-axial robot, double-component polyurethane precision glue supply system, precision double-component gluing head, left-right alternative gluing platform, AB glue automatic feeding system, tool and control system, etc. Automatic loader and unloaded devices are allowed as required by client in order to satisfy with individual demands.
Additional configurations / functions list (these are options base on materials and production requirements with additional cost) 1:Available in touch screen operation 2:Available in 10, 30, 60 liters tanksâ?? sizes (customize is welcome with additional cost) 3:Available in Dynamic or Static valve (depends on materials) 4:Agitate motor (tank stir) 5:Tank heating jacket (Silicone heater with auto regulator) 6:Heating hoses (depends on materials) 7:Mixing valve and mixing nozzle automatic flushing clean system 8:Pump pressure sensor (Monitoring the materialsâ?? pump pressure, in case if over or under pressure, it will stop and alarm to alert,optional function) 9:Mixer tube clogging sensor (for dynamic valve, monitoring the mixing tube in case if clogged, it will alarm in 1-3 sec. to alert optional function) 10:Pump sizes, available in 3cc, 8cc, 12cc, 24cc, and so onâ?¦ (it is determined by dosing speed, and volume) 11:Available in multiple dispensing valves or nozzles, such as 1, 2, 4, 6 12:Secondary pumps (e.g. when transit material from a larger pump to a second pump with very small volume required, it is determined by the dosing volume) 13:Pallet or fixture (depends on) 14:Machine additional safety protection (Moving robot cover, or safety light curtain) Epoxy resin potting example: Pouring products: safety capacitors; you can also view other product potting case videos Pouring process: Place the product on the neatly placed fixture, and perform three-axis linkage trajectory potting to automatically pot the neatly placed products;
Two component foam gasket machine For small size workpiece Foam gasket machine Application: Is mainly used for cabinets, distribution cabinets, explosion proof shell, low ark, automobiles, home appliances, lamps and lanterns, filters, etc. various sealing need products and parts.
Glue spreader is used for spreading glue Uniformly on veneers. Uniform gluing with the exact figure of adhesives improves the quality of plywood and saves a huge amount of expense in the long run. The clearance between the glue rolls and the doctor roll, in which a stepless change in rotation is available, can be freely adjusted according to the viscosity and the amount of glue to be spread. The waste scrapes the glue roll. When it inserts to the clearance either between the glue rolls; or between the glue roll and the doctor roll, the rolls are separate quickly by air cylinder. So, the wastefall down and cannot scrape the glue roll. This Machine has VFD (Vector Frequency Drive). It can control stability of the running motor and the horse power of the output. At the operation the exchanged velocity, it can adjust easily the needed gluing velocity according to the actual gluing situation. (Nonstep speed change).Besides, this machine is specially equipped with an emergency stop switch which can immediately stop the running machine in emergency conditions. The operator can activate the emergency stop switch within a very short time to ensure the safety of the operator. Main Rubber Rolls 400 mm Dia x 2700 mm Length x 2 Sets Doctor Rolls 250 mm Dia x 2700 mm Length x 2 Sets Clearance Between Rubber Rolls 0 70 by handle. Adjustment of Doctor Rolls One Touch Controlled by Pneumatic System & Fine adjustment by handle with revolution indicator. Motor for Outfeed Conveyor 0.75 Kw (1 H.P.) with VFD. Motor for Main Roller Drives 7.5 Kw (10 H.P.) with VFD & Imported Gearbox.
Capacity: 5-2000l Material: stainless steel SUS304 or SUS316L Stirrer speed:0-120rpm Homogenizer speed: 0-2900rpm. Wooden box.
Model mpc-jb Drive shift motor driven Bottle diameter 55-110mm Bottle height 60-450mm Labeling speed 40-130pcs/min Label size width: 20-200mm length: 80-370mm Precision ía1mm Subject roundness and verticalit of the bottle Machine size 2400*824*1100mm Weight 750kg Power ac 220/380v 50/60hz 750w
Brief Introduction : Shenzhen XHL Industrial Development Co., Ltd is professional in researching and manufacturing high quality glue dispenser machine , glue potting machine ,glue mixing machine ,LED silicon Strip extrusion machine , automatic Robert screw locking machine and automatic soldering machine etc automatic equipment. The products are using for LED , Widely used in arts and crafts (stickers, patches, trademark paper, cartoon paper, label, photo album), digital electronics, LED waterproof power supply, smart card signage, IC card, trademark, logo label (circuit board, PCB), clothing accessories and so on . Our glue machine can Suitable for all kinds of two-component glue, such as double-liquid glue, AB glue, silica gel, epoxy resin, PU glue . All of our machine can be acceptable customized with your required size and function. Service : Free testing , One year Warrantee ,and lifetime Service . Our machines can use for assembly production line .Welcome to ask for inquiry . Hope to cooperate with you sincerely . Product specification: xhl-314Z input voltage: 110v-220vac (internal switch) System: PLC program control mode: automatic cycle/pedal Internal voltage: DC24V motor speed: 10-250 RPM (adjustable) Power: 12W speed: 3-8 seconds/unit (depending on product size and length) Glue length: 0.5 -- 25 CM input pressure: 2---7 kg /CM Applicable screw diameter :M5 -- M30 output pressure: (adjustable) 0.1-- --5 kg/m2
