Meivalve company providing products including wellhead equipment and christmas tree, choke and kill manifold, mud manifold, casing head, tubing head, fracturing head, all kinds of high pressure valvesï¼?high pressure swivel joint, hammer union. Main products products are performing API 6A 16C standard, and can provide special product customization service according to customer's requir.
Description
The plug valve is an important part to connect the high-pressure manifold during cementing and fracturing operations and is also suitable for the control of other high-pressure fluids. The end of the plug valve is connected by the hammer union plug valve, LP internal thread connection and LP external thread connection. At the same time according to customer requirements to design a base high-pressure plug valve; Plug valve is mainly composed of the valve body, sealing arc slice, plug and other parts; Plug valve specifications are 1", 2", 3", cold working pressure 42Mpa (6000Psi), 70Mpa (10000Psi), 105Mpa(15000Psi) three grades, can be used at room temperature, low temperature and sulfur gas conditions and repair kit.
The low-torque plug valves designed and manufactured by our company are all forged from high-quality high-strength alloy structural steel. The materials used are in full compliance with ASTM and AISI standards, and the product specifications are in full compliance with API Spec 6A. The plug valve manufactured by our company has a specification level of pls1-3 and a performance level of pr1-2, which can be interchanged with similar products of SPM and is widely used in cementing equipment and fracturing equipment.
High pressure plug valve produced by our company is designed for a wide range of standard and sour gas drilling production and well servicing appliancation with maximum pressure up to 15000psi. This kind valve features a compact structure, low torque,quick open/and close an easy operation. They are mostly applied on various oilfield manifold. -Main parts include body, bonnet,plug,segments and hand wheel. -Cylinder-shaped metal to metal sealing surface between plug and segments ensure reliable working performance. -Regular end connection is fig 1502M* F nions which can be customized per request. -Valve shall succesfully complete hydro test prior to delivery. features: 1) Plug valves, forged of quality high strength alloy steel, are low torque valves based on the technologies introduced from SPM. 2) 1",2"and 3" plug valves with rated working pressure of 6000,10000,15000 psi(42,70,105MPa) are available. 3) They can work in normal temperature, low temperature or H2S environments. Design features: 1.End connection of plug valve with sizes in English system maybe union or male/female thread (LP,TBG)and they can be freely connected with products in international market 2.Maintenance and repair of valve body can be done without removal ,and no special tools are needed for removal 3.The plugs have very good sealing performance Visible :there is a visible positioner where we can see fi valve is open or closed .Brake spring will limit the position of valve Applications: Fracking Cementing Well Service Processes: Well completion
SJD Trading is exclusive agency of FireSafeTec GmbH in China and licensed distributor in Asia. * FireSafeTec is a German based company with all parts made in Germany, high performance & reasonable price * For 30 years, FST specialize in development. designing and manufacturing flame arresters. breathe valves * Our products are widely used in petroleum, chemical pharmaceutical industries and filling station ect explosive areas. * All products are certified by a third party IBExU as per EC Directive 94/9/EC and approved to meet CE conformity. * FireSafeTec are long-term business partners with German Siemens and ABB ect world top 500 Explosion Group: IIA1 MESG>1.14mm Nominal Diameter: 2" to 3" Material: metal foil element: stainless steel housing: ductile iron stainless iron Coating: galvanised or painted
Plug Valves are used to control flow opena and close. valve bodies are die-forged from premium alloy steel and heat treated to ensure the strength. plugs and seal segments are machined from heat treated alloy steel with special surface treatment to ensure reliable sealing capacity. Compact structure, easy operation and maintenance. Union connections on both ends. Available with manual, handwheel and hydraulic actuators with limiter switches. Valves can be serviced without removing from the line. Plug valves for standard service range are available in 1 " to 4 " bore sizes and 6,000psi to 20,000psi rated pressure. We has also developed plug valves for H2S service in accordance with NACE MR0175 criteria with 1 " to 4 " bore sizes and 10,000psi to 15,000psi rated pressure. JASON provides a customized design to meet each customerâ??s unique requirements. Recommended service: Fracturing, cementing,acidizing and testing lines
Industrial Valve Like: Ball Valve, Gate Valve, Globe Valve, Check Valve, Butterfly Valve, Sluice Valve, Air Valve, Plug Valve as per Engineering Standard
Product : Valves Brand : Renaissance Pipe Fitting Inc. Sizes : Refer the specification Condition : New Rating : 4.6, based on 112 reviews price : Start from 5 USD RFP India is Indias wellknown manufacturer supplier and exporter of Valves which is a device that regulates directs or controls the flow of a fluid gases liquids fluidized solids or slurries by opening closing or partially obstructing various passageways Valves are technically valves fittings but are usually discussed as a separate category In an open valve fluid flows in a direction from higher pressure to lower pressure It is being made up from different materials like Stainless Steel Carbon Steel Alloy Steel Gun Metal Brass Bronze Forge Cast Iron Cast Steel and Mild Steel Meanwhile Valves are quite diverse and may be classified into a number of basic types such as Ball Valve Butterfly valve Ceramic Disc valve Check valve Choke Valve Diaphragm valve Gate valve Globe valve Knife Valve Needle Valve Pinch Valve Piston Valve Plug Valve and so on
2" 105MPa Fig1502 Low Torque Plug Valve Product Description The API low torque plug valve is a necessary part that is utilized on the high pressure manifold for the cementing and fracturing operations in oil field and also suitable to control over the similar high pressure fluid. Featuring the compact structure, easy maintenance, small torque, rapid opening and easy operation, the plug valve is ideal for the cementing and fracturing manifolds. The API low torque plug valve consists of the valve body, plug cap, plug and etc. The plug valve is available with the union 1502 inlet and outlet preparations(also available upon customer request). The cylinder body inner wall and side segments work together with the rubber seal segments to provide sealing. The metal to metal sealing is available between the side segments and cylinder plug, featuring high precision and reliability. The valve can be easily opened or closed even under the 10000psi high pressure.
