Dimension: 0.2-400*1000*2000mm, 0.5-400*1220*2440mm.
Offers excellent corrosion resistance, easily welded, but brazing or soldering is not recommended. Offers fair machining with proper set up.
Usage
Mainly used in fuel and storage tanks, truck and trailer side panels, small boat hulls and truck cabs.
Standard export packaging
5052 aluminum coils is Aluminum-magnesium alloy aluminum coils. Mg is the main alloying element in 5052 aluminum coils. It is the most widely used rust-proof aluminum. The alloy is high in nature, especially fatigue resistance, plasticity and corrosion resistance, with high strength. It can not be heat-treated, the plasticity of it is good in semi-cold hardening. It s low in plasticity during cold hardening, and good in corrosion resistance with good weldability, poor machinability and polishing. The main alloying element of 5052 aluminum sheet is magnesium, and aluminum-magnesium alloy also contains a small amount of Mn, Cr, Ni, Ti, etc. Most of the Mn in the alloy forms MnAl6 except for a small amount of solid solution. In the interior of the 5052 aluminum coils, the effect of Cr is similar to that of Mn, which improves the resistance to stress corrosion cracking, improves the strength of the base metal and weld, and reduces the tendency of weld cracking, but its content generally does not exceed 0.35%. Surface Advantages of 5052 Aluminum coils: 1. surface of 5052 aluminum coils is not allowed to have cracks, corrosion spots and traces of nitrate. 2. The surface is allowed to have peeling, air bubbles, surface roughness. and it is also allowed to have local mechanical damage with a depth not exceeding 8% of the nominal thickness of the part where the defect is located. But the maximum depth of the defect shall not exceed 0.5 mm, and the total area of the defect shall not exceed the total area of the coils 5%. 3. Allow the supplier to illuminate the profile longitudinally to a smooth surface. 4. Other requirements: There are demanders and suppliers to draw up their own. Application of 5052 Aluminum coils: 5052 aluminum coils is mainly used for high plasticity with good weldability. It is also commonly used in transportation vehicles, ship sheet metal parts, instruments, street lamp brackets and rivets, hardware products, electrical enclosures, etc. It can also be used to manufacture aircraft fuel tanks, oil pipes, aerospace aluminum alloy materials, and is a typical rustproof alloy material. The atates of 5052 aluminum coils includes F, O, H12, H14,, H16, H18, H19, H22, H24, H26, H28, H32, H34, H36, H38, H111, H112, H114.
5052 aluminum coils is Aluminum-magnesium alloy aluminum coils. Mg is the main alloying element in 5052 aluminum coils. It is the most widely used rust-proof aluminum. The alloy is high in nature, especially fatigue resistance, plasticity and corrosion resistance, with high strength. It can not be heat-treated, the plasticity of it is good in semi-cold hardening. Itâ??s low in plasticity during cold hardening, and good in corrosion resistance with good weldability, poor machinability and polishing. The main alloying element of 5052 aluminum sheet is magnesium, and aluminum-magnesium alloy also contains a small amount of Mn, Cr, Ni, Ti, etc. Most of the Mn in the alloy forms MnAl6 except for a small amount of solid solution. In the interior of the 5052 aluminum coils, the effect of Cr is similar to that of Mn, which improves the resistance to stress corrosion cracking, improves the strength of the base metal and weld, and reduces the tendency of weld cracking, but its content generally does not exceed 0.35%. Surface Advantages of 5052 Aluminum coils: 1 - surface of 5052 aluminum coils is not allowed to have cracks, corrosion spots and traces of nitrate. 2 - The surface is allowed to have peeling, air bubbles, surface roughness. and it is also allowed to have local mechanical damage with a depth not exceeding 8% of the nominal thickness of the part where the defect is located. But the maximum depth of the defect shall not exceed 0.5 mm, and the total area of the defect shall not exceed the total area of the coils 5%. 3 - Allow the supplier to illuminate the profile longitudinally to a smooth surface. 4 - Other requirements: There are demanders and suppliers to draw up their own. Application of 5052 Aluminum coils: 5052 aluminum coils is mainly used for high plasticity with good weldability. It is also commonly used in transportation vehicles, ship sheet metal parts, instruments, street lamp brackets and rivets, hardware products, electrical enclosures, etc. It can also be used to manufacture aircraft fuel tanks, oil pipes, aerospace aluminum alloy materials, and is a typical rustproof alloy material. The atates of 5052 aluminum coils includes F, O, H12, H14,, H16, H18, H19, H22, H24, H26, H28, H32, H34, H36, H38, H111, H112, H114.
Product: 5052 Aluminum Circle Alloy: 5052 Aluminum Circle Temper: O, H32, H34, H111 Thickness: 0.5mm-6.0mm Diameter: 100mm-1200mm Lead Time: depends on the order, as usual, within 25days. Packing: standard Exporting wooden pallets or based on customer requirement Material: using high-tech machinery utilizing premium grade Aluminium Coil. Customized according to the needs and demands of the clients these can be availed at different technical specifications. Surface: bright & smooth surface, free from defects like white rust, oil patch, edge damage. Application: aluminium Circles are used in Reflective Sign Boards, Road Furniture, Utensils, Sand witch Bottom, Cooker, Non-Stick etc.
Introducing our premium-grade aluminum billets designed for automotive precision. Crafted with precision and durability in mind, these billets serve as the raw material for manufacturing critical components in the automotive sector. Benefit from the lightweight properties and structural integrity that our aluminum billets offer for enhanced vehicle performance.
Products Name: Pure Aluminum A7 Ingot 99.9% Chemical Composition: Al Weight: 20/25kg Al (Min): 99%-99.9% Appearance: silvery white Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth. Item: A7 Aluminum ingot 99.7 high quality Standard: GB/T 3190-2008 JIS H4040:2006 JIS H4001:2006 ASTM B221M:2006 ASTM B209M:2006 ISO 209:2007(E) EN 573-3:2003 etc. Material: 1000 Series Size: Thickness:0.1-200mm,or as requiredWidth:0.1-2000mm,or as required Size can be customized according to customer needs Surface Bright, polished, hair line, brush, sand blast, checkered, embossed, etching, etc. Application: mainly used for melting ingot; discontinuous melting with scrap; easy control and operation; fast melting; Used for industry such as automobile, pinning and weaving, electron broadly and so on . Export to: Worldwide etc. Package Standard airworthy export packaging: wooden pallets with plastic protection or according to customer requirements Packaging Details: Packing 25KG/INGOT, 1000KG or 1050KG/bundle, or as your requirement AL â?¥ Fe Si Cu Ga Mg Zn others Total 99.9 0.07 0.05 0.005 0.02 0.01 0.025 0.016 0.01 99.85 0.12 0.08 0.005 0.03 0.02 0.03 0.015 0.15 99.7 0.2 0.1 0.01 0.03 0.02 0.03 0.03 0.3 99.7 0.2 0.12 0.01 0.03 0.03 0.03 0.03 0.3 99.6 0.25 0.16 0.01 0.03 0.02 0.03 0.03 0.49 99.5 0.3 0.22 0.02 0.03 0.05 0.05 0.03 0.5 99 0.5 0.42 0.02 0.05 0.05 0.05 0.05 1