Single Roller Coater

• This machine is designed for painting the surface of flat plates. Coating paints by roller. The amount of the paint is controllable by the roller. The painting pump recycles the paints. • Line speed: 2-18m/min. Quick disassembling rollers. High production efficiency • Coating capacity: 8-30g. Adjustable. The painting film is thin and uniform. Great coating result. • Feeding speed adjustable. Thickness controllable. Paint heating. Intelligent controller. Simple and practical operation. • Steel rollers can be lifted with optional electric motor. Roller has pneumatic emergency and rises to protect. Interlock protection. Safe operation. Rubber roller:NBR/EPDM/PUR/Q/Laser Application roller:F250mm Doctor roller:F175mm Lacquer circulation pump Roller Scrapper Metering roller can increase heating controller Power distribution box:L1.L2.L3.N.PE Removable bottom casters CE certificate

Roller coater Double Roller Coater is a kind of coating which is applied to the coating surface by the coating roll, and the coating machine is the main type of coating machine. The amount of coating can be adjusted by measuring the pressure between rollers. The pressure is strengthened, the amount of passing paint is reduced, and the amount of coating is also reduced.

2 inche roller frame Description: Single wire roller frame for paint rollers cover, for use corner wall surface Spcification: Inc-plated main rod New plastic handle

Description: single wire rod and cap frame with yellow plastichandle for 7 x 1½ roller cover Spcification: â?¢ Durable Plastic frame â?¢ Wire Materials: Metal, Zinc-plated Cohwa supply a range of paint rollers suitable both DIY'ers and professional painter. There are also mini rollers and radiator rollers available. Paint rollers are supplied either in sets or together with sleeves, roller cages and paint trays, there are a multitude of sizes available, from 4â?³to 15" wide, and a selection of materials to choose from including high density foam, polyester, acrylic, microfiber and simulated sheepskin in a variety of pile types.

Description: Single wire roller frame for mini paint rollers refill,for use corner wall surface Spcification: Chrom-plated Main Rod New Plastic Handle SKU List SIZE DIAMETER CASE 4"x 12" 5.4mm 120 4"x 20" 5.4mm 120 Cohwa supply a range of paint rollers suitable both DIY'ers and professional painter. There are also mini rollers and radiator rollers available. Paint rollers are supplied either in sets or together with sleeves, roller cages and paint trays, there are a multitude of sizes available, from 4â?³to 15" wide, and a selection of materials to choose from including high density foam, polyester, acrylic, microfiber and simulated sheepskin in a variety of pile types.

Easy To Apply Single Pack Superior Durability Excellent Gloss Retention SCOPE USES Kisomin Aluminium Paint is a modified Synthetic Resin based enamel. It provides high Light fastner and brightness with excellent orientation finish. it has good adhesion on interior or Exterior surfaces. Recommended as a decorative finish coat & can be applied on surfaces like Grill, Windows, Cabinets & wide range Metal Structures. FEATURES/ BENEFITS * Smooth durable finish. * Smooth flow & easy to apply. * Excellent coverage & hiding. * Superior surface protection KEY ATTRIBUTES * Application temperatures : 10-44 degc VISCOSITY FOR APPLICATION * For Brushing 40"-45" at 30C * For Spraying 18" 20" at 30C * For Roller 55"-60" at 30C SURFACE PREPARATION APPLICATION BRUSH CONVENTIONAL SPRAY NOTES : HEALTH & SAFETY Steel : Sand the surface with coarse Sand / water paper according to the type of surfaces to remove rust, dust & other foreign particles. System of Coating should be selected depending upon the type of substrate. Wipe to clean the surface. Apply single coat primer & allow to dry. Re sand the surface with Sand paper & wipe to clean. Apply 2nd Coat of primer & allow drying for overnight. Before application of paint, thin down to achieve desired viscosity & filter through white cloth. Apply Kisomin Paint to finish. Stir the base thoroughly and then mix to uniform consistency. Apply by diluted material, where viscosity has to be ensure 40-45 sec by f.c. B4 Add Kisomin thinner to adjust viscosity depending on spray condition. Use any standard equipment at an atomizing pressure of 3.5-4.5 kg/cm. 1. Use off the mixed paint . 2. Do not apply when temperature falls below 10c or rises above 50c and when relative humidity rises above 90%. Do not apply during rain, fog or mist 3. Brushes and spray equipment should be cleaned with Thinner, 4. Special care to be taken to close immediately the partly used Diluted Material. Please refer to the separate Material Safety Data Sheet available with detailed information

HI - Performance Syn. Enamel Paint Superior Durability Color Pigment System Easy To Apply By Brush , Roller And Spray PRODUCT PARAMETERS 1. Type : Single Pack 2. Composite : Modified Oil Based Resin with Finest Bright Pigments, Hydrocarbon solvent and addives 3. Use Recommended Thinner to make Applicaon Viscosity 4. Applicaon Tools : Brushing, Spraying or Roller 5. Flash off = 30 Minutes 6. Drying Time : Surface Dry : 4 Hours Hard Dry : Overnight 7. Curing Time : 72 hours 8. Over coang Interval : MIN : Overnight MAX : 5 Days 9. Color : Assorted Shades . Finish : 10 Smooth Finish 11 Thinner / Cleaner KISOMIN THINNER 12. Shelf Life: Up to 12 Months as long as the sealed containers are kept under cover in a dry place under normal temperature. SCOPE USES Kisomin durable synthec enamel are long lasng & solvent based paint used for wide range of surface. Recommended as a decorave finish coat & can be applied on surfaces like Metal, Cement Brickwork, Asbestos Grills and Wooden surfaces like doors, Windows, Cabinets & wide range of furniture FEATURES/ BENEFITS * Smooth durable finish. * Smooth flow & easy to apply. * Excellent coverage & hiding. * Superior surface protecon. KEY ATTRIBUTES * Applicaon temperatures : 10-44 degc PERFORMANCE PROPERTY Chemical Resistance A Exposures Splash & Mild Fumes/Outdoor Spillage Resistance cid + + Alkalis + + Solvent NA NA Salt ++ ++ Water +++ +++ Flexibility +++ Adhesion +++ Excellent : +++ Very Good : ++ Good : + SURFACE PREPARATION APPLICATION BRUSH CONVENTIONAL SPRAY NOTES : HEALTH & SAFETY Steel : Sand the surface with coarse Sand / water paper according to the type of surfaces to remove rust, dust & other foreign parcles. System of Coang should be selected depending upon the type of substrate. Wipe to clean the surface. Apply single coat primer & allow to dry. Re sand the surface with Sand paper & wipe to clean. Apply 2nd Coat of primer & allow drying for overnight. Before applicaon of paint, thin down to achieve desired viscosity & filter through white cloth. Apply Kisomin Paint to finish. Sr the base thoroughly and then mix to uniform consistency. Apply without thinning Add Kisomin thinner to adjust viscosity depending on spray condion. Use any standard equipment at an atomizing pressure of 3.5-4.5 kg/cm�². 1. Use off the mixed paint . 2. Do not apply when temperature falls below 10 C or rises above 50�°c and when relave humidity rises above 90%. Do not apply during rain, fog or mist 3. Brushes and spray equipment should be cleaned with Thinner, 4. Special care to be taken to close immediately the partly used Diluted Material. Please refer to the separate Material Safety Data Sheet available with detailed information