Product model: plum blossom 35-40-50mm
Product Name: quincunx cushion block concrete spacer, Concrete Block Spacer , Square Gray Cement Cover Block
Product specification: the thickness of protective layer can be 35mm or 40mm or 50mm
Product color: Cement ash
The company specializes in the production of concrete cushion blocks, high-speed railway cushion blocks, cement cushion blocks, bridge cushion blocks and reinforcement protective layer cushion blocks, which are widely used in the construction of high-speed railways, subways, tunnels, expressways, bridges, airports, wharfs, civil buildings and other projects.
Summary of high strength concrete cushion blocks:
1. High cushion block strength
It is made from a special formula through long-term test. The compressive strength reaches 60MPa and is not easy to break. Its practicability is greatly high
Apply to cushion blocks of other materials.
2. The materials with high durability are the same as that of concrete, with strong adhesion, consistent expansion coefficient and even steam
There is no gap during curing, which can be fully integrated with concrete and effectively prevent air, rain, sea water, etc
The reinforcement corrosion caused by penetration and the concrete falling off, without the worry of mortar and plastic cushion block, greatly improves the reinforcement
Durability and safety of concrete.
3. The protective layer is highly accurate
The high-strength concrete cushion block has accurate overall dimensions and is engraved with the steel seal of the height of the protective layer, which is completely different from the mortar cushion
Randomness of blocks.
4. No color difference after demoulding
Small contact surface between cushion block and formwork, high stability, no "patch" after demoulding, consistent overall feeling, especially suitable for
Fair faced concrete structure.
5. Low total alkali content
The use of environmentally friendly materials and low total alkali content.
6. Low cost
7. The construction is simple and fast
HEBEI YIDA UNITED MACHINERY CO.,LTD., China's Top level-headed & professional manufacturer of rebar coupler and Upset forging machine, parallel thread cutting machine, thread rolling machine and taper thread cutting machine, cold extrusion machine, steel bar hydraulic grip machine, cutting tool, rollers as well as anchor plates since 1992.
  Achieved ISO 9001:2008 strictly quality control system certification, and also achieved UK CARES Quality Management System Certification of BS EN ISO 9001. Annual coupler production capacity reaches a leap from 120,000 to 15 million pcs.
  Performance great by numerous of Important and National Projects, like Pakistan Karachi Nuclear Power Plant, Guinea Hydro power Plant, HK-Macao-Zhuhai longest cross-sea bridge, Ivory Coast Soubre Hydropower Station, and so on.
HEBEI YIDA UNITED MACHINERY CO.,LTD., China's Top level-headed & professional manufacturer of rebar coupler and Upset forging machine, parallel thread cutting machine, thread rolling machine and taper thread cutting machine, cold extrusion machine, steel bar hydraulic grip machine, cutting tool, rollers as well as anchor plates since 1992.
� � Achieved ISO 9001:2008 strictly quality control system certification, and also achieved UK CARES Quality Management System Certification of BS EN ISO 9001. Annual coupler production capacity reaches a leap from 120,000 to 15 million pcs.
Performance great by numerous of Important and National Projects, like Pakistan Karachi Nuclear Power Plant, Guinea Hydro power Plant, HK-Macao-Zhuhai longest cross-sea bridge, Ivory Coast Soubre Hydropower Station, and so on.
1.Introduction
Hebei Yida Anti Impact Rebar Coupling system is a mechanical rebar splicing system, be made of high quality alloy steel. It has already passed the High Speed Tensile test of Anti instant impact by Germany Berlin BAM Laboratory. It has been widely applied at the sites where required high level of resistance to impact. The coupler sleeve will be perfect connected with rebar by cold swaged deformation in the application, and dual couplers will be connected by a high strength bolt.Its size can be from 12mm into 40mm different diameter bars.
Special Advantages
1Each rebar is connected by cold swaged with a coupling, It was processed by large-tonnage hydraulic machine and unique split mould to ensure high quality and reliable radial deformation swage.
2Rebar sleeve bond press is done prior to site connection saving precious site time.
