PVDF / FEVE - coated aluminum coil Product Introduction: PVDF paints are featured with excellent performance in alkaline resistance, anti-corrosion and weather resistance. Due to its low tension on surface, PVDF paints are contamination resistant and self-cleaning. They are the first choice for the application of high-end architectures. It can be widely used in exterior environment, the warranty is more than 10~15 years. PVDF Coated Aluminium Coil PVDF Coated Aluminium Coil is a type of fluoropolymer that is used in a variety of applications, including as a coating for metal coils. PVDF coatings are known for their excellent durability, chemical resistance, and UV resistance, making them well-suited for use in outdoor applications and in environments where the coating may be exposed to harsh chemicals or UV radiation. Coil coating is a process in which a thin layer of PVDF is applied to a metal coil, typically made of aluminum or steel. The coil is first cleaned and pretreated, and then the PVDF coating is applied using a variety of methods, such as roll coating, spray coating, or electrocoating. Once the coating has been applied, it is cured using heat or UV light to ensure that it adheres properly to the metal surface. PVDF Coated Aluminium Coil is commonly used in a range of applications, including in the construction industry for building facades, roofing systems, and siding. It is also used in the automotive and transportation industries, as well as in the manufacturing of appliances and other consumer products. PVDF coated aluminium coils are known for their excellent performance characteristics, including high resistance to fading, chalking, and peeling, as well as excellent adhesion to the metal surface. They are also resistant to a wide range of chemicals, making them suitable for use in industrial and commercial environments.
PVDF / FEVE - coated aluminum coil Product Introduction: PVDF paints are featured with excellent performance in alkaline resistance, anti-corrosion and weather resistance. Due to its low tension on surface, PVDF paints are contamination resistant and self-cleaning. They are the first choice for the application of high-end architectures. It can be widely used in exterior environment, the warranty is more than 10~15 years. PVDF Coated Aluminium Coil is a type of fluoropolymer that is used in a variety of applications, including as a coating for metal coils. PVDF coatings are known for their excellent durability, chemical resistance, and UV resistance, making them well-suited for use in outdoor applications and in environments where the coating may be exposed to harsh chemicals or UV radiation. Coil coating is a process in which a thin layer of PVDF is applied to a metal coil, typically made of aluminum or steel. The coil is first cleaned and pretreated, and then the PVDF coating is applied using a variety of methods, such as roll coating, spray coating, or electrocoating. Once the coating has been applied, it is cured using heat or UV light to ensure that it adheres properly to the metal surface. PVDF Coated Aluminium Coil is commonly used in a range of applications, including in the construction industry for building facades, roofing systems, and siding. It is also used in the automotive and transportation industries, as well as in the manufacturing of appliances and other consumer products. PVDF coated aluminium coils are known for their excellent performance characteristics, including high resistance to fading, chalking, and peeling, as well as excellent adhesion to the metal surface. They are also resistant to a wide range of chemicals, making them suitable for use in industrial and commercial environments. Product parameter-PVDF Coated Aluminum Coil Thickness: 0.18mm-1.6mm Usual Alloy: 1100, 8011, 3003, 5052, others alloy: according to your requirement. Per coil weights: 5MT Usual Width: 1200mm, 1240mm, 1270mm, 1520mm, 1570mm, others width: according to your requirments.
Aluminium Coil for Roofings PVDF Coated Aluminium Coil PVDF (polyvinylidene fluoride) coated aluminum coil is a type of coated aluminum that has a PVDF resin coating applied to its surface. This coating provides the aluminum with excellent resistance to weathering, UV radiation, and corrosion. It is also resistant to stains and is easy to clean, making it suitable for use in a variety of applications. PVDF coated aluminum coil is commonly used in the construction industry, particularly for cladding buildings and other structures. It is also used in the manufacture of roofing, siding, and flashing, as well as for window and door frames. PVDF coated aluminum coil is also used in the transportation industry, for applications such as aircraft and automotive parts. It is also used in the production of signage and other types of visual displays. PVDF Application Process There are several steps involved in the PVDF (polyvinylidene fluoride) coating process: Surface preparation: The surface of the aluminum must be properly cleaned and treated to ensure that the PVDF coating adheres properly. This may involve degreasing, sandblasting, and/or etching the surface. Priming: A primer coat is applied to the aluminum surface to help improve the adhesion of the PVDF coating. Applying the PVDF coating: The PVDF coating is applied to the aluminum surface using a variety of methods, such as spraying, roller coating, or curtain coating. Drying: The coated aluminum is then placed in a drying oven to allow the PVDF coating to cure and harden. Quality inspection: The coated aluminum is inspected to ensure that it meets the required standards for thickness, appearance, and performance. Packaging and storage: The coated aluminum is then packaged and stored until it is ready to be shipped to the customer. It is important to follow proper handling and storage procedures during and after the PVDF coating process to ensure that the coated aluminum maintains its optimal performance and longevity. Key Features of PVDF Coated Aluminum Durability: PVDF coated aluminum is resistant to weathering, UV radiation, and corrosion, making it suitable for use in a variety of outdoor applications.
