Pneumatic Collision Testing Machine

This machine is used to detect the impact damage ability of the product during transportation or use, in order to assess the impact resistance of the product structure, and through the test data, optimize the strength of the product structure, improve the product quality, widely used in aerospace, automotive, mechanical parts and other industries.

The KRD20 series pneumatic bump test machine replaces the traditional mechanical cam-type crash bench and is suitable for repeated impacts on electronic components, equipment and other electrical and electronic products during transportation or working. 1. Fully pneumatic driven, clean and environmentally friendly, good repeatability and high reliability. 2. Control the frequency of collisions by adjusting the gas pressure to achieve continuous high-frequency collisions. 3. Test time and collision frequency can be set arbitrarily, and it will stop automatically after the test is completed 4. The controller has door protection, over speed protection and zero signal protection to ensure the safety of the system. 5. The drop height is adjustable, only need input the overload value; adaptive adjustment of the collision process to ensure the repeatability. Technical Specifications Model KRD20-50 KRD20-100 KRD20-200 KRD20-500 KRD20-800 KRD20-1000 KRD20-1500 KRD20-2000 KRD20-3000 Load (kg) 50 100 200 500 800 1000 1500 2000 3000 Table Size (mm) 500*500 600*600 800*800 1000*1000 1500*1500 1800*1800 2000*2000 2500*2000 2500*2500 Shock Waveform half sine wave Peak Acceleration(g) 3-150 3-120 3-100 3-80 4-60 5-50 5-50 5-40 5-30 Pulse Duration(ms) 2-30 3-30 5-30 6~30 6~30 8~30 11~30 Bump Rate (Times/Min) 1~120 1~120 1~100 1~100 1-80 1~60 1-30 1-20 Overall Dimension (mm) 1050*1050*1300 1050*1050*1300 1100*1100*1300 1200*1200*1500 1300*1300*1600 1350*1350*1600 2000*2000*1850 2500*2000*1950 2500*2500*2100 Weight (kg) 1500 1500 2000 2500 2500 7500 8500 9500 11000 Power Supply AC220V �± 10% 50Hz Air Source 0.8Mpa Working Environment Temperature range 0 ~ 40; Humidity 80% non-condense Standards MIL-STD-810F IEC68-2-29

Pneumatic slotting machine: Pneumatic slotting machine about 20 kg weight, with a pneumatic drive slotted, pneumatic material, the use of very safe, very convenient Equipped with speed angle grinder, double compass slider, manual double folder feeder, slot is very convenient, with the word row hole hole software, the use of more convenient Slotting machine with speed control angle grinder can be used with a variety of blade processing all kinds of sidebelt, tungsten steel blade can open metal sideband, stainless steel sideband will not be black, tungsten steel blade must be transferred to 1000 rpm / Minute (speed adjustable angle grinder 2 files), alloy blade can be used to open aluminum and aluminum coil, the use of angle grinding machine is best not to adjust too fast, easy to fly out of the aluminum side of the waste, Protect the blade! Slotting machine is the depth of the screw bar (fine-tuning), fine-tuning, then it is not easy to damage the blade, you can also better operate the slot machine, better adjust the slot depth! Resin luminous characters are now relatively high prices in the industry, and more high-end a luminous characters, many big brands are using resin words, the following words about the production of resin word: Step one: Now the popular resin word is the first floor and the first edge of the first welding, the floor is carved with a plasma, and then the edge of the welding on it. Step 2: is to be in the top of the word pad a layer of transparent acrylic, transparent acrylic carved out of the floor is slightly smaller, so that you can just set into the set before the acrylic get a few small pieces of acrylic good Position, set a location, stick on the edge, and then to the pad of acrylic, so you can keep parallel, but also easy to do the word, acrylic pad up after the must ensure that the seal, or else the resin will flow to the following. Step three: is the resin panel, and now the domestic resin is 3: 1 saturated resin, paste is more imported, uniform light agent is mostly concentrated, so that the proportion of resin is better control. Resin ratio is like this, with a plastic pot into the resin A (3: 1 resin, large bottles of 6 kg), and then add a light agent (see the mix after the light to see the effect of light, the amount of added, probably With the resin 3% -5%, different amount of uniform agent plus the amount is not the same), and then add the color paste, the proportion of the same color and the proportion of the same agent 3% -5%, and finally add the curing agent (The ratio of the curing agent to the resin is 1: 3). Note: resin mixing time must be uniform, 8 kg loaded each step need to stir for more than 15 minutes, the greater the weight, the longer the mixing time, there are resin when the room must be kept in a clean room, or resin There will be black spots, unsightly, when the night will be particularly evident. -

It is used to measure and determine the impact resistance of products or packages, and to check the functional reliability and structural integrity of test products under impact environment. The impact test of conventional half-sine wave, post-peak sawteeth wave, trapezoidal wave and other waveforms can be performed to realize the impact and impact energy suffered by products in the actual environment, so as to improve the system or optimize the packaging structure of products. The impact test index is: the peak impact acceleration can reach 5000-50000m/s2, and the acceleration duration is 0.2-1ms. The impact test results can be used to understand the impact resistance of their products and the use of environment.

Microcomputer controlled photoelectric detection; With broken pin protection function; Improving the accuracy and benefit of screw teeth Products that can be processed are more 40-50 tablets per minute.

