Dead End Clamp

Place of Origin -Hebei, China Product Name -Dead End Clamp Certificate -CE,IS9001,test report OEM/ODM -Offer Cable Size -4X16~50mm2

Supplier: Transformers, Dead End Clamps

Dead end grip for OPGW Component Inner armor rods, outer armor rods, thimble, U-shaped hanging loop, Extensioe Rods, bolt, nut, etc. Characteristic 1. Stress is distributed equally, without stress focus. It can protect optical cabl-es very well. 2. Under the condition of not exceeding the intensity of cable's side pressure, it has higher grip power for the cable, and can support higher tensile force. 3. The grip power for the cable is not less than 95% of rating's pulling resisting intensityof the optical cable, completely satisfying the needs of setting up the cable. Conditions For The Usage 1. Terminal poles/towers; 2. Corner poles/towers; 3. Dead-end poles/towers; Intensity According to the requirement of customers, 30kN, 70kN, 100kN, 120kN, etc, can be supplied. Select Chart Model Grip(KN) Length of Inner Armor Rods(mm) Length of Outer Armor Rods(mm) Estimated Weight(KG) Color ONZ-60-* * 60 1900 1500 2.9 Yellow ONZ-70-* * 70 2000 1600 3.5 Yellow ONZ-80-* # 80 2200 1700 4.2 Yellow ONZ-90-* # 90 2400 1800 4.3 Yellow ONZ-100-* # 100 2500 1900 4.5 Yellow ONZ-120-* # 120 2600 2000 5.0 Yellow Note: representing the outer diameter of the optical cable (mm).

Supplier: Low voltage & medium voltage current transformers, 11 kv to 33kv dropout cutouts, dead end clamps (osprey & dog conductors

Supplier: Low voltage current transformers, 11 kv medium voltage current and potential transformers, 11kv to 33kv dropout cutouts, dead end clamps

Supplier: Cable fittings, suspension clamp, splicing fittings, dead end clamp, strain clamp, braid wire, insulated piercing clamp, aluminum alloy strain, aluminum alloy strain clamp(1 bolt), aluminum alloy strain clamp(2 bolt), aluminum dead end clamp, anchoring clamp, bi metal connector, bimetallic cable lug, cto aluminum connector, copper braid wire, copper jointing clamp, copper and aluminum braid, double hole aluminum and copper cable lug, insulated dead end, jbt copper parallel groove, pal insulated dead end clamp, tinned copper braid wire

OEM ADSS Tension Clamp Pre-twisted tension clamps are also known as pre-twisted dead-end or dead-end cable clamps for communication ADSS fiber, OPGW cable or OPPC. Pre-twisted dead end is a tension clamp that plays an important role in ADSS/OPGW transmission lines. Dead-end fiber optic cable clamps are used to connect ADSS/OPGW/OPPC to overhead towers or poles. The unique design of the pre-fabricated tension clamps not only simplifies installation, but also ensures a secure cable connection. Dead-end cable clamps provide superior performance in protecting ADSS/OPGW/OPPC cables from stress point damage and preventing signal degradation during transmission. Pre-twisted tension clamps and pulling dead-end cable clamps used on conductors and ground wires are similar in appearance, but the specifications, raw materials, and strength requirements of the two types of pulling dead-end cable clamps are quite different. Although there are different design standards in different countries, we can make OEM according to customers' requirements.

OPGW Preformed Double Tension Clamp Preformed tension clamps are also named preformed dead-end or dead-end cable clamps for communication ADSS fiber, OPGW cable or OPPC. A preformed dead end is a tension wire that has an important role in ADSS/OPGW transmission lines. Dead-end cable clamps are designed to connect ADSS/OPGW/OPPC to overhead towers or poles. Preformed Tension Clamp Preformed tension clamps are also named preformed dead-end or dead-end cable clamps for communication ADSS fiber, OPGW cable or OPPC. A preformed dead end is a tension wire that has an important role in ADSS/OPGW transmission lines. Dead-end cable clamps are designed to connect ADSS/OPGW/OPPC to overhead towers or poles. The unique pre-formed tension clamp design not only simplifies installation, but also ensures a secure cable connection. Dead-end cable clamps provide superior performance to protect ADSS/OPGW/OPPC cables from stress point damage and prevent signal degradation during transmission. Pre-formed tension clamps for conductors and grounds are similar in appearance to pulling dead-end clamps, but the specifications, raw materials and strength requirements of the two types of pulling clamps do differ significantly. Although there are different design standards in different countries, we can OEM to customer requirements. As an experienced manufacturer and supplier of preformed tension clamps, Seinei understands the standards, the manufacturing process and understands your needs. If you have any questions, please feel free to contact us.

Strain Clamp Overhead Line Fittings Power Line Hardware Specifications: Strain clamps are used to fix conductors and ground wires to insulators or link fittings to tower arms and substation structures. There are two basic systems of strain clamps, 1. Detachable clamps, such as wedge-type tension clamps, thimbles, bolted type tension clamps, which allow for subsequent adjustment. 2. Non-detachable clamps, such as compression dead-end clamps which require absolute matching to the conductor length. The type of strain clamps are including NLL-1, NLL-2, NLL-3, NLL-4 and so on.