BA222U is a bead form standard gel strong base Type II quaternary ammonium anion exchange
resin with a styrene-DVB copolymer matrix. It has both high operating capacity and superior
regeneration efficiency. This resin provides greater resistance to organic fouling than Type I
strongly basic exchangers. It is suitable for the incoming water containing high level of mineral and
organic substances. BA222U can be used in all types of demineralizers.
BA700OH is a standard gel strong base type I quaternary ammonium anion exchange resin with a styrene-DVB copolymer matrix. It has both high operating capacity and the ability to achieve low residual silica levels. BA700OH anion exchange resin is intended for use in all types of deionization systems and chemical processing applications. The anion exchange resin is mainly used in the preparation of pure water, waste water treatment and separation of biochemicals. It is supplied in hydroxide form. It can also be used for mixed bed system.
BA222OH is a bead form standard gel strong base Type II quaternary ammonium anion exchange resin with a styrene-DVB copolymer matrix. It has both high operating capacity and superior regeneration efficiency. This resin provides greater resistance to organic fouling than Type I strongly basic exchangers. It is suitable for the incoming water containing high level of mineral and organic substances. BA222OH can be used in all types of demineralizers.
BC121 is a bead form polystyrene sulphonate cation exchange resin containing 8% DVB. It has excellent physical and chemical properties such as high capacity and operating capacity, lower pressure drop, well physical and chemical stability. The product is supplied in the sodium or hydrogen forms. BC121 is used in all water softening, dealkalization, deionization, preparation of pure water and ultra-pure water, food industry, pharmaceuticals and chemical processing applications.
Bojie offers a large number of ion exchange resins and adsorbent medias suitable for use in the aquarium industry. All Bojie products are suitable for aquarium use with very low levels of toxic leachables. AT700OH is hydroxide form type strong base anion resin with blue indicator dye that changes to yellow as resin exhausts.
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Supplier: Pu foam scrap, memory/ visco foam scrap. rigid foam scrap, pvc foam scrap. pp non woven waste, pvc resin off grade/wet, abrasive garnet, epoxy resin, polyester yarn scrap, raw cotton scrap, quartz ore and sulphur
Services: Distributor of polyurethane trim foam scrap, sulphur, epoxy resin, polyester resin, quartz ore, recycled dacron and abrasive garnet.
Buyer: Pu foam scrap/waste. pu trim foam, polyurethane foam scrap, ldpe/hdpe/pp reprocessed granules, pvc offgrade/ reprocessed/regrind pp non woven scrap, abrasive garnet, quartz ore, sulphur, epoxy resin, polyester resin, and recycled dacron.