This machine used for clipping meat that can not clip. The structure is piston-rotary spool valve, power is air and Omron PLC control. Spares that touch meat are made of stainless steel. Its features are; high automation, low cost, precision measure and simpleness operation, ect. Dismantle link, it can join to tying machine. This Pneumatic Sausage Filling Machine mostly seal natural and smoke casing that unsuitable clip. This PLC control Sausage Clipping Machine used for clipping meat that can not clip. The pneumatic sausage filling machine has many advantages such as high automation, low cost, precision measure and simpleness operation. Main technical target Model:NDG400 volumn:50kg,108kg suitable casing:natural of smoke casing Raw material:mashing meat or below diced meat Tube length:300mm Number of link:0-3(can adjust) Work efficiency:120/min Overall dimension:1130*660*1440mm Weight:170KG

Pneumatic Lead Forming Machine---Two direction loose radial forming/cutting : AR-106 FEATURES Customized model, Driven by Air With Twin Air-Cylinder, flexible for small and medium lot of components. Suitable for various types of Radial Lead Components such as Crystal, Capacitor, Resistor etc incorporate with tooling. Forming and cutting operation in one step. Compact design and convenience for tooling exchange. SPECIFICATIONS Dimension: L420 x W300 x H200 mm Weight: 8kgs Air Source: 5kgs/cm2

china coal 0001 Introduction of Pneumatic type filling machine for high viscosity liquid and paste 1. Paste /liquid filling machine is suitable for quantitative filling in chemical, food, cosmetic, pharmaceuticals, pesticides,oil and other industries such as liquid, paste, sauce, particles and other substances. 2. Horizontal pneumatic paste filling machine, cylinder, chassis and hopper are made of stainless steel, pistons are made of PTFE, pneumatic parts are imported pneumatic components, compliance with GMP requirements. 3. Filling quantity and filling speed can be adjust, foot switch and automatic filling function, high precision, simple structure and easy operation. Applications of liquid detergent filling machine They are most commonly applicable for pharmaceutics, daily chemicals, foodstuffs, cosmetics, pesticides and other industrials; Typical application: used for filling liquidity is good material, such as filling liquid and paste material, such as water, oil, juice, detergent, sauce, salad, butter, margarine, ketchup, jam, cream, honey, shampoo etc. Suitable for various packing such as bottle, jar, can, cup, bag, barrels, etc; Parameter of Pneumatic type filling machine for high viscosity liquid and paste Modle G1WY-100 G1WY-300 G1WY-500 G1WY-1000 G1WY-3000 G1WY-5000 filling speed 10-35n/min(take water for example filling range  10-100ml 30-300ml 50-500ml 100-1000ml 300 -3000ml 500-5000ml air pressure 0.4~0.6mpa filling erro ±1% machine size 806(L) 180(W) 690(H)m 880(L) 230(W) 665(H)m   880(L) 230(W) 665(H)m 1065(L) 230(W) 690(H)m 1250(L) 400(W) 300(H)m 1390(L) 420(W) 380(H)m weight 42kg 45kg 48kg 52kg 64kg 86kg

Introduction Resistive spot welding (RSW) is a process in which contacting metal surfaces are joined by the heat obtained from resistance to electric current. Work-pieces are held together under pressure exerted by electrodes. Typically the sheets are in the 0.5 to 3 mm (0.020 to 0.118 in) thickness range. The process uses two shaped copper alloy electrodes to concentrate welding current into a small "spot" and to simultaneously clamp the sheets together. Forcing a large current through the spot will melt the metal and form the weld. The attractive feature of spot welding is that a lot of energy can be delivered to the spot in a very short time (approximately 10–100 milliseconds). That permits the welding to occur without excessive heating of the remainder of the sheet. Applications: 1. Mild steel sheet, stainless steel sheet, galvanized metal sheet spot welding. 2. Metal sheet fixing welding before continues rolling seam welding. 3. Welding fan guard (with proper designed fixing and driving system), welding metal art ware, stationery, cook ware. 4. With special made electrode, it can weld small mesh, birds cage, pets cage, condenser and similar work piece. 5. Weld connection parts, the hinge, nuts and bolt welding, low carbon fasteners and stainless fasteners. 6. Welding high conductive material, like aluminum, electrical contact, copper wire etc.(using Middle frequency power) Single plate thickness: 1. Uncoated mild steel sheet: 0.4-4.0mm 2. Stainless steel sheet : 0.5-4.0mm 3. Galvanized steel sheet (hot dip zinc, zinc5% aluminum, zinc55% aluminum and electrolytic ally deposited zinc coated steel sheets): 0.4-2.5mm Our machine features 1. Manufactured in accordance with international ISO Standard. 2. European CCC, ISO,CE Certified 3. European imported Microprocessor Welding Control has transparent safety cover to protect a keypad and has a lock to allow only authorized personnel to access the program. 4. Welding Control maintains main parameters such as welding current; weld time, off time, etc. with digital accuracy. 5. Any of 23 weld schedules can be easily selected for work. 6. Solid machine structure allows you carry out the Projection and spot welding work. 7. Improved water-cooling system guarantees flawless performance in heavy-duty applications. 8. Machine is painted with Lead-Free paint. 9. All materials used in design are environmentally friendly. Machine quality warranty: 1. Provide one year oversea maintenance support. 2. Lifelong free technical support leading time: 15 days after order.