Electric U-Shaped Hoop

ELECTRIC MOTOR 10 HP-60 HZ, 900 RPM, NEMA D SERVICE FACTOR 1.15, 460V, PHASE 3, INSULATION CLASS F, BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED, BEARING BRAND NSK, SHAFT MATERIAL 1045 CARBON STEEL, COLOUR WHITE. ELECTRIC MOTOR 15 HP-60 HZ, 900 RPM, NEMA D, SERVICE FACTOR 1.15, 460V, PHASE 3, INSULATION CLASS F, BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED, BEARING BRAND NSK, SHAFT MATERIAL 1045 CARBON STEEL, COLOUR WHITE. ELECTRIC MOTOR 20 HP-60 HZ, 900 RPM, NEMA D, SERVICE FACTOR 1.15, 460V, PHASE 3, INSULATION CLASS F, BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED, BEARING BRAND NSK, SHAFT MATERIAL 1045 CARBON STEEL, COLOUR WHITE. ELECTRIC MOTOR 30 HP-60 HZ, 900 RPM, NEMA D, SERVICE FACTOR 1.15, 460V, PHASE 3, INSULATION CLASS F, BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED, BEARING BRAND NSK, SHAFT MATERIAL 1045 CARBON STEEL, COLOUR WHITE.

Emitting light RedLED 630nm Operating voltage DC:10 30VDC ±10%(Ripple P-P:10%Max) Current consumption 15mA Max Load current 100mA Max at DC 24V Output type N=NPN.NO P=PNP.NPN Protection circuit Reversed supply ciruit protection,short citcuit protection output Response time 0.3 ms Max Insulation resistance 20M min.(DC500V) Voltage withstandatility AC1000V 60Hz for 60 Sec Operating temperature -10 C +45 C(No freezing allowed ) Ambient hunidity 35%~95%RH Storage temperarure -10 C+55C(No freezing allowed ) Storage hunidity 35%~95%RH Material ABS Wiring method 2.6 2M/4-wires Protection degree IP64 Weight Approx.18.5g

Electrical Conduit Box

U-L Shape MoSi2 Heating Elements MoSi2 heating element can usually make use of furnace temperature from 1300C to 1900C. It is extensively used in the industries of metallurgy, glass, ceramic refractory, crystal electronic device, industrial furnace manufacturer etc. It is an essential ideal element when the products are sintering in the high temperature.

MoSi2 heating element is a type of resistance heating element composed of high purity Molybdenum Disilicide.When heated toa high temperature in an oxidizing atmosphere,a layer of compact quartz qlass forms on the surface of the element which withstands oxidation.In an oxidizing atmosphere,its maximum temperature canreach1800 and its applicable temperature is 500~1700C. It can be widely used as heating elements in high temperature furnaces for a variety of industries including ceramics, magnets, glass metallurgy, refractory and many others.

U shaped iron wire

In different application setups, there are different configurations for electrical cross arm. The mate- rial is steel. Finish: Hot-dip galvanized.Standard: ASTM123-78 Size(mm) Finish Approximately Weight (Kg./Pcs.) 65x65x6x508 Hot dip galvanized 2.53 65x65x6x965 Hot dip galvanized 5.6 50x50x4x508 Hot dip galvanized 1.53 50x50x4x965 Hot dip galvanized 2.8

Pole Top Pin

Catalog no. - JY-F0213 CLEVIS OPENING - 85.7 ANSI Insulator weight/100pcs - 53-2& 53-3 Weight kg/100pcs -50