3The two sleeves are connected through a high-strength bolt, quality ensured.
4Installation on site is easy and fast, even in dense cages. No X-ray check is needed and installation can be done in any weather conditions.
5No thread cutting, no need heat or pre-heat on rebar, hence the rebar retains its original characteristics after splice.
6The Yida ACJ rebar coupling system stands complex or full tension as well as full compression state.
Hebei Yida Hydraulic Grip System Anti Impact Rebar Coupling system is divided into the following types
1ACJ Standard Coupler
2BCJ Transition Coupler
3FCJ Positive and negative Thread Coupler
4KCJ Adjustable Coupler
5MCJ Anchorage Terminator Coupler
HEBEI YIDA UNITED MACHINERY CO.,LTD., China's Top level-headed & professional manufacturer of rebar coupler and Upset forging machine, parallel thread cutting machine, thread rolling machine and taper thread cutting machine, cold extrusion machine, steel bar hydraulic grip machine, cutting tool, rollers as well as anchor plates since 1992.
� � Achieved ISO 9001:2008 strictly quality control system certification, and also achieved UK CARES Quality Management System Certification of BS EN ISO 9001. Annual coupler production capacity reaches a leap from 120,000 to 15 million pcs.
� � Performance great by numerous of Important and National Projects, like Pakistan Karachi Nuclear Power Plant, Guinea Hydro power Plant, HK-Macao-Zhuhai longest cross-sea bridge, Ivory Coast Soubre Hydropower Station, and so on.
HEBEI YIDA UNITED MACHINERY CO.,LTD., China's Top level-headed & professional manufacturer of rebar coupler and Upset forging machine, parallel thread cutting machine, thread rolling machine and taper thread cutting machine, cold extrusion machine, steel bar hydraulic grip machine, cutting tool, rollers as well as anchor plates since 1992.
� � Achieved ISO 9001:2008 strictly quality control system certification, and also achieved UK CARES Quality Management System Certification of BS EN ISO 9001. Annual coupler production capacity reaches a leap from 120,000 to 15 million pcs.
Performance great by numerous of Important and National Projects, like Pakistan Karachi Nuclear Power Plant, Guinea Hydro power Plant, HK-Macao-Zhuhai longest cross-sea bridge, Ivory Coast Soubre Hydropower Station, and so on.
As an important parallel thread connection technology, the upset forging parallel thread connection technology posses following advantage:
1, Wide working range: adaptable for �¦12mm-�¦50mm same diameter, different diameter,
bending, new and old, advance covered up rebar of GB 1499, BS 4449, ASTM A615 or ASTM A706 standard.
2, High strength: stronger than the reinforcement bar and guarantees bar break under tensile stress(tensile strength of bar joint =1.1 times of barâ??s specified tensile strength). It can satisfy the requirements stipulated in the Chinese standard JGJ107-2003, JG171-2005.
3, High efficiency: upset forging and threading one joint only needs no more than one minute, and handy operation and quick link.
4, Environmental protection and economy profit: no environment pollution, can work all day, not affected by weather, economize energy source and bar material.
BTS Parallel Chaser is a main spare parts of BTS Parallel Thread Cutting Machine.
Specificate: Pitch 2.0mm,2.5mm,3.0mm,3.5mm,4.0mm,4.5mm for your application.
Using Life:
The BTS parallel chaser is long using life,
For ASTM G60 Grade rebar processing thread quanttiy reference:
16-20mm Steel Bar : One set BTS Parallel Chaser can produce 2500pcs head.
22-25mm Steel Bar : One set BTS Parallel Chaser can produce 2000pcs head.
28-32mm Steel Bar : One set BTS Parallel Chaser can produce 1500pcs head.
36-40mm Steel Bar : One set BTS Parallel Chaser can produce 1200pcs head.
Direct Rolling Roller
It is a main spare parts for Steel bar Direct Rolling Machine
Specification:
E,F,G,H for 60 Degree
XE,XF,XG,XH for 70 Degree