Areas where highly corrosive materials are used in the chemical process and plants. Industries where the critical application like food, pharma and fine chemicals. To control environment pollution. FEATURE Best quality in class with excellent performance. Excellent corrosion resistance to the chemicals. Maintenance Free/Long Service life cycle/Easy Installable, ensuring cost reduction in production and maintenance. QUALITY CONTROL High Voltage electric spark test-all lined components. Standard Hydraulic Test (15 kg/cm') of Body and seat (10 kg/cm³) Virgin lining materials used-FEP/PFA. Size: 25 NB to 150 NB LINNING Thickness Spark Test Type Service Temp. : 3.0 to 3.5 mm Mini. Over all wetted parts. : 15k.v.D.C. : Teflon FEP/PFA : Teflon (FEP) Max-160'C : Teflon (PFA) Max-205'C
High Pressure Low Torque Plug Valve Product Description These Plug Valves are designed to meet the needs and requirements of the oilfield. They can withstand the high erosion rates and pressures encountered in today's operating environment. Working Principles and Features: The plug valve consists of the valve body, plug cap, plug and etc. The plug valve is available with the union 1502 inlet and outlet preparations (also available upon customer request). The cylinder body inner wall and side segments work together with the rubber seal segments to provide sealing. The metal-to-metal sealing is available between the side segments and cylinder plug, featuring high precision and reliability. Technical parameter Product Name API 6A high pressure plug valve Material Class AA-EE Working Media crude oil and natural gas Standard API 6A Pressure high pressure Brade Ruier Processing Type forging Performance Requirement Pr 1-2
Lake Petro provides API 6A standard Plug Valve with standard Male and Female end connections, and a standard service rating up to 15000psi NSCWP. Plug valve provides flow control for oilfield applications such as cementing, fracturing, aciding, coiled tubing, sand control, and manifold trailers. Manual and Hydraulic operation available for standard and sour gas application. To meet the level standard of PLS3 and PR2, and can be interchangeable with SPMâ??s products. Lake Petro low torque and high pressure plug valve are made of high quality and high strength structural alloy steel. Strict heat treatment ensures even metallographic structure and loading capacity. The materials completely conform to USA ASTM and AISI standards and to be produced according to API Spec 6A. The connection available in LP thread, Tubing thread, butt weld, and non-pressure sealing end. Specification Size: 1â?? Plug Valve Low Torque (1 x 1) Male x Female FIG1502 1â?? Plug Valve Low Torque (1 x 2) Male x Female FIG1502 2â?? Plug Valve Low Torque (2 x 2) Male x Female FIG1502 3â?? Plug Valve Low Torque (3 x 3) Male x Female FIG1502 Cold working pressures: 42Mpa (6000Psi), 70Mpa (10000Psi), 105Mpa (15000Psi). Connection type: hammer union (Fig.602, Fig.1002, Fig.1502 MXM, MXF, and FXF), LP female thread and LP external thread and the plug valve with bottom base can be designed upon the clientâ??s request. Plug Valve Repair Kit Interchangeability Plug valve repair kits can be provided for standard service, or low temperature and sour gas condition. These repair kits are replaceable and interchangeable for Weir SPMâ?¢, FMCâ?¢ 2â?? and 3â?? DR plug Valve, which is including plug, seal segment, side segment, elastomer seals, and grease fittings
