A ceramic plunger pump is a type of pump that uses a ceramic plunger (or piston) to transfer fluid or other materials. These pumps are known for their durability, efficiency, and ability to handle challenging fluids, especially in applications where high-pressure, high-abrasion, or corrosive environments are common.
Key Features of Ceramic Plunger Pumps:
Ceramic Plunger:
The core of the ceramic plunger pump is the ceramic plunger itself. Ceramic materials, such as alumina (Alâ??Oâ??), are used for the plunger because they are exceptionally hard, resistant to wear, and can withstand high temperatures and pressures.
Ceramics offer superior resistance to abrasion, which is ideal for pumping fluids containing solids, slurry, or other abrasive materials.
Model Number TWS600S PLUNGER PUMP Pressure High Pressure 15000PSI Power Hydraulic Product Name TWS600S PLUNGER PUMP FLUID END Plunger Size 3, 3.5, 4, 4.5 Condition new. stock
UHP Triplex Plunger pump
Element plunger pump.
Product Specification Power Range : 1.0 HP to 2.0 HP Operating Speed : 0 - 3100 RPM DC Power Range : 900 Wp - 2000 Wp DC Voltage Range : 70 Vmp - 110 Vmp Head Range : 30 Mtr - 90 Mtr Discharge Range : 8000 LPD - 30000 LPD Type of Duty : S1 - Zero Running Cost - Less Maintenance - Eco-Friendly - Simple Installation - Pollution Free Material Of Construction - Motor Part Grade Mechanical Seal : Graphite Ceramic Motor Shaft : Stainless Steel Motor Body Pipe : SS-304 Lower Hosing : Aluminum Diaphragm : High Nitrile butyl rubber Top Cap : Stainless Steel Bottom Plate : Stainless Steel End Cap : Stainless Steel MATERIAL OF CONSTRUCTION SCREW (HELICAL) PUMP Part Grade Outlet : SS-304 Suction : SS-304 Outer Shell : SS-304 Rotor Screw : Stainless Steel Stator : Rubber Coated Alloy MATERIAL OF CONSTRUCTION â?? CENTRIFUGAL PUMP Part Grade Check valve housing : SS-304 Check valve : PC Suction : SS-304 Outer Shell : SS-304 Impeller : POM Bowl : PC Pump Bush : NBR Pump Sleeve : Stainless Steel Pump Shaft : Stainless Steel Coupling / Pump Couple : Stainless Steel
Monoblock pumps - Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features - High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP - Specially designed for wide voltage operation - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life - Back pull-out design for easy servicing and repair - Double shielded ball bearings, so no need of external lubrication - All Model fitted to Mechanical seal. specification - Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 32 Mtr. - Maximum Flow Rate : 940 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Method of Starting : Permanent Split Capacitor (PSC) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm) characteristics of clear cold water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : EN-8 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Plastic
Hand operated grease plunger pump suitable for NLGI000#,00#;0# grease.
The fracturing pump fluid end blocks and spares are 100% interchangeable to BJ, Gardner Denver, Halliburton, Serva, FMC. We can supply the Spare Parts for the Pump Models as follow: HQ 1400 4â?? fracturing pump SPM2000-5" fluid end HQ-1400/2000 Frac Pump Fluid End Asembly SPM-TWS 600 Triplex Plunger Pump SPM QWS2500 Quintuplex Plunger Pump Compatible TWS-2000/2250 Frac Pump Fluid End Assembly Halliburton HT400 plunger pump Serva TPA600 pump SERVA pump: TPA-400 plunger pump . TPA-600 plunger pump. TPB-600 plunger pump. TPA-400 plunger pump GD-2500 Quintuplex Plunger Pump Compatible OPI 1800AWS Frac Pump Compatible
brands: rexroth, HAGGLUNDS, AVENTICS, Danfoss, Parker, MOOG, sunhydraforce, EOWARDS, Leybold, INFICON. Products: plunger pump, solenoid valve, gear pump, vane pump, direction valve, servo valve, proportional valve, hydraulic valve, hydraulic pump, etc
Metering Type Plunger Pumps: Application: Oil & Gas, Chemical, Detergents, Cosmetics, Food & Beverages, Fertilizers, Nuclear, Reactors, Water Treatments, ETP & STP, Paints, Steel, Textiles, Paper, Pharmaceutical, Power, Petroleum, Mine, Institutes, Hospitality, Consultancy Agencies.
