Shibang scm series super thin mill is one kind of rock grinding mill which is likely the shibangs products Raymond mill, high pressure suspension grinding mill , medium speed trapezium mill and so on , and this thin grinding mill is different from others, super thin mill shibang scm is on the basis of our companies production experience for more than 15 years. We absorb advantages from the same trade abroad and at home. We review, research and try on 12 kinds of mills and horizontal hammer crushers. And finally we developed this high-efficiency and low-cost super thin mill by investigation and trial.
This scm series s super thin mill is an equipment which produces thin powder and super thin powder. It is applicable to non-flammable and non-explosive materials with hardness less than 6, such as calcite, chalk, lime stone, dolomite, kaolin, bentonite, talcum, talc, magnesite, illite, pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alum earth, graphite, fluorite, variscite, potash ore, floatstone, so many stones or you can call them rocks.
Note: when users grind the material that hardness degree is between 4 and 6, the service life of the wearing parts will be shortened.
Standard
The super thin grinding mill is an equipment which produces thin powder and super thin powder. It is applicable to non-flammable and non-explosive materials with hardness less than 6, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talcum, talc, magnesite, illite, pyrophyllite, vermiculite, sepiolite, attapulgite, diatomite, barite, gypsum, alum earth, graphite, fluorite, variscite, potash ore, floatstone. Features and Benefits High efficiency In same condition of finished particle size and power of motor, the output is 40% higher than airflow mill and whisk mill. High using rate of the quick-wear part In same condition of material and finished particle size, the lifetime of the quick-wear part is longer than that of impact crusher and turbine crusher. It can be generally one year. High safety Because there are no axle tree and bolt in the grinding antrum, there will be no wear out of bearing and sealing part, also no loose of bolts. Environmental protection It will lighten pollution and noise by using dust cleaner and muffler, which achieves environmental protection requirement.
Scm series s super thin mill This SCM series S super thin mill is an equipment which produces thin powder and super thin powder. It is applicable to non-flammable and non-explosive materials with hardness less than 6, such as calcite, chalk, lime stone, dolomite, kaolin, bentonite, talcum, talc, magnesite, illite, pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alum earth, graphite, fluorite, variscite, potash ore, floatstone, so many stones or you can call them rocks. Features and Benefits * High efficiency In same condition of finished particle size and power of motor, the output is 40% higher than airflow mill and whisk mill. * High using rate of the quick-wear part In same condition of material and finished particle size, the lifetime of the quick-wear part is longer than that of impact crusher and turbine crusher. It can be generally one year. * High safety Because there are no axle tree and bolt in the grinding antrum, there will be no wearout of bearing and sealingpart, also no loose of bolts. * Environmental protection It will lighten pollution and noise by using dust cleaner and muffler, which achieves environmental protection requirement. Structural Characteristic The whole system of the SCM series S super thin mill consists of main unit, deceleration machine, classifier, blower, hammer crusher, dustpan elevator, electro-magnetic vibrating feeder, impulse dust cleaner, piping device, cyclone collector device, classifier, high-pressure motor and muffler. Model: SCM6015 Roller number: 15 Diameter (mm): ¬ª600 Ring number: 2 Main unit speed (mm): 235 Max. Feeding size (mm): 10 Final size (mesh): 325-2500 Capacity (kg/h): 350-2500 Overall dimension (m): 10x2x5.5 Model: SCM8021 Roller number: 21 Diameter (mm): ¬ª800 Ring number: 2 Main unit speed (mm): 235 Max. Feeding size (mm): 10 Final size (mesh): 325-2500 Capacity (kg/h): 600-4000 Overall dimension (m): 12.4x2.x5.8 Model: SCM1027 Roller number: 27 Diameter (mm): ¬ª1000 Ring number: 2 Main unit speed (mm): 235 Max. Feeding size (mm): 10 Final size (mesh): 325-2500 Capacity (kg/h): 900-6000 Overall dimension (m): 14.5x3.8x6.3 Note: This specification is just reference, any changes are subject to the products. 5. SCM series S super thin mill Technological advantages: SBM VSI crusher incorporates three crushing styles; its feeding style incoporates material on material, materials on iron and falling at sides. Customers can adjust the machines according to their own demand. SBM VSI crusher realizes multiple functions in one machine, which is a big breakthrough in sand making field. Excellent performance and long service time: 1.special light oil lubracation systems ensures the temperature to be within 25f¦ 2.brand new automatic protection device provides the machine with vibrating, oil filtering and warning system; 3.new type oil filting system ensures the bearings and other transmission system are not abraded and peolong their service time; 4.choice wearble materials prolong the service time of the machine by 40%. So the cost is lowerd by more than 40%. Model: VSI7611 ; VSI8518; VSI9526; VSI1140 Model:VSI 7611 Capacity (t/h): Feed both at center and at sides:120-180; Feed at center:60-90 Max feed size (mm): soft material ·+35; hard material·+30 Rotation speed (r/min): 1700-1890 Power (kw) : 110-150 Overall dimension L*W*H (mm) : 3700*2150*2100 Weight (t) : 7.8 Model: VSI8518 Capacity (t/h): Feed both at center and at sides: 200-260; Feed at center: 100-130 Max feed size (mm): soft material·+40 ; hard material·+35 Rotation speed (r/min): 1520-1690 Power (kw) : 180-220 Overall dimension L*W*H (mm) : 4140*2280*2425 Weight (t) : 10.3 Model: 9526 Capacity (t/h): Feed both at center and at sides: 300-380; Feed at center:150-190 Max feed size (mm): soft material·+45 hard material·+40 Rotation speed (r/min): 1360-1510 Power (kw) : 264-320 Overall dimension L*W*H (mm) : 4560*2447*2778 Weight (t) :16 Model:VSI1140 Capacity (t/h): Feed both at center and at sides:450-520 ; Feed at center: 225-260 Max feed size (mm): soft material·+50 hard material·+45 Rotation speed (r/min): 1180-1310 Power (kw) : 400-440 Overall dimension L*W*H (mm) : 5000*2700*3300 Weight (t) :25.6
