Feed type: gravity
Nozzle dia:0.2-0.3 mm
Body length:150mm
Working pressure:15-50psi
Control: push-button
Cup capacity: 7cc
Plastic box
Air pressure: 14.5psi Air inlet: 1/4í¦ Air consumption: 18-43cfm Cup size: 600ml Feed type: gravity Nozzle size: 1.4mm, 1.7mm, 2.0mm. 2.5mm Color box
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Supplier: Coating tools like paint spreading machine or air brush
Supplier: Plastic scoops, brush painting (white hair), brush painting (black hair), brush M.S. Wire, brush-brass wire, brush bottle wash, welding glass, knife, cutter, painting roller, resin roller, anti rust spray, nylon filter cloth, filter pad, cotton filter cloth (for paint), tarpaulins, cotton waste, manjar pat cloth, scissors, stereo tape (double side), cotton dori, plastic twin packing tag, butter paper, applicator, jute cloth, silica gel white/blue, marker pen, Pvc apron, cotton apron, nose mask, cotton mask, non woven mask, dust mask, safety belt, safety helmet, safety shoes, safety suit, uniform, disposable shoe cover, disposable hand gloves, surgical hand gloves, pvc hand gloves, acid alkali proof h/gloves, leather hand gloves, asbestos hand gloves, liquid soap, phenyle white & black, N.C. Thinner, glass cleaner, room freshner,air freshner, acid, naphthelene balls, urinal cubes, various types of cleaning mops, brooms
• This machine is designed for painting the surface of flat plates. Coating paints by roller. The amount of the paint is controllable by the roller. The painting pump recycles the paints. • Line speed: 2-18m/min. Quick disassembling rollers. High production efficiency • Coating capacity: 8-30g. Adjustable. The painting film is thin and uniform. Great coating result. • Feeding speed adjustable. Thickness controllable. Paint heating. Intelligent controller. Simple and practical operation. • Steel rollers can be lifted with optional electric motor. Roller has pneumatic emergency and rises to protect. Interlock protection. Safe operation. Rubber roller:NBR/EPDM/PUR/Q/Laser Application roller:F250mm Doctor roller:F175mm Lacquer circulation pump Roller Scrapper Metering roller can increase heating controller Power distribution box:L1.L2.L3.N.PE Removable bottom casters CE certificate
• This machine is designed for painting the surface of flat plates. Coating paints by roller. The amount of the paint is controllable by the roller. The painting pump recycles the paints. • Line speed: 2-18m/min. Quick disassembling rollers. High production efficiency • Coating capacity: 8-30g. Adjustable. The painting film is thin and uniform. Great coating result. • Feeding speed adjustable. Thickness controllable. Paint heating. Intelligent controller. Simple and practical operation. • Steel rollers can be lifted with optional electric motor. Roller has pneumatic emergency and rises to protect. Interlock protection. Safe operation. Rubber roller:NBR/EPDM/PUR/Q/Laser Application roller:F250mm Doctor roller:F175mm Lacquer circulation pump Roller Scrapper Metering roller can increase heating controller Power distribution box:L1.L2.L3.N.PE Removable bottom casters CE certificate
We can supply kinds of brushes, paint brush , roller brush and brush set, regular size, bristles and filament material, price depands on order quantity.
Overview Specifications CAS No.: Mixture Other Names: EPOXY COAL TAR PITCH FINISH MF: Mixture EINECS No.: Mixture Place of Origin: Hebei, China (Mainland) Main Raw Material: bitumen, Epoxy Usage: Boat Paint, Building Coating, Car Paint, Electrical Insulating Varnish, Furniture Paint, Road Marking Paint, Boat Paint, Building Coating, Car Paint, Electrical Insulating Varnish Application Method: Brush, Brush State: Liquid Coating Brand Name: JNX Model Number: H52-2 color: black mixing ratio: main agent/curing agent=100/15(weight ratio) solid content: 65% proportion: 1.35 coating ratio: theoretical value:6-7m2/L 70m Packaging & Delivery Packaging Details: 20kg into one metal barrel packaging, 1 ton/pallet,OEM available. Delivery Detail: 20 tons less than a week can be shipped Product Description It is prepared by epoxy resin, coal tar pitch, flake pigment, anti-settling agent and curing agent; it is packaged by two components A and B. Product characteristics It has the advantage of coal tar pitch, i.e. excellent water-proof and aseptic property, as well as the advantages of epoxy resin paint, i.e. good adhesive force, firm paint film, high mechanical strength, good chemical resistance. Lots of flake pigments are added to the finish and after curing, the paint film will form a compact and solid impervious layer. Construction data Non gas spraying, air spray, brush and roller coating Air free spraying Suitable for steel, cement The utility model is suitable for coating of coal tar epoxy primer (twopackage)
Silicon spray