Aluminium Coil for Roofings PVDF (polyvinylidene fluoride) coated aluminum coil is a type of coated aluminum that has a PVDF resin coating applied to its surface. This coating provides the aluminum with excellent resistance to weathering, UV radiation, and corrosion. It is also resistant to stains and is easy to clean, making it suitable for use in a variety of applications. PVDF coated aluminum coil is commonly used in the construction industry, particularly for cladding buildings and other structures. It is also used in the manufacture of roofing, siding, and flashing, as well as for window and door frames. PVDF coated aluminum coil is also used in the transportation industry, for applications such as aircraft and automotive parts. It is also used in the production of signage and other types of visual displays. PVDF Application Process There are several steps involved in the PVDF (polyvinylidene fluoride) coating process: Surface preparation: The surface of the aluminum must be properly cleaned and treated to ensure that the PVDF coating adheres properly. This may involve degreasing, sandblasting, and/or etching the surface. Priming: A primer coat is applied to the aluminum surface to help improve the adhesion of the PVDF coating. Applying the PVDF coating: The PVDF coating is applied to the aluminum surface using a variety of methods, such as spraying, roller coating, or curtain coating. Drying: The coated aluminum is then placed in a drying oven to allow the PVDF coating to cure and harden. Quality inspection: The coated aluminum is inspected to ensure that it meets the required standards for thickness, appearance, and performance. Packaging and storage: The coated aluminum is then packaged and stored until it is ready to be shipped to the customer. It is important to follow proper handling and storage procedures during and after the PVDF coating process to ensure that the coated aluminum maintains its optimal performance and longevity.
PVDF Coated Aluminium PVDF (polyvinylidene fluoride) coated aluminum is a type of coated aluminum that has a PVDF resin coating applied to its surface. This coating provides the aluminum with excellent resistance to weathering, UV radiation, and corrosion. It is also resistant to stains and is easy to clean, making it suitable for use in a variety of applications. PVDF coated aluminum is commonly used in the construction industry, particularly for cladding buildings and other structures. It is also used in the manufacture of roofing, siding, and flashing, as well as for window and door frames. PVDF coated aluminum is also used in the transportation industry, for applications such as aircraft and automotive parts. It is also used in the production of signage and other types of visual displays. PVDF Application Process There are several steps involved in the PVDF (polyvinylidene fluoride) coating process: Surface preparation: The surface of the aluminum must be properly cleaned and treated to ensure that the PVDF coating adheres properly. This may involve degreasing, sandblasting, and/or etching the surface. Priming: A primer coat is applied to the aluminum surface to help improve the adhesion of the PVDF coating. Applying the PVDF coating: The PVDF coating is applied to the aluminum surface using a variety of methods, such as spraying, roller coating, or curtain coating. Drying: The coated aluminum is then placed in a drying oven to allow the PVDF coating to cure and harden. Quality inspection: The coated aluminum is inspected to ensure that it meets the required standards for thickness, appearance, and performance. Packaging and storage: The coated aluminum is then packaged and stored until it is ready to be shipped to the customer. It is important to follow proper handling and storage procedures during and after the PVDF coating process to ensure that the coated aluminum maintains its optimal performance and longevity.
