Supplier: Aluminium Casting, Dross, M. S. Scrap
Buyer: Aluminium Dross, Tense, M. S. Scraps200
Supplier: Remelted lead ingots, lead ingots, tin, copper, aluminum, brass ingots wire and sheets and other custom metal products
SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density. The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods. Chemical Composition: C:0.06 â?? 0.082% Mn:0.75 â?? 1.05% SI:0.13 â?? 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15%
We have years experience of aluminum alloy casting, since we need to produce the corrugated pipe molding blocks for our PE/PVC corrugated pipe extrusion line which is our another main business started from 1980's. and now we produce aluminum casting pieces according to customer's requests and drawings with the same superior quality as our mold blocks for our extrusion line. The weight of casting pieces can range from 0.25kg to 1200kg. 1 Metal liquid is shaped solidly by the effect of pressure, which can raise the fluid of the metal liquid and ensure a better shape of the casting piece. This casting method is benefit to shape casting pieces with require of clear silhouette and glabrous surface, especially suitable for the casting of large pieces of thin wall. 2 The casting pieces is formed in pressure, so the shrink spot on the pieces can be filled adequately by the metal liquid. As a result, the casting pieces are made with dense texture and high mechanical performance. 3 The technical parameter of the low pressure casting can be adjusted freely within the technical range,which can ensure an even and smooth metal shape and avoid the defect of the casting piece for the purpose of improving the quality of the casting pieces.
Supplier: Hms #1, steel turnings, p&s 5, manganese 12% and 15%, disk and drums , prepared cast iron scrap
Services: Fob, cif
Buyer: Hms #1, steel turnings, p&s 5, manganese 12% and 15%, disk and drums , prepared cast iron scrap
Aluminium is used extensively in the transport industry due to its high strength to weight ratio and its excellent impact absorption qualities. Western countries use an average of 140kg of aluminium per vehicle, whereas it stands at 40kg per vehicle in India. Hindalcoâ??s high-quality aluminium is preferred for its superior alloy composition and metallurgical properties that meet stringent performance parameters. Our expertise is backed by the superior Wagstaff AirSlip casting technology. From brakes to ignition, transmission to suspension, cooling and exhaust systems to windows and structurals, ornamentals to accessories, automobile heat exchangers and registration plates, Hindalco's superior aluminium material is for making the most precise automobile components. Hindalco brands: Maxloaderâ?¢ is an all-aluminium truck body made of extruded profiles from Hindalco. Maxloader truck bodies are lighter, more environment friendly and fuel efficient
Die locking force (KN) 1800 Size of moving platen(mm) 740X720 Diemeter of tie bar (mm) 85 Inner space between the bars(HV) (mm) 480X450 Die thickness(min-max) (mm) 200-650 Die stroke (mm) 350 Ejection stroke (mm) 80 Ejection force (KN) 100 Injection force (min-max) (KN) 140-220 Diameter of shot shot sleeve (mm) 50, 60, 70 Eceentric position of shot sleeve (mm) 0-140 Dosage of fluid metal per shot(AL) (kg) 2.0 Projecting area of casting(min-max) (cm2) 113-368 Injecting pressure(min-max) (Mpa) 49-15 Injecting stroke (mm) 360 Injecting speed (m/s) 10 Pressure build up time (ms)
We are specialized in making metal casting part based on customerí»s design and requirement with high class quality and good price. Description: OEM metal casting part Material: carbon steel, stainless steel, steel tube, steel rod, aluminium , brass, zinc alloy and etc. Process: stamping, bending, welding, casting, punching, maching. Surface: powder coating, zinc plated, nickel-chrome plated, painting, heat treatment and etc. Packing: packed in carton ,then on pallet. Our company can product all customer metal product, stamping part, deep drawing part, punching part, casting part. Weld wire mesh according to client's requirement. And all assembling part is welcome.
Die casting mold manufacturing, die casting mass production, post processing, surface treatment, OEM& ODM, operating under a standardized management system The industry we serve: Automotive components, Electronic component, Hardware components and Furniture components etc. Customers We Serve: VW, Faurecia, Bosch, Ford, Tata Motors, Horika-Tech, Audi, Bentley, Gold trip, Sonnplast, Sinit, Brose, V/S, Volvo, Magna, Hofman, Inno Cable, Takata, Cascade, SMR, Odelo, Rekuplast, GM, Werk SITZ, BMW, Mercedes-Benz.
