Cold Pressing Coupler

The parameter of the cold extrusion coupler Size 16-40 The material of the cold extrusion rebar coupler is No.20 steel. Cold pressed coupler Directly use it to press connection point with screwless couplers to link the two rebar.

Rebar Cold Extrusion Technology The Cold Extrusion Machine is made up by a hydraulic Clampy with Cold Pressing Dies and Hydraulic Oil Pump.� Only 1 â?? 3 kw power of oil pump, which is not limited by power capacity, has flexible structure and suitable for operation on several machines. Advantages: No professional and experienced worker needed, able to connect changed steel bar of different diameters. Save 80% of connector steel consumption. Only needs 1 3m to stamp each connector, which is about ten times faster than ordinary welding. No flammable gases, not affected by rainy or cold weather. Relieve congestion of the connecting point, facilitated concrete pouring.

The features of this technology: 1.Strong intensity connector, stable and reliable; no specific requirements on the weld ability of the rebar; 2.Only needs 1-3m to stamp each connector, which is about ten times faster than ordinary welding; 3.Only 1-3 kw power of oil pump , which is not limited by power capacity, has flexible structure and suitable for operation on several machines; YJ650 stamping equipment 4.No flammable gases, not affected by rainy or cold weather; 5.Relieve congestion of the connecting point, facilitated concrete pouring; 6.No professional and experienced worker needed, able to connect changed steel bar of different diameters; 7.Save 80% of connector steel consumption. The technology is assessed by the Ministry of Construction as "world advanced, high quality, high efficiency, safe, and economical thick diameter distorted steel bar connection technology which can be widely used in the construction industry." Cold Extrusion Application Principle: 1.Place it well at the working point. 2.Directly use it to press connection point with screwless couplers to link the two rebar.

Casing with a separate power supply unit power supply of hydraulic tools to squeeze on steel. The final connection ensures a tensile strength of at least 125% of the nominal yield strength of the reinforcement grade 500 MPa.

Introduction for hydraulic oil press : Small oil press machine manual operation , low price, widely used in family and small oil factory. This hydraulic oil press machine is suitable for cold pressing or hot pressing many oil seeds , Especially for pressing sesame, pine nut, walnut, and so on valuable oil seeds. Full automatic hydraulic oil press is a small oil press which is most convenient in operation, highest yield efficiency, as well as least replacement spare parts. Only one hydraulic oil press machine, you could get the better oil and easy to operate. Structure of hydraulic oil press machine 1.Main engine:Main engine includes base, upright, top plate, oil drip pan nut and so on , it is one of the main parts. Firstly the oil material is put into the assembly of the press boring ,then it being droved up by the oil cylinder piston ,oil will outflow from the gap of press boring ,and then pass the oil drip pan to the drum for oil storage. 2.Hydraulic System :Hydraulic system is the main power force of this machine, it includes transmission shaft, turbine, worm gear, gear pump, high pressure pump, overflow valve; super high pressure safety valve; hand-operated valve; seamless steel tube; pipeline connect and other spare parts. This machine adopts the advanced power pack of the world, and compared with two plunger pump, it is faster , higher pressure and can resist higher temperature, it can continue working when the oil temperature is above 65 but neednt cooling unit. 3.Electronic system:Electronic system is the most advanced part of this machine, it is fully automatic, easy to operate, and theres no special request to the operator, so this machine is particularly suitable for peasant. This machine is composed of motor, volt meter, pressure gauge, power insurance and so on.

Rebar range 16-40mm, No limitations on the type, composition, or weldability of steel bars, it's widely used in bridge construction.

Material: 20# steel Thread Angle: 60 / 75 Thread Pitch: 2.5P / 3.0P Jing xian Heng Xiang Rebar Connection Equipment Factory is engaged in reinforced steel bar connection and products processing. specializing in rebar thread rolling machine and steel bar rebar couplers in Hengshui city, China. We mainly deal in parallel thread rebar coupler, cold extrusion rebar coupler, grout filled coupler, rebar thread rolling machine, cold extrusion machine and rebar cutting machine. Also deal in torque wrench, thread rolling die, GO-NO GO fixed gauges (plug gauge/ ring gauge)

Right Angle Coupler (Forged & Pressed) Scaffolding Fittings Code No. JSI -32

Technical data for kyps 80 4 set of kyp 20 cold oil press Capacity : 800 kg/ day Electrical voltage:110/220/380v 50 hz Motor power:4x1, 1kw Heat power:4x230 watt Temperature control:0-100 celcius degree Nozzles diameters:4mm , 6mm, 8mm Includes; table, conveyor worm and silo Technical data for kyps 80d 4 set of kyp 20d cold oil press Capacity : 300-800 kg/ day Electrical voltage:110/220/380v 50 hz Motor power:4x1, 1kw Heat power:4x230 watt Temperature control:0-100 'c Includes; table, conveyor worm and silo Technical data for kyps 180 4 set of kyp 45 cold oil press Capacity : 1800 kg/ day Electrical voltage:110/220/380v 50 hz Motor power:4x2, 2kw Heat power:4x230 watt Temperature control:0-100 'c Nozzles diameters:4mm , 6mm, 8mm