Cs magnetic mud separators Brief introduction: The series cs magnetic mud separators are mainly used for fine mineral separation to separate the magnetic particles from the non-magnetic particles (mineral mud) by the gravity force, magnetic force as well as water flow force. By computer design the product features with high efficiency, high reliability, rational structure and easy operation. Standard packing
Magnetic stirrer With the unique magnetic circuit and special high performance alnico treated by special technology, it can resist high-temperature with long life. Using mechanical drive for stir, lift and movement, it can wok reliably, safely and environmental protection. Using the alternatively clockwise and anticlockwise, the solution can be stirred effectively with adjustable speed and interval. The depth can achieve more than 100-700mm. The electric consumption for our permanent magnetic stirrer is less than 5 percent of electromagnetic stirrer under the same tonnage. Matching with the perfect wind-cooling system, the working temperature can be controlled within 65. High efficiency, continuous work. It can work for many functions at different time. Equipped with the advanced remote controlling system, it has a high degree of automation and its operation is simple and convenient. Standard packing
The inner adopts blower to force air cooled, easy operation, using convenient, used in good environments. It can match with the crusher and conveyor to eliminate the iron and play a reliable protection on the roller press machines, crushers, vertical mills and so on. Standard Packing
íñThe magnetic circuit is designed by the computerization imitation and the magnetic depth is deep, the magnetic force is strong. íñThe inner adopts special resin to pour with wholly sealed structure that can be dustproof, rainproof, rotproof. íñThe wing type thermal fin to enlarge the area of heat dissipation. íñIt can be used to remove 0.1-35kgs ferromagnetic material from non-magnetic material effectively. Standard Packing
It adds unloading iron structure consisting of driving motor, roller and belt with scraper. This system can remove the ferromagnetic material to iron box outside the separator automatically and it need not be cleaned by man after power off. It is often used for removing iron to protect the important equipment in the steel and cement plants. Standard packing
íñthe magnetic circuit is designed by the computerization imitation and the magnetic depth is deep, the magnetic force is strong. íñthe inner adopts special resin to pour with wholly sealed structure that can be dustproof, rainproof, rotproof. íñautomatically iron-cleaning, easy maintenance, the drum shape structure, special designed wholly sealed structure to help the equipment run in long period without any fault. íñthe robust performance, well-found rectification, manual and remote control, satisfying the requirements of many occasions. íñit can be used to remove 0.1-35kgs ferromagnetic material from non-magnetic material effectively. Standard packing
Magnetically-shielded coil designed specially to advance oil circle to reduce the coil temperature. The coil insulation level can reach f using new heat-conducting oil, oil route designed reasonable, cycle quickly, heat released efficiently. The cooling coil completely sealed by oil, dustproof, moistureproof and anti-corrosion. The wing type thermal fin to enlarge the area of heat dissipation. The temperature can be controlled
Supplier: Cast iron skulls, cast iron borings and turnings, steels skulls, eaf skulls, plate iron, mill scale, metal scrap, incinerated scrap (e46)
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
