Sanitary centrifugal pump
Performance
Rate of flow: 3m3/h-60m3/h
Pressure: Max working pressureí_0.45Mpa
Max entrance pressure: 0.4Mpa
Temperature scope: ¿C10íµ - + 140íµ
Noise level: 86db
Characteristics:
MP centrifugal sanitary pump is a pump of single grade, single suction, semi-open impeller. With elaborate design for pump shell and impeller, the resistance is greatly reduced which makes the medium conveyed smoothly and softly.
Semi-open impeller structure guarantees the best fluid power and sanitary characteristics.
Inside the pump, the shaft seal situates at the best position of medium flow, which makes the seal easy to cool or wash and so to prolong the mechanical sealí»s service life.
For the special structure of the pump, the whole performance of the pump is improved a lot. The smooth polished surface and non-dead corner design meet the requests of CIP/SIP, which make the pump easy to wash, therefore it could satisfy large scale of customers who have high level sanitary requests.
The MP pump is characterized with easy starting, high efficiency, stable running, easy maintenance, etc.
The stable starting prevents sudden pressure change, this can protect effectively piping system and its parts.
The superior performance of the pump prolongs the motor service life with low noise, low vibration, high quality protection grade and insulation grade.
The movable end frames could adjust height freely and it could also be installed on various brackets.
Material
The major material of the pump is AISI304 or AISI316L stainless steel which has low shearing force. The parts contact with medium could be treated with different choice of polishing, which ranges from sanitary polishing to super mirror surface polishing.
Material
Impeller: Cast totally of AISI304 or AISI316L
Pump shell: Rolled totally of AISI304 or AISI316L
Mechanical seal: Milestone centrifugal sanitary pump has a balance single(double) end(s) sanitary mechanical seal
Shaft: Made of AISI304 or AISI316L by numerically-controlled machine tool
O-ring: Silicon rubber ,fluororubber, Teflon or supply according to the requests.
Surface treatment status
Inside of the front and back cover, impeller are polished
Outside surface is polished with mirror surface standard or treated by sandblast
Motor
1.The motor is designed and made according to international standard
International electrician committee IEC60034, IEC60072
Britain standard BS4999-5000
Australian standard ASI1359-2
Germany standard DIN42673
Conforms to EC í¦CEí¦mark request
2.The motor conforms to the following standards
GB755 (IEC60034)
GB10069 (IEC60034-9)
Q/JBQS28
3.Equipped with standard wholly sealed, cold wind squirrel cage asynchronous motor, whose size conforms to IEC60034 and DIN42673.
Entrance jointing methods
A is ISO buckle joint
B is ISO screw loose joint
C is DIN screw loose joint
D is SMS screw loose joint
E is BS screw loose joint
F is flange joint
Sanitary valves
Reference standards: iso, gb, din, idf, 3a, hgj, sh, jb, qb, ansi
Conform to gmp and fda requirements.
Diameter range: dn6-200mm
Flow direction: straight, three-way and multi-way
Drive type: electric, pneumatic and manual
Sealing materials: silicon rubber, edible non-toxic rubber, ptef
Connecting types: ferrule quick-install, iso/sms/din thread (british
System/metric system), flange and welding.
Surface treatment: mirror polishing, lusterless treatment, acid pickling
Material: aisi316l or aisi304
For detail data, please refer to "a handbook of pipe fittings pipelines
Common specifications: 19.5, 25.4, 31.8, 38.1, 45, 50.8, 57, 63.5, 76.1, 88.9, 101.6, 108, 114.3, 133, 159, 219
Wall thickness:1.2mmó1.5mmó2mmó2.5mm
Maximum working pressure: n0.98mpa, pipe length: 4-6 m/piece
Stainless steel seamless pipe adopts gb/t14976-94 standard, stainless steel welded tube adopts gb/12771-91 standard.
19.5, 25.4, 31.8, 38.1, 45, 50.8, 57, 63.5, 76.1, 88.9, 101.6, 108, 114.3, 133, 159, 219
Drum type film filter
Used for pre-filtering and terminal fine filtering of the mediums as thin liquid, air, soup, pure water etc.
