The BS - G705 Polyamide Hot Melt Glue Granules are engineered for robust, flexible bonds, these thermoplastic gems are essential in shoemaking and leather goods. From thermofolding to insole binding, trust these granules for professional results.
Chemical Nature: Copolyimide
Physical Specifications:
Softening Point (R&B): 100 - 110 C
Viscosity at 160 C: 3800-4800 mPa.s
Specific Gravity: 0.98 g/cm
Color: Transparent Amber
Mechanical Specifications:
Maximum Load: 10 N/mm
Ultimate Elongation: 15%
Modulus of Elasticity: 250 N/mm
Other Typical Specifications:
Commodity: Dicalcium phosphate Feed Grade
Use
DCP is the feed preparation of raw materials, Animal right to supplement calcium needs. Coarse its products more applicable to the preparation hens, ducks feed, concentrate feed and premix.
Product Nature
Molecular Formula:CaHPO4·2H2O,Molecular weight:172.09,After drying with loose white powdery crystals or granules. Neutral products, the melting acid, water-soluble, hygroscopicity small, heated to 90 around gradually lose water of crystallization.
Product Features
The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 18% of the products, due to a small amount of MCP, and its biological effects better.
This unique high-tech companies use technology to make our products crystallization, high purity and its harmful impurities significantly below standards:HG26362000
Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction.
Coarse particle DCP in the animals stay in the stomach longer and more conducive to the absorption of calcium phosphate, the product of Micro-particle DCP granulation from mechanical, without any chemical binder.
Specifications
Appearance white and gray powder/granule
Total P 18% min
Calcium 21% minÂ
F 0.18% max
As 30 ppm max
Pb 30 ppm max
Packing and Storage
Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.
Chemical name:Magnesium nitrate
Molecular formula:Mg(NO3)2.6H2O
Molecular weight:256.40
Property:soluble in water,liquid ammonia, methanol and ethanol.Stable at room temperature, the relative density of 1.461, higher than the melting point of 95�°C off the water to generate alkaline magnesium nitrate, heated to 300�°C begins to decompose above 400�°C to completely decompose into magnesium oxide and Nitrogen oxide gas.
Quality standard:
Item Indicator
Industrial grade Agriculture grade
Magnesium nitrate (Mg(NO3)2.6H2O) â?¥98.0% â?¥98.0%
PH value â?¥4 ---
Heavy metal â?¤0.002 ---
Water insoluble â?¤0.05% â?¤0.1%
Iron â?¤0.001% ---
Magnesium oxide content(CaO) --- â?¥15%
Nitrogen content(N) --- â?¥10.7%
Use:Concentrated nitric acid for industrial de-water agent, manufacture of explosives, catalysts and other magnesium salts and nitrates catalyst raw materials, wheat ashing agent.Used in agriculture, magnesium soluble fertilizer for soilless culture.
Packing:25/50KGlined with plastic bag and exterior is woven bagPacking or according to customers requirements.
1.Purity 98% white granule
2.Used for fertilizer or industrial material
3.Export Asia/Europe
4.ISO9001
Commodity: Calcium chloride
Molecular formula CaCl2
H.S code 28272000
Product feature
Calcium chloride is an inorganic salt, which exists as solid or liquid. Solid calcium chloride is a white, crystal substance in the form of flake, granule, pellet or powder. With different crystallized water contents, it can be dihydrate or anhydrous.
Liquid calcium chloride is a colorless, clear solution. As calcium chloride has such properties as quick dissolving, exothermic ability, attracting moisture from the air and surroundings, dissolving at very low temperature,
Specifications:
Analysis Item Standard
Calcium chloride (CaCl2) 74%min,77% min,94%min
Total Chlorinated Alkali: (NaCl) 5.0%max
Magnesium Chloride(MgCl2) 0.5%max
Insoluble matter in water 0.25%max
Calcium Sulfate (CaSO4): 0.2%max
Ferric Oxide (Fe2O3) 0.025%max
Heavy Metal as Cu., Pb., Cd., Cr., Hg., As 0.005%max
Application
Mainly used in drying, melting snow for airport express and street, concrete desiccant and concreting fast, removing dust and oil industry.
