MDC-L200 Laser Taper Measuring Instrument (Multi-dimensional Detection)
Overview:
Laser taper measuring instrument (multi-dimensional detection) is a new type of mold multi-taper measuring instrument developed by our company. The instrument adopts a high-precision, high-sensitivity laser measurement and positioning sensor, which scans the copper plate of the mold by a fixed-width laser line, and returns the measurement data in real time. The host computer shows the data of mold taper, surface cracks, surface flatness and other data after modeling and analyzing the returned measurement data. The upper computer software intuitively reflects the situation of the multi-taper surface of the tested mold to the user in the form of data table, data curve and 3D model diagram of the mold taper, and provides a true and reliable theoretical basis for the on-site operators to maintain the mold.
The features:
Humanized human-computer interaction interface
Convenient system settings
Portable low power consumption design
Compatible detection structure with lots of specifications
High-speed and stable wireless data transmission
High-precision laser scanning measurement
One-click measurement design
Own network wireless transmission
Small and lightweight front-end measurement
The parameters:
Mold width range: 60~400mm
Measurement accuracy: 0.01mm
Spot diameter: 1.0x1.5mm (spot scan), 1.0x20mm (line scan)
Measurement method: laser displacement measurement
Measuring beam: 3200 points
Movement mode: high precision servo
Movement accuracy: 1mm/65536 pulses
Single measurement time: less than 2min
Power supply: DC12V
Operating temperature: -20~80â??
Shock resistance: 50G (X, Y, Z axis)
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
Laser cutting (84561000)
Olympus CV-170 Video Processor and LED Light Source You can only treat what you can see. HD videoscopes have quickly become the standard in many ENT procedures due to the ability to examine mucosal patterns with greater clarity than traditional fiber or SD videoscopes. For the first time ever, HD laryngoscopy is now available to the patients who need it most at the point where it is most valuable: diagnostic laryngoscopy in the office. With LED light, HD scope support, and Narrow Band Imaging (NBI) built into one, compact box, the CV-170 provides physicians with exceptional diagnostic tools at an affordable price for any office.
Supplier: Engineering products, home textile & apparel products, dental chairs, laser cut components, sheet metal components mechanical/electrical equipment & spares, handicrafts, wood and allied products, raw surgical cotton.
Services: Trading & supply, product sourcing, export management and market research. identifying and procuring top quality products to meet the demands of our clients.
Supplier: Thermal monocular and cameras
Laser irradiation in nasal cavity by laser bio-stimulation, laser irradiate sympathetic and parasympathetic nerves in nasal cavity, shrink and expand blood vessels in nose mucosa, which reflectively improve blood circulation in head and the whole body, achieve assistant therapeutic effect on hyperlipidemia, cardiac & cerebral diseases. Low-frequency pulse current acts on acu-points or affected parts on the outer body by tap, massage and knead. It can stimulate nerve muscle tissue.improve part blood circulation, dredge meridian, relieve pain,and eliminate or relieve disease. Packing spec. Size(mm) n.W(kg) g.W(kg) 1 set packing 300f-325f-70 0.43 0.68 10 sets packing 550f-375f-335 8.8 11.0
Our organization is offering an astonishing range of Laser Cutting Services. Offered array of services is rendered according to quality norms. In addition to this, offered services are much admired due to their hassle free management, on-time execution, and client-focused approach. Materials We Cut: Stainless Steel, Brass, Copper, Aluminum Mild Steel, Carbon Steel, Galvanize Steel We benefit our customers with: Our Laser Cutting-Bending software are qualified to handle any complicated shape with less process time and high accuracy with zero tooling cost with prompt services in low/high (Bulk) Quantities Supply. We look forward to business association with you for long term. We offer economical rate in volume business tie up
LDC-X200 Laser Diameter Measurement System Overview The non-contact diameter measuring system, is mainly used in the measurement of the outer diameter of various wire rods, bars, wires and pipes. The system can detect the change of the diameter (outer diameter) of the measured object in real time under the high temperature state. The working principle The diameter measuring system takes the laser scanning method as an example. It adopts the probe imported from Japan, which can achieve an accuracy of plus or minus 2 microns in the range of 0.3 to 30 mm. The acquisition frequency reaches 2000 times/second. The probe uses a self-excited infrared light source, which overcomes the measurement problem in dim environments. It adopts the measurement method of pulse parallel light scanning, and has a strong ability to resist the jitter of the measured object. (As shown in Figure 1) Since the shaking frequency of the measured object is much smaller than the scanning frequency, when the measured object A moves in the shakeable area, the measurement result will be able to ensure its accuracy because the time it blocks the beam does not change. Figure 1: Probe Scanning Radiation Area The detection principle is as follows Figure 2: Working Principle First, the crystal oscillator generates self-excited high-frequency pulses, which are sent to the comparator and the stepping servo motor respectively. The stepping servo motor drives the octahedral prism to rotate at a high speed, and reflects the infrared laser emitted by the laser generator to the convex lens A. It becomes parallel light, and then collects on the photosensitive element C through the convex lens B in the infrared receiving probe. The photosensitive element C converts this signal into a corresponding electrical signal and sends it to the other end of the comparator to compare with the original signal. When there is no object to be measured in the measuring probe, the pulse signal at both ends of the comparator will be the same. Therefore, there is no difference output: when there is an object to be measured in the measuring probe, the photosensitive element C will output no pulse signal during the period of scanning through the object to be measured. Therefore, there will be a difference input for a period of time at both ends of the comparator, which corresponds to the diameter of the measured object. By calculating the oscillation period of the pulse and the length of the time slice without pulse, the diameter of the measured object can be known.
Indications: Wrist part and nasal probe: Balance the HIgh blood pressure, Reduce the High cholesterol, High blood fat, High blood sugar and High blood viscosity , Reduces risk of heart attack , Reduces risk of stroke , Reduces inflammation and swelling, Energizes cell activity and bloodstream , Strengthens the immune system , Regulates blood flow and circulation , Enhances oxygen carrying capacity , Improves cell deformability. Oral t& throat probe treatment range :snore, pharyngitis, mouth or tongue skin ulcer.
