Swc Ch Type Long Telescopic Welding Integral Fork Head Cross Shaft Universal Coupling Basic Parameters And Main Dimensions (GB5513-91) Model Turning Diameter  D (mm) Rated RorqueTn (kN*m) Fatigue Torque  T. (kN,m) Axis Angle( ) SWC180CH1 180 12.5 6.3 W25 200 925 155 105 114 110 8-17 17 5 0. 181 0. 0070 74 2.8 SWC180CH2 700 1425 0.216 104 SWC225CH1 225 40 20 W15 220 1020 196 135 152 12( 8-17 20 5 32 9 0. 561 0. 0234 132 4.9 SWC225CH2 700 1500 0. 674 182 SWC250CH1 250 63 31.5 W15 300 1215 218 150 164 140 8-19 25 6 40 o r 1.016 0. 0277 190 5.3 SWC250CH2 700 1615 1. 127 235 SWC285CH1 285 90 45
Ground Joint Hose Couplings are designed for compressed air, steam Ground Joint Hose Couplings are designed for compressed air, steam, or fluid hose service where higher working pressure and increased coupling retention are required. A hammer type female swivel nut with coarse thread allows for quick attachment and release. A spud adapter converts this coupling to pipe thread. The ground joint hose coupling set is a three piece system featuring a hose shank, over-sized female swivel nut, and spud adapter. Ground Joint Couplings are available in a larger size range than many other hose coupling styles. The female swivel features a special coarse thread and over-sized hammer lugs that quickly seal the coupling tight against its special polymer seal (similar to a hammer union). Threaded spud adapters in male NPT, female NPT or double male wing nut thread allow for versatility in configuring hose systems from tool to compressor, manifold, and piping systems. While a gasket seal version is also available, most parts do not interchange. All parts on this site feature the built-in ground joint seal. bolted interlocking clamps secure the ground joint hose coupling shank to heavy wire braid bull air hose, wire braid steam hose, or fluid transfer hose. Using band type hose clamps will reduce the working pressure of the hose assembly and decrease shank retention. Ground Joint Coupling Wing Nut (Ground joint fittings are designed for high pressure air or water (ie. Up to 500 psi) as well as steam (steam maximum 250 psi @ 450�°F max) in plants, refineries, construction sites, or drilling applications.) Ground Joint Coupling Female SPUd (Ground Joint female spud is included in the female hose coupling set. Purchase additional female spuds to convert additional equipment, pipe, and manifolds to ground joint wing nut thread.) Ground Joint Coupling Hose Stem (Ground Joint Coupling-Hose Stem are to be installed by a fully trained assembler and are designed to be used with interlocking bolt clamps.) Ground Joint Coupling Male SPUd Ground Joint Coupling Double SPUd Ground Joint Coupling Male Stem
Transmission Joint Material: ASTM A331 4140 Weight: 1.1055kg Manufacture process: Precision casting + casting Description: The shaft is an important part of automotive transmission to transmit  dynamic, it together with transmission and drive axle to transfer the power of the engine to the wheels, make the car produces driving force.
Drill pipe joint is processd by 1500T gaint pressure forging machine to ensure the quality of joint for high compactness, cleanness, hard wear resistance, homogenization of excellent mechanical performance.
1, Product Information: Rubber expansion joints are flexible connectors fabricated of nature rubber or synthetic elastomers, steel ring and fabrics, and when necessary, metallic reinforcements provide stress relief in piping systems due to thermal and mechanical vibration and/or movements. ZHW® Rubber Expansion Joints provide relief from stresses caused by thermal expansion and contraction in pipelines. Movement is always experienced in piping systems due to varying ambient temperatures, differences in temperature of materials handled, and differences in composition. Expansion joints absorb this movement and eliminate the danger of buckling or pulling apart with the high replacement costs that would result. 2, Product Advantages: Length of product customization Tough quality and Widely Service Absorption of Vibration, Noise and Shock Wide Range of Flange Materials Available Reduced Turbulence or Material Entrapment Compensation for Misalignment 3, Product Applications: It is extremely suitable for places where there are complex geologic conditions, large sedimentation range and pipes are easy to be damaged due to frequent alternation between heat and coldness in pipes. The elastic slide transfer and deformation of rubber and the heat dispersion of mechanical force may well prevent the physical damages from the displacement of pumps, valves and pipes. As a poor conductor, it is a harmless to reduce the vibration and noise transmission. The product is designed with smooth inner walls, after testing, it is proved to have no any influence on the flow speed and flux of medium, and keeps stainless for ever, accordingly it will be free of maintenance in operation.
Rubber Coupling for Ring Frame Machine Material - Rubber Size - Available in all sizes
Knotter in Winding Machine Material - CRC Sheet
Product Description: 1.Manufacturer 2.Material and specification could be chosen by customer 3.Be available from stock 4.API, TUV...certificate
The coupling sleeve is an indispensable part of rock drilling tools for rock drilling. During the drilling process, the coupling sleeve is at the joint part of the matching drill, which bears the corrosion effect of stress such as axial tension and compression, bending and torsion, contact, and friction. The coupling sleeve used for threaded connection rock drill tools is to use its thread to connect two or more drill rods or shank rods on the same axis, transfer the impact function of the rock drill, and achieve the purpose of drilling rock holes, which is the same as the drill rod. It acts as a stress wave propagation carrier. Coupling sleeve classification 1. Classification by the geometric structure There are straight-through coupling sleeves, reducing coupling sleeves, and middle-stop-type coupling sleeves. 2. Classification by thread structure There are coupling sleeves such as wave thread, compound thread, trapezoidal thread, etc. Product Parameters Coupling sleeve type: full bridge coupling sleeve and reducing coupling sleeve Thread size: R32, R38, T38, T45, T51. For more product specifications, Please email us or leave us a message. 1. We have professional technical, procuring, marketing, order management, and after-sale service teams, which can provide customers with pre-sale technical solution consultation and product selection suggestions, in-sale order management, and after-sale on-site technical guidance and other services. 2. We focus on the field of geotechnical anchorage, always with high standards to do supply chain management, strict requirements to check product quality, and heavy experience to create the whole process of service. 3. We are committed to providing systematic geotechnical anchorage solutions for customers at home and abroad, creating a valuable service experience.
