We have years experience of aluminum alloy casting, since we need to produce the corrugated pipe molding blocks for our PE/PVC corrugated pipe extrusion line which is our another main business started from 1980's. and now we produce aluminum casting pieces according to customer's requests and drawings with the same superior quality as our mold blocks for our extrusion line.
The weight of casting pieces can range from 0.25kg to 1200kg.
1 Metal liquid is shaped solidly by the effect of pressure, which can raise the fluid of the metal liquid and ensure a better shape of the casting piece. This casting method is benefit to shape casting pieces with require of clear silhouette and glabrous surface, especially suitable for the casting of large pieces of thin wall.
2 The casting pieces is formed in pressure, so the shrink spot on the pieces can be filled adequately by the metal liquid. As a result, the casting pieces are made with dense texture and high mechanical performance.
3 The technical parameter of the low pressure casting can be adjusted freely within the technical range,which can ensure an even and smooth metal shape and avoid the defect of the casting piece for the purpose of improving the quality of the casting pieces.
Cast aluminum-magnesium alloy Category:Aluminum alloy casting Cast Aluminum-magnesium alloy are widely used in the fields of electronics, automobiles, and aerospace. Common grades are 7A09 etc. The main elements of aluminum-magnesium alloy include aluminum and magnesium. The alloy products have high strength, low density and strong heat dissipation capacity, so they are popular in the fields of electronics, automobiles, and aerospace. Common grades are 5052, 5754, 5083, etc. Aluminum alloys have lower cost, superior performance and stronger product competitiveness. The density of aluminum-magnesium alloy is small, so it is lighter under the same volume, and has a certain strength, which can be used for load-bearing. Aluminum-magnesium alloy has strong heat dissipation, and at the same time, it can resist electromagnetic interference and has strong electromagnetic shielding. Its appearance has a certain degree of beauty, is resistant to corrosion, can maintain a good quality of appearance for a long time, and the material is environmentally friendly, and the waste is recyclable.
Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
Cobalt-chromium-molybdenum alloy (CoCrMo) is a kind of cobalt-based alloy, and is also a kind of Stellite alloy. It is a cobalt-based alloy that is resistant to wear and corrosion. The first cobalt-based alloy was a cobalt-chromium binary alloy, which was later developed into a cobalt-chromium-tungsten ternary composition, and then later did the cobalt-chromium-molybdenum alloy develop. Cobalt-chromium-molybdenum alloy is a kind of alloy with cobalt as the main component, containing a considerable amount of chromium, molybdenum and a small amount of nickel, carbon and other alloying elements, and occasionally also containing iron. DM FOR MORE IMFO
Supplier: Cast iron skulls, cast iron borings and turnings, steels skulls, eaf skulls, plate iron, mill scale, metal scrap, incinerated scrap (e46)
Low temperature alloy casting Category Titanium alloy casting Low temperature alloy casting can be used as an important material for the low-temperature structure of hydrogen-oxygen engines. Common grades are TC4 etc. Product Description Low temperature alloy casting can show stronger mechanical properties at low temperature.At present, it has been used in the field of liquid rocket engines, mainly as structural materials such as hydrogen storage tanks for hydrogen-oxygen engines, hydrogen pump impellers, etc., which greatly improves the comprehensive performance of liquid rocket engines. Low-temperature titanium alloys refer to titanium alloys that can work normally under low temperature conditions. They are generally divided into three categories, alpha titanium alloys, beta titanium alloys and alpha-beta titanium alloys. Typical low-temperature titanium alloy products are suitable for working at 253C as a storage container for liquid fuel, and some alloys have good low-temperature plasticity and fracture toughness. The strength of low-temperature titanium alloys can be increased as the temperature decreases, and the toughness remains basically unchanged, making it easy to weld. It has high specific strength, corrosion resistance and low thermal conductivity. It can not only be used as a storage container for low-temperature objects, but also can be used as low-temperature structural parts for the aerospace industry
Supplier: All type clothes, urea, all type agriculture and food items, all personal and entertainment items, all industrial and automotive items, all construction household and furnishing, all computers electronics and electrical, handicraft, items, npk, fertilizers t shirt, blanket,dry fruits, animal feeds, towel, bedsheets, toys, all grocery, copper wire scrap, copper ore concentrate, zinc ore concentrate, lead concentrate, fly ash, a4 paper, a3 paper, craft paper, occ, ldpe, hdpe , pvc resin, petroleum products, jp54, jet a1, crude oil, blco , biodiesel, diesel, fuel, coal, d2, petcock, pulses, mustard oil, spices , sanitizer, gloves, medical products, cement, core sand, old ships lng, lpg, all groceries items, food products, hms1 and hms2, fish, chicken feet, chicken paws, agri & food processing agriculture products, fertilizers, seeds, farm products grains, fruits, vegetables, river sands, aggregates, pvc electrical wire, rice, charcoal, wheat flour
Services: Export, import, merchant export import
Buyer: All metals, minerals, petroleum products, food products and paper products
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
Supplier: Engineering goods like machined, forged, stamped, casting, aluminum casting, aluminum extrusion, fasteners, springs, washers, gaskets, oil seals, rubber components, etc