SCM series S super thin mill is also called Micronizer , Industrial Mill, Micron Grinding Mill ,Micron Grinding Mill £¬Ultrafine Mill, Micro Powder Mill which is a kind of Mill, Grinder, Grinding Mill, Milling Machine. On basis of many times experiments and improvement, introducing the latest mechanical techniques of Sweden, SCM Series S Micro-power Grinding Mill .the latest industrial micro-power grinding mill, is a new type grinding machine for producing micro-power. SCM series S super thin mill can grind calcite,limestone,calcite,dolomite,kaolin,bentonite,talc,illite,pyrophillite,barite,meerschaum,fluorite,potash ore and other more than 200 kinds of material that Moh's hardness is blow 9,non-explosive,non-flammable minerals. Model : SCM6015 , SCM8021 , SCM10027 Roller number: 15, 21, 27 Diameter (mm) : ¦µ600, ¦µ800 , ¦µ1000 Ring number:1¡Á3,1¡Á3,1¡Á3 Main unit speed(mm):235,235,173 Max. feeding size(mm):10, 10, 20 Final size (mesh): 325-2500, 325-2500, 325-2500 Capacity (kg/h): 325-2500, 600-4000, 900-6800 Overall dimension (m): 10¡Á2.3¡Á5.5, 13¡Á3¡Á5.8, 18¡Á4¡Á8.6.
Shibang SCM series super thin mill is on the basis of our company's production experience for more than 15 years. We absorb advantages from the same trade abroad and at home. We review, research and try on 12 kinds of mills and horizontal hammer crushers. And finally we developed this high-efficiency and low-cost super thin mill by investigation and trial. This SCM series S super thin mill is an equipment which produces thin powder and super thin powder. It is applicable to non-flammable and non-explosive materials with hardness less than 6, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talcum, talc, magnesite, illite, pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alum earth, graphite, fluorite, variscite, potash ore, floatstone.
Supplier: Jaw crusher, impact crusher, cone crusher, hammer crusher, spiral sand crusher, wheel sand crusher, high pressure suspesion grinding mill, scm series super thin mill, raymond mill, ball mill
This series of jaw crusher can reach the crushing ratio of 4-6 and the shape of final product is even. They are widely applied to crush high hardness, mid hardness and soft rocks and ores such as slag, construction materials, marble, etc. The pressure resistance strength is under 200Mpa, that is, suitable for primary crush. Jaw crusher can be used in mining, metallurgical industry, construction, road and railway building, conversancy, chemistry, etc. Features: 1. Simple structure, easy maintenance; 2. Stable performance; 3. Even final particles and high crushing ratio. Jaw Crusher Operating principle: This jaw crusher uses motor as its power. Through the motor's wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, movable jaw plate and side-lee board can be crushed and discharged through the discharging opening. the price of product..fee is not right, the fee according the contract/could negotiable. Standards.
MTM Medium Speed Trapezium Mill is a leading-world-level industrial mill. It is designed by our own engineers and technical workers, basing on industrial mill research of many years and adopting world-leading-powder processing technology. Our machine adopts many advantages from numbers of mill all over the world, such as trapezium working surface, flexible connection, roll linked pressure boost, etc. It has overcome the traditional mill defect completely in application, capacity, fineness, energy consumption, service life, etc. And it is the ideal substitute of the traditional mill, such as Raymond mill, high pressure suspension mill, ball mill, etc. Nowadays, our products have been widely used in metallurgy industry, electric power industrial, chemical, building, steel industry, coal industry, etc. And it has brought large economic benefits to our customers and the society.
High pressure suspension grinder is mainly applied to the powder processing of mineral products in the industries of metallurgy, construction materials, chemical, and mining, etc. It can produce powder from various non-flammable and non-explosive mineral materials with Mohs hardness below 9.3 and humidity below 6%, such as quartz, feldspar, calcite, talcum, barite, fluoride, Xircom, cinder, white lime, cement clinker, activated carbon, dolomite, granite, soft coal, coking coal, lignite, magnesia, chromium oxide green, gold ore, red clay, clay, kaolin, coke, coal Gangue, porcelain clay, kyanite, fluorspar, bentonite, medicinal stone liparite, diabase, pyrophyllite, shale red stone, emeraldite, basalt, gypsum, graphite, carborundum, heat insulating material, etc.
KX Super-fine Rotor Classifier, Designed by our experts after many yearsí» effort, is an improved classifier. It is the new design on basis of the rotor classifier, integrates the Dimensional vortex Theory with the cyclone collector. It is proved that the efficiency of the classifying can reach to 85%. With the reliable operation, the fineness degree can be easily adjusted.
