Our fenders produced all by our own have passed the iso17357:2002 Britain technical standards of Lloyd's register of shipping (lr) certification test and all the specification is fully in line with international standards.
1), Safe for excess load marine depend on the ball 2), No deterration or variation in performance 3), Safety realiability 4), Construction The fender body is constructed of an inner rubber layer, reinforcing cord layers and an outer rubber layer. All three layers are bonded together by a combination of heat and pressure over a period of time in a vulcanising oven. Once completed, the fenders are pressure tested before relase 5), Simple and low cost installation 6), Chain and tyre net. OD : 0.2~3.5m Length:0.5~7m.
Inflatable rubber fender (near the ball) is made of rubber and nylon cord or other high-strength fabric, filled into the compressed air, it will hang it in the side of the ship or pier, to slow the ship and between ships, ship the impact between the pier. Because of its high energy absorption, impact resistance and other advantages, has become the ship, port facilities necessary protection. 10 pcs per box, made in china.
Place of origin:China Brand name:florescence Model number;all size Name:Pneumatic rubber fender Certification:CCS,ISO17357 Initial pneumatic pressure:0.05/0.08Mpa Sphere weight(kg):25---3080 Reaction load(KN):64---3961 Energy absorption:6----2532 Applicable ships tonnage(T) over 50---10000 Used for ship:transports ships/deepsea trawling ships/transportation ships ect. No packing
Pneumatic Rubber Fenders Introduction Pneumatic fenders is a leading anti-collision device for marine application in the world today. This compressed air rubber fender is used as a protective medium. Therefore, pneumatic rubber fenders serves as a protective medium against collision when ship-to-ship contact (STS) and ship-to-berthing (STB). Pneumatic fenders has the advantages of massive energy absorption with low unit surface pressure acted upon the ship. So penumatic fenders has become an ideal ship protection medium used extensively by large tankers, LPG vessels, ocean platforms, large docks, harbor and wharfs.
Inflatable rubber fender (near the ball) is made of rubber and nylon cord or other high-strength fabric, filled into the compressed air, it will hang it in the side of the ship or pier, to slow the ship and between ships, ship the impact between the pier. Because of its high energy absorption, impact resistance and other advantages, has become the ship, port facilities necessary protection. 10 pcs per box, made in china.
1)size: D1.5mxL3.0m 2) Initial pneumatic pressure:0.05Mpa 3) Weight:380kg(body only) 4) Reaction Force:579KN 5)Energy Absorption: 153KJ 6)Molded production 7)Service life: 10-20years 8)Every piece is inspected to exceed ISO standards
Supplier: Pneumatic rubber fender
Supplier: Pneumatic rubber fender
Supplier: Pneumatic rubber fender, foam filled fender, ship launching marine airbags