Exporting Packing :Plastic woven bag with PE ,25kg/50kg/1000kgs net weight or 25kg x 40 bags into one big bag or 40 bags on a pallet with shrink-wrapped
Means of transportation :in containers or by bulk vessel with large quantity
Chemical Name:4-Hydroxybenzoic acid
Trade Name:p-oxybenzoic acid
Molecular Formula:C7H6O3
Molecular Weight:138.12
CAS No.:99-96-7
Properties:white odorless crystalline powder, easily soluble in hot water and alcohols, aethers and acetone,
slightly soluble in cold water and benzene, insoluble in carbon bisulfide; relative density is 1.46
Use: Can be used as antiseptic, intermediate of dyes, pharmaceuticals; as main material of liquid crystal polymers; as material of pesticide intermediate
Specification
Item Specification
Polymer Grade Technical Grade
Appearance white crystal powder white crystal powder
Purity(on dry base) % 99.6 99.0
Melting Point 214-217 212-216
Odor odorless odorless
Solubility Clear and transparent clear and transparent
Loss on Drying % 0.20 0.50
Color(Pt-Co) 10 40
Ash % 0.02 0.15
Sulfate(SO42-) 0.01 0.05
Chloride(Cl-) % 0.005 0.02
Phe% 0.01 0.10
Salicylic Acid % 0.02 0.10
4-Hydroxyisophthalic Acid(HIPA) ppm 500 /
Insolubles in Metha ppm 50 /
Potassium(K+) ppm 5 /
Sodium (Na+) ppm 5 /
Iron (Fe) ppm 5 /
Ca2++Mg2+ppm 5 /
T-558-N is a solid-type fatty polyamide resin especially designed for HOT-MELT
STRUCTUAL ADHESIVE uses. It has superior processing properties for its ready-to-apply nature
due to the lower molten viscosity. Optimum application temperature of T-558-N is in the
range of 180C~200C.
T-558-N shows excellent adhesion onto various types of plastics,
and steel, as well as onto many other surfaces, giving very tough bonding and sealing strength.
T-558-N may be applied either by hand or manually operated by hand-guns.
An automatic dispensing equipment with a nozzle or a wheel applicator may also be benefited.
Calcium chloride is an inorganic salt, which exists as solid or liquid. solid calcium chloride is a white, crystal substance in the form of flake, granule, pellet or powder. with different crystallized water contents, it can be dehydrate or anhydrous. liquid calcium chloride is a colorless, clear solution. as calcium chloride has such properties as quick dissolving, exothermic ability, attracting moisture from the air and surroundings, dissolving at very low temperature, it is widely used in snow & ice melting, dust control, oil & gas drilling, moisture-absorbing
According to the content of crystal water in calcium chloride:
(1). Calcium chloride dehydrate
a. Calcium chloride flake dehydrate 74%min; 77%min;
b. Calcium chloride granule/pellet dehydrate 74%min; 77%min
(2). Calcium chloride anhydrous
a. Calcium chloride powder anhydrous 94% min
b. Calcium chloride pellets anhydrous 94%-97% min
according to grade:
(1). Calcium chloride industrial grade
(2). Calcium chloride food grade
1. Chemical Name: Sodium Pyrophosphate
2. Formula: Na4P2O7, Na4P2O7, 10H2O
3. Molecular weight: 265.90, 446.06
4. Specificity: Colorless or white crystals, crystalline or granular powder. It is easily soluble in water, but is insoluble in alcohol. Density: 2.45, relative density: 2.45, melting point: 890? . The decahydrate effloresces slightly in dry air. pH of 1% solution is about 10.
5. Quality Standard:
6. Usage: It is mainly used as detergent, electroplating . ctFor food grade it is mainly used as emulsifier, buffer, nutrient, sequestrant, texturizer
7. Packing: 25kgs net paper or plastic woven bags.
8. Storage and Transport: It should be stored in a dry, ventilative and clean warehouse kept away from moisture and hot, Furthermore, it should be stored separately from poisonous Substances.
Sebacic acid has a wide range of uses, mainly used to prepare sebacic acid esters, such as dibutyl sebacate, dioctyl sebacate and Diisooctyl sebacate. These esters can be used as plasticizers for plastics, cold resistant rubber, polyamide, polyurethane, alkyd resin, synthetic lubricating oil, lubricating oil additives, spices, coatings, cosmetics, etc. It can also be used as raw material for the production of nylon 1010, nylon 910, nylon 810, nylon 610 and nylon 9, and as raw material for high temperature resistant lubricating oil diethylhexyl ester. It is also the raw material for the production of plasticizer, softener and solvent for alkyd resin (used as surface coating, plasticized nitrocellulose coating and urea resin varnish) and polyurethane rubber, cellulose resin, vinyl resin and synthetic rubber.
Hot selling Sebacic acid Decanedioic Acid with new batch CAS 111-20-6