1)Alloy type 1100 or 3003 2) thickness Alloy: we can offer 0.25mm to 1.5mm 3) Coating material: PVDF or PE 4) Width: we can offer 600mm to 1550mm 5) Color: we can offer various colors 6) Quantity: min order is 5T for each size and color
One of the largest integrated primary producer of aluminium in Asia. With a pan-Indian presence that encompasses the entire gamut of operations, from bauxite mining, alumina refining, aluminium smelting to downstream rolling, extrusions and recycling, Hindalco enjoys a leadership position in aluminium and downstream value-added products in India. Our Indian aluminium operations are integrated and consist of bauxite mining, alumina refining, smelting and converting primary metal into value-added products. We have dedicated sources for critical raw materials such as bauxite, power and coal. We also have committed supply sources for auxiliary chemicals. Our finished products include alumina, primary aluminium in the form of ingots, billets and wire rods, value-added products such as rolled products, extrusions and foils. Metallurgical alumina is used for our own captive needs. Chemical alumina and hydrates are used in range of industries including water treatment, fillers in cables and plastics, refractories and ceramics, glass among others. Our facilities are in regions close to raw material sources, low cost and available labour and demand markets. This helps in reducing costs and improving profit margins. The technology upgrade has resulted in higher utilisation rates at our plants and improved efficiency. We believe implementation of superior technology not only reduces costs but also provides superior and customised products, thus, improving our sales. Hindalcoâ??s integrated complex at Renukoot, in Uttar Pradesh, India, houses an alumina refinery, an aluminium smelter and facilities for the production of semi-fabricated products. Power is sourced from our Renusagar power plant, located about 45km from Renukoot. Our facilities also include an aluminium smelter and an aluminium FRP facility (for rolled products, extrusions products and wire rods) at Hirakud (Odisha) with a captive power plant and coal mine, and alumina refinery at Muri (Jharkhand). Our Chemical grade alumina plant is located at Belagavi (Karnataka), and rolling mills at Belur (West Bengal), Taloja near Mumbai and Mouda near Nagpur (Maharashtra). Foil rolling facility is situated at Mouda near Nagpur (Maharashtra) and our extrusion plant at Alupuram (Kerala). Hindalco's new age smelters at Aditya (Odisha) and Mahan (Madhya Pradesh), operating on state-of-the-art AP36 technology, have not only resulted in expansion of our capacities but also improved cost-efficiency of our operations. These smelters have their own captive power plants and source alumina from Utkal, our 100% subsidiary. Utkal Alumina (Odisha) is a world class refinery with one of the lowest cost structure in the world. The bauxite for Utkal is sourced from Baphlimali mines by a 18 kilometer long conveyor, one of its kind in the world.
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
All material meets ASTM or AMS specifications with ultrasonic testing as required Test certificates are maintained to ensure full material traceability Waterjet cut parts for special shapes can be provided with close tolerances and minimal distortion Grades 1100 2024 2124 3003 5052 5083 5086 6013 6061 7050 7075 7475 ProductAluminium sheet plates coil BrandRenaissance Pipe Fitting Inc SizesRefer the specification ConditionNew Rating44 based on 45 reviews priceStart from 50 USD
Metal products, all types of metals steel pipe seamless and welded, galvanized steel coil, steel sheet PPGI, stainless sheet, aluminum coil, ingots scrap angel bar, H steel beam, and deformed steel bar are widely applied to auto industry, household appliances, construction industry, and highway guardrail construction.Trading, recycling
All apparel clothing, garments and clothing like formal shirts, casual shirts, t shirts and polo shirts, hoodies, night suit, track suit, jackets, denim pants, sports wear.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
3 Roda Mosquito Qoil - The original product from Indonesia. - Can Expel Mosquito and Insect. - Type Available : - 8 Hours Green - 8 Hours Green Refill - 10 Hours Green - 10 Hours Red - 12 Hours Green
Cast iron skulls, cast iron borings and turnings, steels skulls, eaf skulls, plate iron, mill scale, metal scrap, incinerated scrap (e46).
Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps.
Ready stock Hartalega Coats 200 pcs ready stock.
Aluminium dross available 30% Recovery and 98% purity with 5 to 10% pure metal.
Bonny light crude oil (blco), yemen light crude oil, jet fuel, diesel d2, d6, mazut, base oil, gasoline, cocoa bean and powder, petroleum products, coal, diesel, bitumen, petcoke, aluminum, hms, charcoal, wheat, sugar, milk, soybean, corn, beef, chicken, flour, meal, rye, frozen vegetable, okra, french fries, etc..Procurement, exporter
Gypsum rocks, gypsum powder, rock salt (industrial salt and deicing salt), food grade salt, sodium bicarbonate, limestone, white limestone (marble chips), sulphur (granular, lumps).
Nickel sludge, zinc ash, copper ore, lead ore, chrome ore, manganese ore, bauxite ore, iron ore, iron ore pellets, tin ore, ir64 rice, ir 64 5% broken rice, zinc ash, raw red chilli, chrome ore, iron skull, 1121 sella white basmati rice, 3 ply surgical masks.
