Accuracy: class 1.5 (over 60a class 2.5)
Specifications: 0.1a, 0.5a, 1a, 1.5a, 3a, 5a, 7.5a, 10a, 15a, 20a, 25a, 30a, 50a, 75a, 100a and if over 100a, meters can be contacted current transformer with secondary current 5a or 1a.
Adantage: the scare can be easily changed without opening the front frame so that the class will not be influenced.
CP-M maximun demand consists of 2 bimetallic spirals which are installed working one against each other. Maximun demand indicators are especially suited for the supervision of thermal load of cables and transformers. The instrument has a sealable resetting knob with which the red drag indicator can be resetted on the position of the meter's movement pointer (Do not turn lower!). Thermal time delay 15 min. FEATURES M4 screw connections with clamps make this easier Clamping the connecting wires. Housing use matiral match UL94V-0 standard All fastenings suitable for shaking and shock resistance. Accept special customization requirements
CP-W and CP-var analog power meter consists of a moving coil meter with installed transducers which measures the active / reactive power in a sinusoildal or not sinusoidal current circuit and which transformes it into an analogue signal. This is then passed to the moving coil movement. FEATURES M4 screw connections with clamps make this easier Clamping the connecting wires. Housing use matiral match UL94V-0 standard All fastenings suitable for shaking and shock resistance. Accept special customization requirements
Electric panel meters and its equipment on demand
Supplier: Analog and digital panel meters
Supplier: Analog panel meters, digital panel meters, electrical transducers, current transformers, digital multimeters, insulation testers, power analyzers
Panel meter Widely used in refrigerant, aqua-containers, food-processing, heating, green house, medical equipment
Panel Meter
Features: 1. Bargraph and/or digital displays 2. Single or dual channel 3. Transmitter power supply for 2-wire loop powered input 4. Variety of input types 5. Non-linear tank volume calculation, retransmission output and relay outputs available 6. Horizontal or vertical orientation
Digital panel meters Digital Panel Meters are for the measurement of electrical parameters like voltage, current,freqency, power, power factor,energy(KWh), for indications meters are there & for analog dc signal outputs in 4-20 mAdc or 0-10 v dc. Din standard instruments eith corrugated packaging or on demand at extra amount can be forwarded.