Flow:0.5m3/h-30m3/h
Filter precision ¦0.1-20ª8m
Filter elements have two connecting forms as insert-type 226seat and flat mouth type 226 seat.
Filter element: 5, 10, 20, 30
Filter element can adopt polypropylene, nylon, ptef etc.
Drum adopts aisi304 or aisi316l material, inner and outer surfaces adopt polishing, surface roughness ra<0.4ª8m
Single-effect outer cirulation concentrator
The device is to concentrate the material in the occasions such as china traditional drugíwest drugídextroseíamylum sugaríoral liquidíchemistryífoodstuffímonosodium glutamate and milk product and to reclaim the industrial organic solvent such as alcohol.It is suitable to concentrate the thermal sensitive material under lower temperature and vacuum with little batch number and multiple varieties.
Feature and profits
1.Alcohol reclamation: large reclamation capacity and the vacuum concentration procedure make it's production capacity five to ten times of that of the old counterpart and can lower the energy consumption for 30%, featuring little investment and high reclamation profit.
2.Cocentrated liquid material: the device uses the modes of outer-heated natural cycle and vacuum negative pressure evaporation featuring swift evaporation with concentration proportion of 1.3; the liquid material concentrates without bubble under full seal state. The drug liquid after concentration by the device features non-contamination and thick drug taste and easy cleaning(it is just to open the up and down cover for cleaning.). The device is easy to handle and it needs a little foundation area for installation. The heater and evaporator use stainless steel for thermal purpose.The polyurethane is used as the thermal material. The surface is treated with sand grinding and surface polishing, meeting with the gmp tandard.
Multi-functional exacting tanks
The device is to service at such industries as china traditional drug, foodstuff and chemistry for the technologies such as normal pressureíómini pressure, water decocting, warm immersion, thermal circumfl uence, compelled recycle and leakage, extraction of aroma oil and reclamation of organic solvent with the features of high efficiency and convenient operation. The cip cleaning system inside the tank meets with the gmp standard.
With single gas cylinder and lock with dual-gas cylinder accompanied with a secure gas-lock cylinder. The complete device is easy to start and has a reliable self-lock performance. The programmed control eliminates the leakage or detachment caused from the unstable gas pressure for traditional structure with omplete security.
Storage tank
Technical data
Storage tank includes vertical or horizontal type, and adopts ovalshaped or disk type head, and can be equipped with jacket or heat insulation on request.
Capacity: 0.1m3í½100m3, can be designed and made as users' demand.
Material: aisi316l or aisi304, jacket and outer protection shell adopt aisi304 polishing or lusterless treatment.
Jacket type: full jacket, coiled type, beehive type thermal insulation material: pearl cotton, rock cotton filling or polyurethane foaming
Surface treatment: inner and outer surfaces adopt polishing, inner surface roughness ra<0.4ª8m, outersurface adopts mirror polishing or lusterless treatment.
Configuration
Quick-open manhole
Integrated visual mirror and lamp
Thermometer ( digital display or dial type)
Liquid level gauge interface (capacity, ultrasonic, differential
Pressure and glass tube type level gauges are available)
Air breather interface
Cleaning interface ( 360íp automatically-revolving cleaning
Machine or double-circulating automatic cleaning machine)
Feed liquid inlet and outlet, backup port
Steam inlet and outlet
Condensed water inlet and outlet
Liquid-formulation tank
Usage widely used for biopharmaceutical productive process such as formulating, dissolving, heating, cooling, warm-keeping, cultivating, disinfecting and storage.
Technical data liquid-formulating tank includes vertical or horizontal type, and adopts oval-shaped or disk type head, and can be equipped with jacket or heat insulation on request.
Capacity: 0.1m3í½30m3, can be designed and made as users' demand.
Material: aisi316l or aisi304, jacket and outer protection shell adopt aisi304 polishing or lusterless treatment. Jacket type: full jacket, coiled type, beehive type.
Thermal insulation material: pearl cotton, rock cotton filling or polyurethane foaming
Surface treatment: inner and outer surfaces adopt polishing, inner surface roughness ra<0.4ª8m, outersurface adopts mirror polishing or lusterless treatment.