Cs magnetic mud separators
Brief introduction:
The series cs magnetic mud separators are mainly used for fine mineral separation to separate the magnetic particles from the non-magnetic particles (mineral mud) by the gravity force, magnetic force as well as water flow force.
By computer design the product features with high efficiency, high reliability, rational structure and easy operation.
Standard packing
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
Magnetic tubes are a simple low cost form of magnetic separation. Used in a variety of industries from food or plastics processing to chemical and powder processing, according to the environment of your product, these magnetic filter bars can be made with alnico, ceramic or rare earth magnet material. They can be easily installed into machinery or assembled according to the wishes of the customers. Encased in either 304 or 316 stainless steel tubes 25.4mm diameter, we offer them with either standard ferrite magnets or high intensity rare earth magnets (up to 12, 000 gauss). We manufacture them specifically to the length requested by the customer. The sealed stainless steel ends are drilled and tapped for fixing purposes
Magnetic Separator Industrial Metal Shredder Scrap Shredder Machine  It is scientifically designed and reasonably configured following customized schemes on customersâ??field ,output,material types and so on.It is high in automation; Monitored by computer,PLC control,safe,high-efficient,conservation of labor; Over 90% are produced by the component;quality materials are used for key components;it has exquisite techniques that are more solid and durable; All-out environmental supporting facilities on shock absorption,noise reduction and dust removal help bring down second-time pollution Remote diagnosis24 hours of uninterrupted after-sale service.
Hmds wet magnetic drum separator is widely used in coal mine processing. With the development and expansion of heavy media processing technique, drum separator for heavy media processing is widely used in coal-washing plant. The structure of coal mine used drum separator has never had big change, while with the application of new magnetic material, magnet developed from simplex ferrite, mixed magnet to rare earth super strength magnet. Magnetic intensity was raised greatly, improving the recovery percent and lowering media consuming effectively. Features: 1. Important role in coal mine recycling 2. High minmal permanent magnet 3.Keep magnetism for long time 4.Duble stainess steel structure of the pullyer 5.High recycling rate Heavy media content rcycling rate 87-130kg/m3 >99.7% 130-260kg/m3 >99.8% >260kg/m3 >99.9%
RCYB suspended permanent magnetic iron separator | Series Permanent magnetic Separators Product Description Handy Permanent Magnetic Separator RCYB Series RCYB series is suspended over conveyor belt.It is suitable for continuous-duty occasions and remove 0.1-30kg of ferromagnetic material which mixed in the raw material. This equipment has a high magnetic field intensity, no energy consumption and a long service life. It is easy to install and use without maintenance. This equipment is widely used for the iron removal from non-magnetic materials on belt conveyors, vibrating conveyors, vibrating feeders, chutes, etc. Handy Permanent Dry Separator Main Features: -- NdFeB magnets for magnetic source of reliable magnetic properties -- In the depths of non-magnetic materials can absorb up 0.1-0.30kg iron -- Core guaranteed 10 years under normal circumstances; Neverless than 5% demagnetization -- Artificial regularly dumping iron, and is of small size, light weight, easy installation features Appllication: The interior of RCYB series suspended permanent magnetic iron separator adopts high coercive force, high residual magnetism permanent magnet "Nd--Fe--B" materials to form complex mag netic system suitable for iron removal of non-magnetic materials on the belt conveyor, vibrating conveyor, electromagnetic vibrat- ing feeder and feeding down-spouting. To remove 0.1~35kg ferromagnetic materials permanent magnetic system in the interior can be used over ten years. Standard Export Package: (fixed iron frame with five polywoodboard packing to keep safety long-distance transportation;Don't need to be fumigated.) Quick Response: --We highly appreciate your any enquiry by email, fax or instant message. --We will reply your email or fax within 24 hours. --Please fell free to call us at any time if there is any questions. Convenient Transportation: *All available shipping ways could be applied, by courier, air or sea. *Appointed shipping company or our own forwarders all could be used in shipment. *Full-way tracking the cargos for you till the goods arrive.
MAGNETIC SEPARATOR,High Intensity Magnetic Separator To remove magnetic metal content from grains to protect other machines safely. Especially for the devices that have a forceful effect on stock, such as wheat scourer, roller mill, etc. To remove the metal powder mixed in flour during milling process and to ensure product purity, magnetic separation is needed before finished product packaging. Metal construction. Casing with access door. Removable permanent magnet to remove extracted magnetic metal. Model Inner diameter (mm) Capacity (t/h) Magnetic material removing efficiency Weight (kg) Dimension (mm) HCXC12 120 4 99.90% 5 Φ200330 HCXC13 130 8 10.5 Φ250400 HCXC15 150 10-18 25 Φ275500 HCXC20 200 28-35 31.5 Φ300600 HCXC25 250 35-45 43 Φ400600
To discuss again Dimensions 200/500/750/1000/1500/2000mm
Q:how are magnets made? ¡ê¨¢¡êomodern magnet materials are made through casting, pressing and sintering, compression bonding, injection molding, extruding, or calendaring processes. Q:how rare earth magnets are made ¡ê ¡ê¨¢¡êomining => melting => milling => aligning&pressing => sintering => inspecting => machining => plating/coating => inspecting => magnetization => packing&shipping . Our factory produce and manufacture magnets according to customer's design on shape, dimension, grades, coatings etc. When inquiring, following information offered will be much appreciated . 1.Type of magnet (material & grade) 2. Quantity (annual and per shipment) 3. Shape and dimensions (drawing if necessary) 4. Direction of magnetization 5. Magnetized or not 6. Details of surface treatment 7. Application if possible 8. Other information or requirements Shape and size Block:length x width x thickness Disc / cylinder:diamter x thickness Ring:external diamter x internal diameter x thickness Segment:according to the drawing Irregular:according to the drawing Package: Air package, sea package, standard package, shielding package to pass through the security at the airport. Technical specifications of sintered neodymium magnet Grade Remanence br Mt (kg) Coercive force hcb Ka/m (koe) Intrinsic coercive force hcj Ka/m (koe) Maximum energy product bhmax Kj/m3 (mgoe) Maximum operating temperature tw Oc Wooden frame and carton box
High energy-saving magnetic separator: A dry magnetic separator for strong magnetic minerals with coarse particles, and it is also called magnetic pulley. Capacity:20-600t/h Permanent magnetic drum is also called magnetic pulley, apparatus magnetic equipment for magnetite ore, mainly used for pre concentration before fine crushing or grinding to remove the gangue, deads and tailings, and the tailings out rate is about 10%.
